CVA Durasight Dead-On Low One Piece Base/Rings Mount Set Review

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set Made a Bold First Impression

As an outdoor and tactical gear specialist with over a decade of experience, I’ve seen my fair share of scope mounting systems. But when I first laid eyes on the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set, I was intrigued by its seemingly simple yet robust design. The promise of a solid, low-profile mounting solution for my CVA muzzleloader immediately piqued my interest.

My old two-piece scope mount on my CVA Accura MR-X was constantly loosening after heavy recoil. This resulted in frustrating shifts in my point of impact, making precise shots at longer ranges almost impossible. I needed a reliable, one-piece solution to eliminate movement and maintain zero.

Upon unboxing the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set, the first thing I noticed was the solid, machined construction. The black finish was even and clean, and the overall weight felt reassuringly substantial without being overly bulky. My initial impression was positive – this looked like a quality piece of kit.

Compared to separate base and rings, the one-piece design offered a significant advantage in terms of rigidity. I considered other options, such as the Leupold QRW2 scope mount, but I wanted something specifically designed for my CVA rifle. The CVA Durasight seemed like the perfect fit for a dedicated muzzleloader setup.

My first impression was one of cautious optimism. While the build quality seemed excellent, the true test would be how well it performed under the punishing recoil of my muzzleloader. I was eager to get to the range and see if the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set could live up to its promise.

Real-World Testing: Putting CVA Durasight Dead-On Low One Piece Base/Rings Mount Set to the Test

First Use Experience

My first experience with the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set was at my local shooting range, zeroing my CVA Accura MR-X. I used 100-grain equivalent of Blackhorn 209 powder and a 250-grain PowerBelt bullet, a load known for generating significant recoil. The mounting process was straightforward, and the included instructions were clear and concise.

The range was dry and sunny, providing ideal conditions for sighting in my scope. Right away, I noticed a significant improvement in the stability of my scope. After the first few shots, I checked the screws on the mount and rings. They remained tight, suggesting a good, secure fit.

The only initial concern was the low-profile design. With larger diameter scopes, it might cause clearance issues with the hammer on some CVA models. Thankfully, my Leupold VX-Freedom 3-9x40mm scope had ample clearance.

Extended Use & Reliability

After several weeks of regular shooting, including a rigorous practice session before deer season, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set continues to impress. There are no signs of loosening or shifting, and my zero remains consistent. This is a major improvement over my previous two-piece mount.

The black finish has proven to be surprisingly durable, with no scratches or wear marks despite being exposed to the elements. Maintenance is simple. A quick wipe down with a clean cloth after each shooting session keeps the mount in good condition.

Compared to my previous experiences with other budget-friendly scope mounts, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set has exceeded my expectations. It offers a level of stability and reliability typically found in more expensive options. This mount provides confidence in the field, knowing my scope is securely mounted.

Breaking Down the Features of CVA Durasight Dead-On Low One Piece Base/Rings Mount Set

Specifications

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is designed specifically for CVA muzzleloaders manufactured in 2010 or later. It features a one-piece construction, integrating the base and rings for increased rigidity. This ensures a more stable platform for your scope.

The mount is finished in a low-glare black to prevent spooking game. It has a low-profile design to keep the scope close to the bore axis. This enhances accuracy and reduces parallax. This specific model is designed for ALL CVA 2010+ guns, offering a universal fit within that range.

Performance & Functionality

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set excels in providing a rock-solid mounting platform for your scope. Its one-piece design eliminates a common source of movement and instability found in two-piece mounts. This results in improved accuracy and consistency, especially at longer ranges.

The main strength is its simplicity and effectiveness. However, the low-profile design may not be suitable for scopes with large objective lenses.

Overall, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set meets and even exceeds expectations for a budget-friendly scope mount. It provides the stability and reliability needed for accurate muzzleloader shooting.

Design & Ergonomics

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set features a sleek, minimalist design. The all-black finish blends seamlessly with most rifles and scopes. Its one-piece construction contributes to a streamlined profile.

The mount is relatively lightweight, adding minimal bulk to the rifle. Installation is straightforward, requiring only basic tools and a few minutes of time.

Durability & Maintenance

Constructed from durable materials, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is built to withstand the rigors of regular use. The black finish provides corrosion resistance, protecting the mount from the elements. Regular cleaning and tightening of the screws will ensure long-lasting performance.

With proper care, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set should provide years of reliable service. This represents excellent value for the price.

Accessories and Customization Options

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set comes ready to install. No additional accessories are required.

The mount accepts standard 1-inch scope tubes. While it doesn’t offer much in terms of customization options, its primary function is to provide a secure and stable mounting platform for your scope. Its compatibility with a wide range of 1-inch scopes makes it a versatile choice.

Pros and Cons of CVA Durasight Dead-On Low One Piece Base/Rings Mount Set

Check Best Price HERE

Who Should Buy CVA Durasight Dead-On Low One Piece Base/Rings Mount Set?

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is perfect for CVA muzzleloader owners (2010 models or newer) seeking a reliable and affordable scope mounting solution. It’s ideal for hunters who demand accuracy and consistency in the field, and for recreational shooters looking to improve their performance at the range. It is a great solution for those tired of constantly tightening a two-piece mount.

Those with scopes that have very large objective lenses might need to skip this product due to its low-profile design. Someone who requires adjustable height rings should also avoid this fixed-height, one-piece model.

A must-have accessory is a good set of scope mounting tools, including a torque wrench to ensure proper screw tightening. Consider high-quality scope rings if you require something other than the included 1-inch rings, although this would negate the purpose of buying an all-in-one product like this.

Conclusion on CVA Durasight Dead-On Low One Piece Base/Rings Mount Set

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is an excellent choice for CVA muzzleloader owners seeking a simple, reliable, and affordable scope mounting solution. Its one-piece design provides exceptional stability, improving accuracy and consistency in the field. The build quality is impressive for the price, and installation is straightforward.

At $25.99, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is an absolute steal. It offers performance comparable to much more expensive options, making it an outstanding value for the money.

I wholeheartedly recommend the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set to any CVA muzzleloader owner looking to upgrade their scope mounting system. Don’t let a flimsy mount ruin your shot – invest in the CVA Durasight and experience the difference a solid, reliable mounting platform can make. Upgrade your CVA today and take your shooting to the next level!

Check Best Price HERE