Let’s Talk About Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver offers a modern solution for aging eyes on classic revolvers. Evolution Gun Works (EGW) has created a mount that allows shooters to easily attach a Leupold DeltaPoint Pro, or compatible optic, to their Ruger revolver. This mount effectively replaces the rear sight, offering a significant upgrade in target acquisition speed and accuracy, particularly for those struggling with traditional iron sights.
My journey to finding this mount stemmed from a common problem: my aging eyes. That crisp sight picture I once enjoyed with my Ruger Blackhawk had faded, making accurate shooting a challenge. I needed a solution that didn’t involve selling my beloved revolver, and this mount, combined with a suitable micro red dot, seemed like the perfect answer.
Unboxing the EGW mount revealed a simple, yet robust design. The hard coat anodized 7075 aluminum felt reassuringly solid, and the matte black finish matched my Blackhawk’s aesthetic reasonably well. It’s a lightweight piece, which is crucial for maintaining the balance of the revolver.
I considered other options, including having a custom dovetail milled directly into the frame. Ultimately, the EGW mount won out due to its ease of installation and reversibility. It offered a no-permanent-modification solution that I could test without committing to irreversible changes.
My first impression was a mix of excitement and cautious optimism. The mount appeared well-made, but the single-screw attachment point did raise some concerns about long-term stability. However, the design utilizing the rear tabs to absorb recoil seemed promising.
Real-World Testing: Putting Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver to the Test
First Use Experience
My initial testing took place at my local outdoor range. The weather was clear and sunny, providing optimal conditions for evaluating the red dot sight and the EGW mount. I was primarily focused on assessing the mount’s stability and the overall improvement in target acquisition.
The difference was immediately noticeable. With the red dot sighted in, I was able to acquire targets much faster and more accurately than with the original iron sights. The mount held zero throughout my initial testing session, even with the recoil from .45 Colt rounds.
Installation, while relatively straightforward, did require a bit of fine-tuning. The dovetail fit was snug, necessitating some careful tapping with a nylon punch to center the mount. After about an hour I had the mount installed with the DPP mounted and zeroed.
Extended Use & Reliability
After several months of regular use, the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver has proven to be surprisingly durable. There are no signs of loosening or shifting, and the finish remains in excellent condition, despite exposure to varying weather conditions. The small single screw hasn’t failed me and has remained in place even under heavy recoil.
Cleaning and maintenance are simple. A quick wipe down with a lightly oiled cloth is all it takes to keep the mount looking and functioning its best. I always ensure to re-tighten the screw when cleaning to confirm it has remained in place.
Compared to my previous experience with the original iron sights, the EGW mount, paired with a red dot, has significantly improved my shooting accuracy and speed. It has breathed new life into my Blackhawk, making it a joy to shoot again. This mount far exceeded my expectations and has rekindled my passion for the revolver.
Breaking Down the Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver
Specifications
- Manufacturer: Evolution Gun Works. A well-known name in the firearms accessories industry.
- Red Dot Sights-Footprint: Deltapoint Pro. This is compatible with the Leupold DeltaPoint Pro and other sights sharing the same footprint.
- Included Accessories: Screws. All the necessary hardware is included for a straightforward installation.
- Optic Cut: Not Applicable. The mount is a dovetail replacement, not an optic cut on the firearm itself.
- Fabric/Material: 7075 Aluminum. This provides an excellent balance of strength and weight.
- Color: Black. It is designed to seamlessly integrate with most revolver finishes.
- Mount Type: Dovetail. Installs into the existing rear sight dovetail.
- Fit: Ruger Revolver Sight. Specifically designed for Ruger revolvers.
- Length: 1.604 in. A compact design that doesn’t add excessive bulk.
- Width: 0.99 in. Provides a stable platform for the red dot sight.
- Finish: Matte Black Hard Coat Anodized. Offers excellent corrosion resistance and durability.
- Gun Make: Ruger. Guarantees compatibility with Ruger revolvers.
- Gun Type: Pistol. Designed for handguns.
- Condition: New. A brand-new product.
These specifications are important because they dictate the mount’s durability, compatibility, and overall performance. The 7075 aluminum construction ensures that the mount can withstand the recoil of a revolver, while the Deltapoint Pro footprint allows for a wide range of red dot sight options. The single drawback to consider is the single screw to hold it in place.
