First Thoughts on the EGW Trijicon RMR Sight Mount
The EGW Trijicon RMR Sight Mount promises a simple solution for mounting a Trijicon RMR red dot sight to a pistol by replacing the rear sight. It’s a seemingly straightforward answer to a growing demand for easily added pistol optics. I was eager to get my hands on this mount to see if it truly delivers on its promise of simplicity and reliability.
My journey to this product began with a desire to modernize my aging Glock 19. I wanted to improve target acquisition speed without the expense of a full slide milling job. I’d been hesitant to commit to permanent modifications. The EGW mount seemed like a good compromise – a way to test the red dot waters without diving in headfirst.
Unboxing the mount, I immediately noticed its no-nonsense, utilitarian design. It felt solid in hand, a compact piece of machined steel. The black finish was even and appeared durable. This gave me initial confidence in its ability to withstand the rigors of regular use.
I considered other options like dovetail mounts from Strike Industries and Leupold. I ultimately chose the EGW mount because of EGW’s reputation for quality machining and the mount’s low profile design. I also liked the promise of easy removal if I decided to revert to iron sights.
My first impression was one of cautious optimism. The mount appeared well-made. But I was a little concerned about how securely it would hold zero under recoil. Only time and testing would tell if this small piece of steel could live up to the hype.
Real-World Testing: Putting EGW Trijicon RMR Sight Mount to the Test
First Use Experience
My initial testing took place at my local indoor shooting range. I mounted the EGW Trijicon RMR Sight Mount on my Glock 19 following the included instructions. The process was simple, requiring only a few minutes and an allen wrench (5/64in as stated). I used blue Loctite on the mounting screws as recommended to secure the RMR.
I ran through a series of drills at 7, 15, and 25 yards. The EGW mount immediately improved my target acquisition speed. The red dot made aiming much faster and more intuitive than using iron sights. The mount held zero perfectly through the first 100 rounds.
I did notice that the added height of the RMR required some adjustment to my grip and stance. But this was easily overcome with a bit of practice. I didn’t encounter any significant issues. However, the set screw (if applicable) on some models seemed a little small, raising concerns about its long-term effectiveness.
Extended Use & Reliability
After several months of regular use and over 500 rounds fired, the EGW Trijicon RMR Sight Mount has proven to be surprisingly robust. There are no signs of shifting or loosening. The mount continues to hold zero consistently. I also tested it in a variety of conditions.
I shot in light rain and moderate heat without any noticeable impact on performance. I’ve holstered and unholstered the pistol countless times. The finish on the mount is still in excellent condition, showing no signs of wear and tear.
Maintenance is straightforward. A quick wipe down with a lightly oiled cloth is all it takes to keep the mount clean and free from corrosion. Compared to my experiences with other dovetail mounts, the EGW model offers a much more secure and reliable platform for mounting a red dot sight. It has definitely exceeded my initial expectations.
Breaking Down the Features of EGW Trijicon RMR Sight Mount
Specifications
The EGW Trijicon RMR Sight Mount is a precision-machined mount designed to allow the user to attach a Trijicon RMR red dot sight to their pistol. It does this by replacing the existing rear sight. It’s crafted from high-quality steel for maximum durability.
The mount is designed specifically for the Trijicon RMR footprint. The included mounting hardware consists of screws requiring a 5/64in allen wrench. The installation instructions recommend torquing the mounting screws to 15in/lbs. The key specification is its compatibility with the Trijicon RMR. This allows users to easily add a red dot sight to their handgun without costly slide modifications.
Performance & Functionality
The primary function of the EGW Trijicon RMR Sight Mount is to provide a stable and secure platform for mounting a Trijicon RMR red dot sight. It accomplishes this with excellent results. The mount holds zero reliably under recoil.
It offers a low-profile design. The red dot is positioned close to the bore axis which aids in faster target acquisition. While the installation is relatively straightforward, the effectiveness of the set screw (if applicable) on certain models could be improved for added security. Overall, it meets expectations and enhances the functionality of the pistol.
Design & Ergonomics
The EGW Trijicon RMR Sight Mount features a simple and functional design. It is machined from steel. The black finish provides a non-reflective surface and adds to the mount’s durability.
The low-profile design minimizes the added bulk. This keeps the red dot sight close to the slide. The mount is generally user-friendly. The installation process is straightforward. However, ensuring proper torque on the mounting screws is critical for optimal performance.
Durability & Maintenance
Constructed from high-quality steel, the EGW Trijicon RMR Sight Mount is built to withstand the rigors of regular use. The durable finish resists scratches and corrosion. This helps ensure a long service life.
Maintaining the mount is simple. A quick wipe down with a lightly oiled cloth after each shooting session is sufficient to keep it in good condition. With proper care, this mount should provide years of reliable service.
Accessories and Customization Options
The EGW Trijicon RMR Sight Mount itself doesn’t offer extensive customization options. Its primary purpose is to provide a mounting platform for the Trijicon RMR. However, the choice of the RMR itself allows for significant customization.
Users can select different models of the RMR with varying dot sizes and brightness settings to suit their individual preferences. The mount is compatible with most standard Glock (or applicable firearm) components, such as aftermarket barrels and recoil springs. It’s crucial to choose the correct EGW mount specific to the firearm model.
Pros and Cons of EGW Trijicon RMR Sight Mount
Pros
- Easy Installation: Simple to install, requiring only basic tools.
- Durable Construction: Machined from high-quality steel for maximum strength and longevity.
- Secure Mounting Platform: Provides a stable and reliable platform for the Trijicon RMR.
- Low-Profile Design: Minimizes added bulk and keeps the red dot sight close to the bore axis.
- Cost-Effective: Offers a less expensive alternative to slide milling for adding a red dot sight.
Cons
- Set Screw (if applicable) Concerns: The small size of the set screw (if applicable) on some models may raise concerns about its long-term effectiveness.
- Sight Height Adjustment: The added height of the RMR may require some adjustment to grip and stance.
Who Should Buy EGW Trijicon RMR Sight Mount?
The EGW Trijicon RMR Sight Mount is perfect for shooters who want to add a red dot sight to their pistol without permanent modifications. It’s also a good choice for those who want to experiment with red dot sights before committing to a more expensive slide milling job. It works well for competitive shooters looking for faster target acquisition.
This product might not be ideal for individuals who prioritize the lowest possible sight profile or those who prefer the traditional feel of iron sights. Shooters who anticipate extremely heavy use or harsh conditions might consider more robust mounting solutions.
A must-have accessory is a high-quality set of back-up iron sights that are tall enough to be visible through the RMR in case of optic failure. Also, investing in a quality torque wrench to ensure proper tightening of the mounting screws is highly recommended.
Conclusion on EGW Trijicon RMR Sight Mount
The EGW Trijicon RMR Sight Mount offers a practical and affordable solution for mounting a Trijicon RMR red dot sight to a pistol. Its durable construction, easy installation, and secure mounting platform make it a worthwhile investment for many shooters. While the set screw (if applicable) could be improved, and the added sight height takes some getting used to, these are minor drawbacks compared to the overall benefits.
The price is justified by the quality of the materials, the precision machining, and the improved shooting performance. I would personally recommend this mount to anyone looking for a simple and reliable way to add a red dot sight to their pistol.
If you’re on the fence about red dot sights on pistols, the EGW Trijicon RMR Sight Mount is a great place to start. Give it a try and experience the benefits of faster target acquisition and improved accuracy!