EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue Review

First Thoughts on the EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue

The EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue isn’t exactly the kind of product that sets your pulse racing. It’s a small, unassuming part, but in the world of 1911 customization and performance tuning, it can make a world of difference. The EGW name is synonymous with quality and precision in gunsmithing components, so I had high expectations right from the start.

I was experiencing inconsistent ejection patterns with my custom-built 1911. The spent casings were flying all over the place, sometimes even hitting me in the face, which isn’t ideal when you’re trying to maintain focus. This pointed to potential extractor issues, and a properly fitted firing pin stop is crucial for controlling the extractor’s movement.

Upon receiving the EGW Oversized Firing Pin Stop, I immediately noticed the solid feel of the carbon steel. The blued finish was even and clean. Compared to a standard, possibly worn, GI-spec firing pin stop, the EGW part felt significantly more substantial and precisely machined.

I considered a few other brands known for 1911 parts, but EGW’s reputation and the specific design features of this particular firing pin stop (oversized dimensions, radiused corners, etc.) swayed me. I was hoping for a reliable fix to my ejection problems, and EGW seemed like the most promising solution. I was cautiously optimistic, knowing that proper fitting would be essential for optimal performance.

Real-World Testing: Putting EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue to the Test

First Use Experience

My initial testing took place at my local shooting range, an outdoor facility with covered firing lanes. I specifically chose a day with varied lighting conditions to see if any glare from the blued finish would be an issue (it wasn’t). I was using a 1911 chambered in .45 ACP, but the EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue is designed for 9mm, .38 Super, .40 S&W, and 10mm cartridges as well, making it a versatile upgrade.

Fitting the firing pin stop required some careful filing and fitting, as expected with an oversized part. The instructions (which were not included, but readily available online) were clear. Once installed, I ran several magazines of different ammunition types (ball, hollow point, and some +P loads). The most noticeable difference was the consistent ejection pattern; cases were now ejecting in a much tighter group.

The initial installation took about an hour, including the fitting process. There were no major issues during the fitting. However, without proper tools and knowledge, fitting this part can be quite difficult.

Extended Use & Reliability

After several range sessions and approximately 500 rounds fired, the EGW Oversized Firing Pin Stop has held up remarkably well. There are no visible signs of wear or deformation. The blued finish remains intact.

Maintenance has been minimal; a simple wipe-down with a lightly oiled cloth after each range visit is all that’s required. The EGW part has significantly outperformed my previous firing pin stop (a standard GI replacement), providing much more consistent and reliable ejection.

Compared to my previous experiences with stock or lower-quality replacement parts, the EGW firing pin stop has proven to be a worthwhile investment in terms of reliability and performance. The difference in ejection consistency and overall smoothness of operation is significant.

Breaking Down the Features of EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue

Specifications

The EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue is constructed from carbon steel, ensuring strength and durability. It is designed for 1911 pistols in 9mm, .38 Super, .40 S&W, and 10mm calibers, as well as .45 ACP if properly fitted. The hardness is rated at 48 Rc, indicating good resistance to wear and deformation.

  • Material: Carbon Steel. Carbon steel offers a good balance of strength, hardness, and machinability.
  • Caliber: 9/38/40/10mm (also works with .45 ACP). Its versatility makes it a good choice for multi-caliber 1911 owners.
  • Series: 80. Designed specifically for Series 80 1911 pistols.
  • Hardness: 48 Rc. This hardness ensures the part will withstand the repeated stresses of firing.
  • Drop In: No. This is an oversized part and requires fitting to your specific 1911.
  • Oversized Dimensions. This is designed to prevent extractor rotation, leading to improved ejection reliability.
  • Radiused Inside Corners. These prevent cracking, increasing the part’s lifespan.
  • .015 Radius on Back Corner. Maintains a square edge to slow slide opening, while breaking the sharp edge.

These specifications contribute to the EGW firing pin stop’s enhanced reliability and durability. The oversized dimensions directly address the common issue of extractor rotation, while the radiused corners prevent stress fractures and extend the part’s service life.

Performance & Functionality

The primary function of the EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue is to provide consistent and reliable ejection by preventing extractor rotation. In my experience, it performed this function admirably. The installation of the EGW firing pin stop dramatically improved ejection consistency, reducing malfunctions and enhancing overall shooting experience.

The part’s strength and precise dimensions inspire confidence. The only potential drawback is the required fitting, which might be beyond the capabilities of inexperienced gun owners. It meets and exceeds my expectations, offering a noticeable improvement over standard firing pin stops.

Design & Ergonomics

The EGW firing pin stop is a simple, functional design. The carbon steel construction provides a solid feel. The blued finish is aesthetically pleasing and helps protect against corrosion.

The non-drop-in nature of the part means that fitting is essential for proper function. However, this is a necessary trade-off for the improved performance that the oversized dimensions provide. The design focuses on functionality and durability.

Durability & Maintenance

The carbon steel construction and 48 Rc hardness rating suggest that the EGW Oversized Firing Pin Stop should last for many thousands of rounds. Regular cleaning and lubrication, as part of normal firearm maintenance, are sufficient to keep the part in good working order.

The part’s simple design means that there are no complicated mechanisms to fail. Replacing this part is straightforward, assuming you have the knowledge and tools for 1911 disassembly and fitting.

Accessories and Customization Options

The EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue does not come with any specific accessories. It’s a standalone replacement part. However, it can be used in conjunction with other aftermarket 1911 parts, such as enhanced extractors and recoil springs, to further optimize performance.

It is compatible with most standard Series 80 1911 frames and slides, but fitting is always necessary. There aren’t specific customization options for the firing pin stop itself. However, its performance can be tailored through other modifications.

Pros and Cons of EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue

Pros

  • Dramatically improves ejection consistency and reliability. The most important benefit.
  • Durable carbon steel construction with a hardness of 48 Rc. Ensures long-lasting performance.
  • Oversized dimensions prevent extractor rotation. Addresses a common source of 1911 malfunctions.
  • Radiused inside corners prevent cracking and extend service life. Enhances the part’s longevity.
  • Relatively inexpensive upgrade. Offers significant performance gains for a reasonable price.

Cons

  • Requires fitting by a qualified gunsmith or experienced user. Not a drop-in part; requires time and skill to install.
  • Blued finish may wear over time with heavy use. Though primarily cosmetic, some users may prefer a more durable coating.


Who Should Buy EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue?

Perfect for: 1911 owners experiencing inconsistent ejection patterns, gunsmiths looking for high-quality components for custom builds, competitive shooters seeking enhanced reliability, and anyone who wants to upgrade the performance of their Series 80 1911.

Who should skip this product? Those who are not comfortable with gunsmithing or lack the necessary tools and knowledge to fit the part properly. Also, those who are perfectly happy with the performance of their existing firing pin stop.

Must-have accessories or modifications? A good set of gunsmithing files, a hammer and punches for disassembly, and possibly an enhanced extractor for further optimized performance.

Conclusion on EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue

The EGW Oversized Firing Pin Stop Series 80 9/38/40/10 Blue is a worthwhile investment for 1911 owners seeking to improve ejection consistency and overall reliability. While it requires fitting, the benefits in terms of performance and durability are significant. The price of $13.99 is easily justified given the improvement it provides.

I would highly recommend this part to anyone looking to upgrade their Series 80 1911. It’s a simple, effective, and relatively inexpensive way to enhance performance and address a common source of malfunctions. If you’re experiencing erratic ejection, give the EGW Oversized Firing Pin Stop a try. You might be surprised at the difference it makes. Upgrade your 1911 today!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top