The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber Made a Bold First Impression
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber promises enhanced comfort and control for the already formidable FN SCAR platform. Manufactured by Ergo, this grip aims to address a common complaint: the stock SCAR grip’s ergonomics can leave something to be desired, especially during extended use.
As an experienced tactical gear specialist, I’ve spent years searching for the perfect grip to complement high-performance rifles. The standard SCAR grip, while functional, always felt a little too slim and lacking in palm support for my larger hands.
Upon unboxing the Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber, I immediately noticed the quality of the overmolded rubber. It felt substantial, grippy, and offered a reassuring tactile feel that promised a significant improvement over the factory grip.
Compared to the Magpul MOE-K2 grip (known for its aggressive texture) and the Hogue AR-15 grip (renowned for its comfortable palm swells), the Ergo grip seemed to strike a balance between positive control and ergonomic comfort. The MOE-K2, while offering excellent grip, can be abrasive during long shooting sessions. The Hogue, while comfortable, sometimes lacks the aggressive texture needed for demanding tactical situations.
My first impression was one of cautious optimism. The grip felt good in my hand, but the real test would be on the range, under pressure.
Real-World Testing: Putting Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber to the Test
First Use Experience
I first tested the Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber at my local shooting range during a carbine course. The day involved rapid target acquisition drills, transitions between targets, and movement while shooting.
The overmolded rubber provided excellent grip even with sweaty hands after several magazines. The slight finger grooves promoted a consistent and positive grip, enhancing my control during rapid firing strings.
One initial issue was the added width, it felt different, but not necessarily worse, just something to get used to. However, the ergonomic design and the palm swell quickly proved their worth, significantly reducing fatigue during extended shooting.
Extended Use & Reliability
After several months of use and thousands of rounds downrange, the Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber has proven to be a durable and reliable upgrade. There’s been minimal wear and tear, even after dragging the SCAR through brush and using it in various training exercises.
Cleaning is incredibly simple; a quick wipe down with a damp cloth removes any dirt or grime. The rubber resists absorbing oils and solvents, maintaining its grippy texture even after cleaning with CLP.
Previously, I experienced hand fatigue and inconsistent grip issues with the stock SCAR grip during long training days. The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber has completely eliminated these issues, providing a noticeable improvement in both comfort and control.
Breaking Down the Features of Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber
Specifications
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is designed specifically for the FN SCAR 16 and 17 platforms. It features a bolt-on design, requiring no permanent modifications to the rifle.
The grip is constructed from a rigid polymer core with a durable overmolded rubber exterior. This construction provides both strength and a comfortable, non-slip surface.
- Ergonomic Design: The grip features an ergonomic shape with a rear upper extension that fills the web of the hand. This enhances comfort and recoil control.
- Overmolded Rubber: The overmolded rubber provides a secure and comfortable grip in various conditions. It also absorbs recoil, reducing hand fatigue.
- Slight Finger Grooves: The grip features slight finger grooves for a positive and consistent grip. These grooves are subtle enough to accommodate a wide range of hand sizes.
- Tapered Width: The grip’s width is tapered from top to bottom. This allows for a more natural and comfortable hand position.
- Ambidextrous Design: The grip is designed to be equally comfortable and functional for both left-handed and right-handed shooters.
These specifications are vital because they directly impact the shooter’s ability to maintain a consistent and comfortable grip. This translates to improved accuracy, faster target acquisition, and reduced fatigue, especially during prolonged use.
Performance & Functionality
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber performs exceptionally well in enhancing the overall shooting experience with the SCAR platform. The grip’s design promotes a more natural and comfortable hand position, leading to improved control and accuracy.
The overmolded rubber provides a secure grip, even in wet or sweaty conditions. This ensures consistent control and reduces the risk of slippage.
The grip’s primary strength lies in its ability to enhance comfort and reduce fatigue. The rear upper extension fills the web of the hand, providing support and distributing recoil more evenly. The slight finger grooves promote a consistent grip, which is vital for maintaining accuracy during rapid fire.
The only minor weakness is that the slightly increased grip width may take some getting used to for shooters with smaller hands. However, the ergonomic design and improved control quickly outweigh this minor adjustment.
Design & Ergonomics
The build quality of the Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is excellent. The materials used feel durable and high-quality. The grip is lightweight and adds minimal weight to the rifle.
The grip is extremely user-friendly. Installation is simple and straightforward, requiring only basic tools. There’s no learning curve; the grip feels immediately comfortable and intuitive.
Durability & Maintenance
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is built to last. The rigid polymer core and durable overmolded rubber can withstand years of use and abuse.
Maintenance is minimal. A quick wipe down with a damp cloth is all that’s needed to keep the grip clean and functional. The rubber is resistant to oils and solvents, further simplifying maintenance.
Accessories and Customization Options
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is a standalone product and does not require any additional accessories for basic functionality. However, it is compatible with any SCAR 16 or 17 that accepts aftermarket grips.
The grip itself doesn’t offer additional customization options beyond its standard design. However, it’s designed to work seamlessly with other aftermarket SCAR accessories, such as improved triggers, charging handles, and optics.
Pros and Cons of Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber
Pros
- Enhanced Comfort: The ergonomic design and rear upper extension significantly improve comfort, especially during extended use.
- Improved Grip: The overmolded rubber provides a secure and non-slip grip in various conditions.
- Reduced Fatigue: The grip’s design helps distribute recoil more evenly, reducing hand fatigue.
- Easy Installation: The bolt-on design requires no permanent modifications to the rifle and is easy to install.
- Ambidextrous Design: Equally comfortable and functional for both left-handed and right-handed shooters.
Cons
- Slightly Increased Width: The increased grip width may take some getting used to for shooters with smaller hands.
- No aggressive texturing: Shooters who prefer a very aggressive texture might find the grip texture too subtle.
Who Should Buy Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber?
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is perfect for anyone looking to improve the ergonomics and handling of their FN SCAR 16 or 17. This includes tactical shooters, competitive shooters, and recreational shooters who value comfort and control.
This grip is also a great option for shooters with larger hands who find the stock SCAR grip too slim. The added palm support and ergonomic design will provide a more comfortable and secure grip.
Shooters who prefer a very aggressive grip texture might want to consider other options. However, most users will find the Ergo grip’s texture to be more than adequate.
A must-have modification to go along with this grip is an upgraded trigger system to really enhance accuracy and overall shooting performance of the SCAR.
Conclusion on Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber
The Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber is a fantastic upgrade for the FN SCAR platform. It significantly improves comfort, control, and overall shooting experience.
At a price of $32.99, this grip represents an excellent value proposition. The improved ergonomics and enhanced control are well worth the investment.
I would wholeheartedly recommend the Ergo Sure Grip Gen 2 FN SCAR 16, 17 Ambidextrous Overmolded Rubber to anyone looking to improve their SCAR’s ergonomics and handling. Upgrade your SCAR today and experience the difference a quality grip can make!