First Impressions of Edgar Sherman Design Magwell Ejector For Glock, Gen 5
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 promises enhanced reloading capabilities with a focus on human-centered design. From Edgar Sherman Design, this magwell boasts symmetrical cutouts for easy magazine stripping and angles designed to correct off-angle insertions. After years of running various magwells on my Glocks, I was intrigued by ESD’s approach and eager to see if it lived up to the hype.
I was constantly looking for a magwell that balanced enhanced performance with a sleek, non-obtrusive profile. Many magwells I’ve used felt bulky and didn’t offer any real benefit. The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 seemed to offer a more refined and purposeful design, which is what ultimately drew me in.
Unboxing the magwell, I was immediately impressed by the build quality and the feel of the 6061-T6 aluminum. The anodized finish looked durable and the machining was clean and precise. It felt solid in my hand, but not overly heavy, a definite plus.
Compared to magwells from Magpul and Agency Arms that I’ve used previously, the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 stood out due to its more intentional design. The Agency Arms one offered a similar aesthetic, but came with a much higher price tag. Magpul’s offering was more budget-friendly, but lacked the thoughtful cutouts and precise angles that Edgar Sherman Design was promoting.
My initial impression was definitely excitement. I was eager to get it installed on my Glock 17 Gen 5 and put it through its paces at the range. The attention to detail and the promise of improved reloading speed and efficiency made me optimistic that this would be a worthwhile upgrade.
Real-World Testing: Putting Edgar Sherman Design Magwell Ejector For Glock, Gen 5 to the Test
First Use Experience
I first tested the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 at my local outdoor shooting range. I ran several drills focusing on rapid magazine changes and one-handed reloads in various positions, including prone, kneeling, and standing. The weather was clear and dry, providing optimal conditions for testing.
The magwell noticeably improved my reload speed and consistency. The wide opening made it easier to guide the magazine into the well, even when my hands were sweaty or I wasn’t looking directly at the gun. I did not experience any issues with magazine insertion.
My initial surprise was how naturally the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 integrated with the grip of my Glock. The external angles provided a comfortable shelf for my support hand, which enhanced my grip and control.
Extended Use & Reliability
After several months of consistent use, the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 has held up remarkably well. I’ve put it through countless range sessions and even incorporated it into my everyday carry setup. There are no signs of significant wear and tear on the anodized finish.
The magwell requires minimal maintenance; a quick wipe down with a cloth is usually sufficient. It has proven to be incredibly durable and reliable. I have noticed no loosening of the mounting screw.
Compared to other magwells I’ve used, the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 outperforms them in terms of both ergonomics and functionality. It’s a significant improvement over the basic polymer magwells and provides similar performance to more expensive aluminum options at a competitive price point.
Breaking Down the Features of Edgar Sherman Design Magwell Ejector For Glock, Gen 5
Specifications
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is constructed from 6061-T6 Aluminum, ensuring a lightweight yet robust design. It features an anodized finish for enhanced durability and corrosion resistance. It is designed for Glock double-stack Gen 5 pistols chambered in 9mm and .40, including the Glock 17 and Glock 22.
The magwell weighs in at 3.2 oz, adding minimal bulk to the firearm. This is important because added weight can hinder performance. It is manufactured in the USA, showcasing commitment to domestic production and quality control.
These specifications are crucial because they directly impact the magwell’s performance and overall user experience. The lightweight aluminum construction ensures that it won’t weigh down the gun, while the anodized finish protects against wear and tear. The precise fit for Gen 5 Glocks guarantees optimal functionality and reliable magazine insertion.
Performance & Functionality
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 excels at improving reload speed and consistency. The wide, beveled opening guides magazines into the magwell with ease, even under stress or in low-light conditions. The symmetrical cutouts allow for quick magazine stripping from either side.
The magwell’s strengths lie in its user-friendly design and enhanced ergonomics. However, its compatibility limitations with certain aftermarket magazine extensions can be a weakness. The design is intended to correct magazine alignment upon insertion.
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 exceeded my expectations. It significantly improved my reload speed, and the comfortable grip enhancement was an unexpected bonus. This is a fantastic feature to have.
Design & Ergonomics
The build quality of the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is exceptional. The 6061-T6 aluminum feels incredibly durable, and the anodized finish provides a sleek, professional look. Its weight is well-balanced, and the overall design is both functional and aesthetically pleasing.
The magwell is incredibly user-friendly with minimal learning curve. Installation is straightforward, and the enhanced grip and magazine insertion are intuitive and easy to master. The well designed cuts allow for easy grip on the magazine to strip it out of the gun if required.
Durability & Maintenance
Given its robust aluminum construction and durable anodized finish, the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is built to last. It is designed to withstand the rigors of frequent use and adverse conditions. A quick wipe down with a clean cloth is all that’s needed to keep it in top condition.
The magwell is easy to maintain and requires no special tools or cleaning solutions. It offers long-lasting reliability. It attaches using a single screw and replaces the factory plug.
Accessories and Customization Options
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 comes with all the necessary hardware for mounting, including a screw. No additional accessories are included.
The magwell is compatible with most standard capacity Glock magazines and some aftermarket extensions. However, compatibility issues may arise with larger, competition-style magazine extensions, as noted by some users. A modification to the plug may be required to fit Glock 19 Gen 5’s.
Pros and Cons of Edgar Sherman Design Magwell Ejector For Glock, Gen 5
Pros
- Enhanced Reload Speed: The wide, beveled opening significantly improves magazine insertion speed.
- Ergonomic Grip: The external angles provide a comfortable and secure shelf for the support hand.
- Durable Construction: Made from high-quality 6061-T6 aluminum with a durable anodized finish.
- Easy Installation: Simple and straightforward installation process.
- Symmetrical Cutouts: Allows for ambidextrous magazine stripping.
Cons
- Magazine Compatibility: May not be compatible with all aftermarket magazine extensions without modification.
- Glock 19 Modification: Requires modification to the ESD Magwell plug for full functionality on Glock 19 Gen 5s.
Who Should Buy Edgar Sherman Design Magwell Ejector For Glock, Gen 5?
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is perfect for competitive shooters and tactical operators seeking to improve their reload speed and consistency. It’s also a great upgrade for Glock owners who want to enhance the ergonomics and functionality of their firearm. Any shooting enthusiast can take advantage of the faster reloads.
This product may not be ideal for Glock owners who prioritize using oversized magazine extensions. It’s also not a necessity for casual shooters who aren’t focused on maximizing reload speed. Those unwilling to modify the plug for Glock 19 applications should avoid this product until the updated plug is released.
A must-have accessory is a high-quality set of magazines. Having reliable magazines will ensure optimal performance with the magwell.
Conclusion on Edgar Sherman Design Magwell Ejector For Glock, Gen 5
The Edgar Sherman Design Magwell Ejector For Glock, Gen 5 is a well-designed and thoughtfully executed upgrade for Gen 5 Glock pistols. It delivers on its promise of enhanced reloading capabilities and improved ergonomics. The quality build materials will ensure this product lasts for years.
At $105.00, the price is justified by the quality, performance, and durability of the product. It offers a significant improvement over cheaper polymer options and stands up well against more expensive aluminum magwells. This makes it a great value proposition.
I would definitely recommend the Edgar Sherman Design Magwell Ejector For Glock, Gen 5 to anyone looking to improve the performance of their Gen 5 Glock. If you’re seeking to enhance your reload speed, improve your grip, and add a touch of style to your Glock, this magwell is an excellent choice. Upgrade your Glock today!