Let’s Dive into Ed Brown Products 1911 Perfection Sear
The 1911 platform, a design classic, hinges on precision. The trigger pull, that crisp break that separates a good shot from a great one, is largely determined by the sear. Enter the Ed Brown Products 1911 Perfection Sear, promising a superior trigger pull with minimal gunsmithing.
I’d been chasing that elusive “glass rod” trigger break on my custom 1911 build. The factory sear was acceptable, but lacked that refined feel. I needed a sear that could deliver consistent performance and a clean, crisp break without extensive tuning.
My first impression of the Ed Brown Products 1911 Perfection Sear was positive. It looked meticulously machined, and the blued finish was flawless. The advertised “perfect fit” with Ed Brown hammers piqued my interest.
I considered Wilson Combat and Cylinder & Slide sears. However, the Ed Brown sear promised minimal hand labor and a prepped hammer contact angle, which appealed to my desire for a less involved installation. I was hopeful this sear would deliver a noticeable improvement in trigger feel.
Real-World Testing: Putting Ed Brown Products 1911 Perfection Sear to the Test
First Use Experience
The sear was installed in my 1911 and tested primarily at an outdoor shooting range. Initial tests were performed with various ammunition types. Conditions varied from sunny and dry to overcast with a slight drizzle, mimicking real-world scenarios.
The difference was immediately apparent. The Ed Brown Products 1911 Perfection Sear, paired with an Ed Brown hammer, delivered a noticeably cleaner and lighter trigger pull. There was a very slight creep before a crisp, predictable break.
I experienced one minor issue initially. The grip safety needed slight adjustment after installation to ensure proper engagement with the sear. However, this was a quick fix.
Extended Use & Reliability
After several months and hundreds of rounds, the Ed Brown Products 1911 Perfection Sear has held up remarkably well. The trigger pull remains consistent and reliable. There are no signs of wear or degradation in performance.
Maintenance is straightforward. Regular cleaning and lubrication, as with any 1911 component, is sufficient. The Ed Brown sear has exceeded my expectations in terms of reliability and consistent performance.
Previously, I had used a sear that required frequent adjustments to maintain a consistent trigger pull. The Ed Brown Products 1911 Perfection Sear outperforms that previous experience significantly. The “set it and forget it” nature of this sear is a major plus.
Breaking Down the Features of Ed Brown Products 1911 Perfection Sear
Specifications
The Ed Brown Products 1911 Perfection Sear is computer designed and fully machined. It is crafted from top quality 4340 tool steel. Heat treated to 50 Rc for exceptional durability, it is designed for a perfect profile.
4340 Tool Steel ensures exceptional strength and resistance to wear. Heat Treatment to 50 Rc provides the necessary hardness for reliable and long-lasting performance. The blue finish adds a touch of refinement and corrosion resistance.
Performance & Functionality
The Ed Brown Products 1911 Perfection Sear drastically improves the trigger pull of a 1911. This is achieved by providing a consistent and predictable sear engagement. This translates to improved accuracy and a more enjoyable shooting experience.
The sear’s prepped hammer contact angle is a major strength. This reduces the amount of fitting required. A minor weakness is the potential need for grip safety adjustment after installation. The Ed Brown Products 1911 Perfection Sear meets expectations by delivering a noticeably improved trigger pull.
Design & Ergonomics
The Ed Brown Products 1911 Perfection Sear showcases excellent build quality. The materials are top-notch and the machining is precise. Its weight is negligible, and it does not impact the overall balance of the firearm.
It is relatively user-friendly, requiring only basic 1911 armorer skills for installation. A novice might require some guidance from a more experienced user.
Durability & Maintenance
Given its high-quality materials and heat treatment, the Ed Brown Products 1911 Perfection Sear should last for many years. Regular cleaning and lubrication are the only maintenance required.
Replacement is not typically necessary under normal usage conditions. However, if damaged, it can be easily replaced with a new Ed Brown Products 1911 Perfection Sear.
Accessories and Customization Options
The Ed Brown Products 1911 Perfection Sear itself does not come with any accessories. It is designed to work seamlessly with other 1911 components.
While not an “accessory”, pairing it with an Ed Brown hammer (#896 or #897) is highly recommended. It’s compatible with most standard 1911 grip safeties, although some minor fitting might be necessary.
Pros and Cons of Ed Brown Products 1911 Perfection Sear
Pros
- Noticeably Improved Trigger Pull: Delivers a cleaner, crisper, and lighter trigger pull for enhanced accuracy and shooting enjoyment.
- High-Quality Materials and Construction: Made from durable 4340 tool steel with precise machining for long-lasting performance.
- Prepped Hammer Contact Angle: Reduces the amount of gunsmithing required for installation, saving time and effort.
- Consistent and Reliable Performance: Maintains a consistent trigger pull over extended use, ensuring predictable results.
- Relatively Easy Installation: Requires only basic 1911 armorer skills, making it accessible to many users.
Cons
- Grip Safety Adjustment: Some fitting of the grip safety may be required after installation.
- Price: While reasonable, it’s slightly more expensive than some other basic sears on the market.
Who Should Buy Ed Brown Products 1911 Perfection Sear?
Perfect for: 1911 enthusiasts, competitive shooters, and anyone looking to improve the trigger pull of their 1911. It’s ideal for those who value quality and reliability and appreciate a crisp, clean trigger break.
Who should skip this product? Individuals completely new to 1911 platforms and are not comfortable with performing basic gunsmithing tasks.
Must-have accessories or modifications? An Ed Brown hammer (#896 or #897) is highly recommended for optimal performance. A quality trigger and sear spring can further enhance the trigger pull.
Conclusion on Ed Brown Products 1911 Perfection Sear
The Ed Brown Products 1911 Perfection Sear is a worthwhile upgrade for any 1911 owner seeking a superior trigger pull. The promise of reduced hand labor is not hyperbole. The sear delivers on its claims of improved trigger feel and consistent performance.
At $32.95, the price is justified by the quality of materials, precision machining, and noticeable improvement in trigger performance. This is a well-made product that enhances the shooting experience.
I wholeheartedly recommend the Ed Brown Products 1911 Perfection Sear to anyone looking to elevate their 1911 trigger. Upgrade today and experience the difference a quality sear can make!