Let’s Talk About Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks offers a dovetail mounting solution for red dot sights on Glock pistols, specifically catering to the Leupold DeltaPoint Pro footprint and others. This mount promises a simple installation process, replacing the rear sight, and providing a stable platform for optics.
My journey to this mount stemmed from a desire to upgrade my Glock 19 for faster target acquisition at the range and potential use in defensive situations. I was specifically seeking a low-profile, reliable mount that wouldn’t require permanent modifications to my firearm.
Upon unboxing, the mount felt solid; the 7075 aluminum construction inspired confidence. The matte black hard coat anodized finish appeared durable and matched the aesthetic of my Glock.
I also considered the Strike Industries Glock Rear Sight Rail and the Trijicon RMR Mount for Glock pistols, but I chose the Evolution Gun Works mount primarily because of its lower price point and the claim of a tight dovetail fit. I was hoping for a budget-friendly solution that wouldn’t compromise on quality.
My initial reaction was cautiously optimistic. While the mount looked well-made, I was slightly concerned about the potential for it to sit too high, as some user reviews had mentioned, possibly impacting my ability to co-witness with the iron sights.
Real-World Testing: Putting Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks to the Test
First Use Experience
I tested the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks at my local indoor shooting range. The range offers a controlled environment for accuracy testing and allows for quick adjustments.
The installation was straightforward, requiring only a Glock sight pusher tool and a few minutes. Despite initial apprehension, the mount slid into the dovetail slot relatively easily, achieving a snug fit with a few taps.
However, my concerns about the height of the mount were immediately validated. The Leupold DeltaPoint Pro sat noticeably high, making co-witnessing with the standard Glock sights impossible. This meant I had to rely solely on the red dot, which could be problematic in a situation where the optic failed.
Extended Use & Reliability
After several weeks of use and approximately 500 rounds fired, the mount remained securely in place. There were no signs of loosening or shifting, which speaks to the integrity of the dovetail design.
The matte black hard coat anodized finish held up well, showing no significant wear marks or scratches. Cleaning was a simple process, requiring only a quick wipe-down with a cloth and solvent.
Unfortunately, the height issue persisted, and I never fully grew accustomed to the increased offset. Ultimately, I found that while the mount was functional and reliable, the inability to co-witness detracted significantly from its overall usability, especially when compared to direct milled slides I’ve used in the past.
Breaking Down the Features of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks
Specifications
- Manufacturer: Evolution Gun Works
- Red Dot Sights-Footprint: Deltapoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (with modification)
- Included Accessories: Screws
- Optic Cut: Not Applicable
- Fabric/Material: 7075 Aluminum
- Color: Black
- Mount Type: Dovetail
- Fit: Most Glock Sights
- Length: 1.604 in
- Width: 0.99 in
- Finish: Matte Black Hard Coat Anodized
- Gun Make: Glock
- Gun Type: Pistol
- Condition: New
These specifications are important because they define the compatibility and durability of the mount. The 7075 aluminum provides a good balance of strength and weight, while the wide range of compatible optic footprints offers versatility.
Performance & Functionality
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks performs its primary function – securing a red dot sight to a Glock – adequately. The mount remained stable during firing, and the screws provided sufficient clamping force.
However, the height of the mount is a significant weakness, preventing co-witnessing and potentially affecting accuracy at close ranges due to the increased parallax. While the mount is functional, it doesn’t fully meet my expectations due to this limitation.
Design & Ergonomics
The build quality is decent, with clean machining and a durable finish. The weight of the mount is negligible, adding minimal bulk to the pistol.
However, the design prioritizes ease of installation over a truly low-profile footprint. The resulting height makes it less user-friendly for those accustomed to co-witnessing or carrying concealed.
Durability & Maintenance
The 7075 aluminum construction and hard coat anodized finish suggest that the mount will be durable and long-lasting. After several weeks of use, there are no signs of corrosion or significant wear.
Maintenance is simple, requiring only occasional cleaning with a cloth and solvent. The design does not incorporate any complex mechanisms or small parts that could be prone to failure.
Accessories and Customization Options
The mount comes with the necessary screws for attaching a Leupold DeltaPoint Pro or compatible optic. It accommodates a variety of red dot sights.
It’s compatible with the Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, and Holosun 407K/507K (with modification). However, there are no other significant customization options or accessories specifically designed for this mount.
Pros and Cons of Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks
Pros
- Affordable price point compared to direct milling or other mounting solutions.
- Easy installation, requiring only basic tools.
- Durable 7075 aluminum construction with a matte black hard coat anodized finish.
- Compatible with a variety of red dot sight footprints, offering versatility.
- Secure and stable mounting platform.
Cons
- Sits too high, preventing co-witnessing with standard Glock iron sights.
- Increased height above the bore can affect accuracy at close ranges due to parallax.
- Limited customization options beyond optic selection.
Who Should Buy Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks?
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks is perfect for budget-conscious shooters who want to add a red dot sight to their Glock without permanent modifications. It’s also suitable for those who prioritize ease of installation over a truly low-profile design.
Those who should skip this product are shooters who demand co-witnessing with iron sights or require the lowest possible optic height for concealed carry or competition. Direct milled slides or alternative mounting solutions might be more appropriate for these users.
A must-have accessory would be taller suppressor height sights, if the user wishes to have any sort of backup sighting system. This would mitigate the issue of not being able to co-witness.
Conclusion on Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks
The Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks offers an affordable and easy way to mount a red dot sight to a Glock pistol. While the build quality and stability are commendable, the significant height increase is a major drawback that limits its overall usability.
The price is certainly justified for what it offers, especially if you’re on a tight budget and not concerned about co-witnessing. However, the increased height might be a deal-breaker for more serious shooters.
Personally, I would recommend this mount with reservations. If co-witnessing and a low-profile design are not priorities, then it’s a decent option. However, if those factors are important, I’d suggest exploring alternatives, even if they come at a higher cost. Consider the trade-offs carefully before making a decision. Ultimately, while functional, the Evolution Gun Works Leupold DeltaPoint Pro Sight Mount For Glocks highlights the adage that you often get what you pay for.