Let’s Talk About Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga.
Shotguns are my go-to for home defense and the occasional turkey hunt, and I’m always looking for ways to improve their reliability and capacity. The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. caught my eye as a potential upgrade to ensure consistent feeding in my modified 20-gauge. Choate Tool promises enhanced performance, and at a price point that barely registers, it seemed worth exploring.
For years, I’ve wrestled with factory springs that seemed to lose their punch after extended use, especially when coupled with magazine extensions. This often manifested as failure-to-feed issues at inopportune times – a problem I was determined to solve once and for all.
My initial assessment was a bit underwhelming; it’s just a spring, after all. The design appeared standard, but the build quality seemed solid enough for such an inexpensive part.
I had considered other aftermarket springs from brands like Wolff and TacStar, but their higher price points made me hesitant for a simple spring replacement. Ultimately, the affordability of the Choate Tool option, combined with Choate Tool’s reputation, swayed my decision.
My first impression was cautiously optimistic. For less than a cup of coffee, I was intrigued to see if this little spring could deliver on its promise of improved reliability.
Real-World Testing: Putting Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. to the Test
First Use Experience
My first test took place at my local gun range, where I put the spring through its paces with a variety of 20-gauge loads. I loaded up my extended magazine tube with everything from birdshot to buckshot, simulating different scenarios. The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. was installed in my Mossberg 500 20 ga with a 9-shot extension.
The weather was a typical humid day here in Georgia. I wanted to see how the new spring handled after getting hot from repetitive firing. I wanted to simulate a tactical scenario so I loaded and unloaded the tube repeatedly during rapid fire drills.
Installation was straightforward, and I didn’t need any specialized tools. The spring slid right into place after I disassembled my magazine tube.
After the initial installation, I didn’t experience any immediate feeding issues. The spring seemed to provide consistent pressure, and the rounds chambered smoothly.
Extended Use & Reliability
After several months of regular use, the Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. has held up surprisingly well. I’ve run hundreds of rounds through it, and I’ve yet to experience a single failure to feed.
There is no signs of wear and tear despite the amount of usage. However, I make it a point to clean my shotgun after every range visit so I haven’t noticed any rust.
Maintenance is easy; I simply wipe it down with a lightly oiled cloth during my regular gun cleaning routine. It’s been faring better than the factory spring, which showed signs of fatigue much earlier.
Compared to my previous experience with stock springs, the Choate Tool spring is a clear upgrade. It provides more consistent feeding and gives me greater confidence in my shotgun’s reliability.
Breaking Down the Features of Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga.
Specifications
The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. is specifically designed for 20-gauge shotguns with 9 or 10-shot magazine extensions. It’s manufactured in the USA by Choate Tool, ensuring a certain level of quality control.
The spring is designed for 20 gauge shotguns and provides enough force to reliably feed ammunition in extended magazine tubes holding 9 or 10 rounds. The country of origin, being the USA, often implies adherence to higher manufacturing standards. This detail matters because a reliable spring is essential for consistent feeding, especially in high-capacity configurations.
Performance & Functionality
The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. significantly improves feeding reliability in my extended magazine tube. It provides consistent pressure on the shells, ensuring they chamber smoothly and without hesitation.
The spring’s strength is a definite plus, ensuring reliable feeding even with a fully loaded extended magazine. However, the extra strength could make the last round or two slightly harder to load. Overall, it exceeds my expectations, especially considering its low price point.
Design & Ergonomics
The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. is a no-frills design. The materials used feel durable, and it appears to be well-made, especially given its price.
Installing the spring is straightforward, and it doesn’t require any specialized tools or gunsmithing skills. There’s virtually no learning curve; it’s a simple drop-in replacement.
Durability & Maintenance
Given its construction, the Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. should last for a reasonable amount of time. Regular cleaning and light lubrication will help prolong its lifespan and maintain its performance.
The spring requires minimal maintenance. Regular cleaning and a light coat of oil are all that’s needed to keep it in good working condition.
Accessories and Customization Options
Since the Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. is a spring, there are no real accessories that come with it. However, it’s a vital component when using magazine extensions from Choate Tool or other brands.
It seamlessly integrates with most standard 20-gauge magazine extensions, offering a degree of compatibility. It’s specifically designed to work with the Choate Tool extension, but should also work with most aftermarket options.
Pros and Cons of Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga.
Pros
- Reliable feeding with extended magazine tubes. This ensures smooth cycling and reduces the risk of malfunctions during critical situations.
- Inexpensive. The low price point makes it an accessible upgrade for any 20-gauge shotgun owner.
- Easy installation. A drop-in replacement, requiring no specialized tools or gunsmithing.
- Durable construction. Designed to withstand repeated use and maintain its spring tension over time.
- Improved performance over factory springs. Provides more consistent and reliable feeding compared to stock springs.
Cons
- Slightly stiffer than factory springs, potentially making the last few rounds harder to load.
- May require occasional replacement depending on usage and storage conditions.
Who Should Buy Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga.?
The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. is perfect for shotgun owners who have installed magazine extensions and want to ensure reliable feeding. It’s also a great option for those who simply want to upgrade their factory spring for improved performance and reliability.
This product is not necessary for those who use their shotguns with a standard capacity magazine tube. Also, if you are having feeding issues it may not be the spring, but the ammunition being used.
A must-have accessory is a good quality magazine extension. It is also a good idea to have snap-caps to use in testing the spring’s feeding ability.
Conclusion on Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga.
The Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. is a simple yet effective upgrade that significantly improves the reliability of 20-gauge shotguns with extended magazine tubes. For a few dollars, it provides consistent feeding and peace of mind.
The price is absolutely justified. Given its performance and durability, it’s a worthwhile investment for any shotgun owner who relies on their firearm for home defense or sport.
I would definitely recommend the Choate Tool 9&10 Shot Magazine Extension Spring for 20 Ga. to anyone looking to enhance the reliability of their 20-gauge shotgun. It is a must-have for extended magazine tubes. Upgrade your shotgun today, you wont regret it!