Performance & Functionality
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver performs its job admirably. It provides a stable and secure platform for mounting a red dot sight, resulting in improved accuracy and target acquisition speed. This mount gives shooters the ability to shoot their revolvers in a more modern and effective manner.
The mount’s primary strength lies in its simplicity and effectiveness. The dovetail design ensures a secure fit, and the low profile minimizes interference with the revolver’s handling. The only weakness, as mentioned earlier, is the single screw, but the mount’s design mitigates this issue by utilizing the rear tabs for impact absorption.
Overall, the EGW mount has exceeded my expectations. It has transformed my aging Ruger Blackhawk into a highly accurate and enjoyable shooting platform. It has given me a new view on classic revolvers.
Design & Ergonomics
The EGW mount features a clean and functional design. The matte black finish blends seamlessly with the revolver’s aesthetics, and the low profile minimizes any added bulk. It is a very low profile mount and keeps the red dot close to the revolver.
The build quality is excellent. The 7075 aluminum feels solid and durable, and the hard coat anodized finish provides excellent corrosion resistance. The mount is lightweight, which helps maintain the revolver’s balance.
The mount is user-friendly, with no significant learning curve. Installation is straightforward, and once installed, the mount requires minimal maintenance. This makes it easy to swap the mount for a new one if needed.
Durability & Maintenance
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver is built to last. The 7075 aluminum construction and hard coat anodized finish provide excellent durability and corrosion resistance. It is a very well made and durable mount.
Maintenance is simple. Regular cleaning with a lightly oiled cloth is all it takes to keep the mount in excellent condition. Be sure to check the set screw to confirm it hasn’t loosened up during a range day.
Accessories and Customization Options
The mount comes with the necessary screws for installation. The primary customization option is the choice of red dot sight that is mounted to it.
The mount is compatible with any red dot sight that shares the Leupold DeltaPoint Pro footprint. This allows for a wide range of optic choices, including the Holosun 407K/507K (with minor modification to the mount as noted by the manufacturer). Shooters can select an optic that best suits their needs and preferences, turning this mount into a valuable and useful tool.
Pros and Cons of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver
Pros
- Significantly improves target acquisition speed and accuracy, especially for those with aging eyes.
- Durable 7075 aluminum construction with a hard coat anodized finish.
- Easy to install, with no permanent modifications to the firearm required.
- Compatible with a wide range of red dot sights sharing the Leupold DeltaPoint Pro footprint.
- Relatively inexpensive upgrade that breathes new life into classic revolvers.
Cons
- The single screw attachment point may raise concerns about long-term stability, although the design mitigates this.
- May require minor fitting during installation to achieve perfect alignment.
Who Should Buy Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver?
This mount is perfect for Ruger revolver owners who are looking to improve their shooting accuracy and speed, particularly those who are struggling with traditional iron sights due to aging eyes or other vision impairments. It is a great option for recreational shooters who are looking for a way to enhance their shooting experience. It is also an option for hunters who want to use their revolvers for deer hunting.
This product may not be ideal for those who prefer the classic look and feel of traditional iron sights, or those who are not comfortable with installing aftermarket accessories on their firearms. This product may also not be ideal for those who have a very specific setup in mind.
A must-have accessory is a compatible red dot sight, such as the Leupold DeltaPoint Pro or Holosun 407K/507K. Blue Loctite is also a must have, due to the single screw that is used to attach the mount to the revolver.
Conclusion on Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Ruger Revolver is an excellent upgrade for Ruger revolver owners who want to improve their shooting accuracy and speed. It provides a stable and secure platform for mounting a red dot sight, and it is relatively easy to install. This mount modernizes a classic platform.
The price of $49.99 is justified by the mount’s durability, compatibility, and overall performance. It is a relatively inexpensive upgrade that can significantly enhance the shooting experience. It is a very simple and useful tool that enhances anyones ability to shoot a handgun.
I would personally recommend the EGW mount to any Ruger revolver owner who is looking for a way to improve their shooting. It has transformed my Ruger Blackhawk into a highly accurate and enjoyable shooting platform, and I am confident that it will do the same for others. If you’re struggling with iron sights on your Ruger revolver, give this mount a try – you won’t be disappointed! This is a great and easy to install product that enhances the shooters ability to shoot and hit targets.