CARL WATERFOWL CHOKE SET MOSS 835/935 12GA Review

The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA Made a Bold First Impression

As an avid waterfowl hunter with over a decade spent perfecting my shot, I’ve learned that consistent patterns are paramount to success. I was persistently frustrated with the inconsistent spread I was getting from my factory chokes on my trusty Mossberg 835. I needed a solution that would tighten my patterns and give me the confidence to take those longer shots on wary birds.

That’s what led me to the CARL WATERFOWL CHOKE SET MOSS 835/935 12GA, promising tighter, denser patterns. After researching numerous aftermarket choke options, the CARL set stood out due to its claims of a longer parallel section designed for pattern consistency. It also had laser markings for easy identification. Upon unboxing, the chokes exuded quality. The stainless-steel construction felt robust, and the knurled ends gave a tactile sense of reliability.

I had considered the Patternmaster Code Black Duck and the Briley Spectrum chokes, both well-regarded in the waterfowl community. Ultimately, I opted for the CARL set because of its appealing price point and specific design for the Mossberg 835/935 platform. I was cautiously optimistic. The build quality and the promised improvements to my patterns generated genuine excitement.

Real-World Testing: Putting CARL WATERFOWL CHOKE SET MOSS 835/935 12GA to the Test

First Use Experience

My first field test was on a frigid December morning in the flooded timber of Arkansas. The CARL chokes were subjected to some demanding conditions. The air was thick with moisture, and the temperature hovered just above freezing. Installing the chokes was straightforward. The knurled ends provided a secure grip, even with gloved hands.

I started with the modified choke. It immediately showed a noticeable improvement over my factory choke. The pattern was significantly tighter at 30 yards, with fewer holes and a more consistent spread. The improved pattern instilled confidence for longer shots. There were no malfunctions or issues during the initial hunt.

Extended Use & Reliability

After a full season of hard use – enduring mud, rain, and countless shots – the CARL WATERFOWL CHOKE SET MOSS 835/935 12GA has held up remarkably well. There is no sign of corrosion or wear on the stainless-steel finish. Cleaning is simple. A quick scrub with a bore brush and solvent keeps them in top condition.

Compared to my previous experiences with factory chokes, the CARL chokes have been a revelation. They have given me a tighter and more reliable pattern that has noticeably improved my success rate in the field. The performance has genuinely exceeded my expectations. This is especially true when using steel shot, which tends to pattern less consistently than lead.

Breaking Down the Features of CARL WATERFOWL CHOKE SET MOSS 835/935 12GA

Specifications

  • The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA is designed for 12-gauge Mossberg 835 and 935 shotguns. This ensures a proper fit and optimal performance within these specific shotgun models.
  • They are constructed from 17-04 stainless steel. This provides exceptional durability and resistance to corrosion, vital for withstanding harsh hunting environments.
  • The chokes feature an extended design. This extends beyond the end of the barrel for easy removal and identification.
  • Each choke has a 25% longer parallel section. This supposedly enhances pattern consistency by gradually constricting the shot.
  • The chokes are laser marked with constriction and size. This allows for easy identification and selection in the field.

Performance & Functionality

The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA performs admirably. The tighter patterns at longer ranges deliver more consistent pellet strikes on target. The chokes have noticeably improved my effective range, providing greater confidence in taking ethical shots.

One minor weakness is the lack of documentation regarding specific constriction measurements for each choke. It would be helpful to have precise data to further fine-tune my ammunition selection. Overall, the chokes meet and even exceed my expectations for pattern density and consistency.

Design & Ergonomics

The stainless-steel construction imparts a feeling of robustness. The knurled ends offer a secure grip, even with gloved or wet hands. The extended design makes swapping chokes quick and easy in the field.

There is no learning curve associated with using these chokes. Installation and removal are simple, and the laser markings eliminate any guesswork. The user-friendly design makes them a valuable addition to any waterfowl hunter’s gear.

Durability & Maintenance

The 17-04 stainless steel construction promises years of reliable service. After a season of heavy use, the chokes show no signs of rust or corrosion. Regular cleaning with a bore brush and solvent is all that is needed to keep them in optimal condition.

The durability and easy maintenance of the CARL WATERFOWL CHOKE SET MOSS 835/935 12GA make them a worthwhile investment. These chokes are built to withstand the rigors of waterfowl hunting and should provide reliable performance for many seasons.

Accessories and Customization Options

The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA does not come with any specific accessories. However, these chokes are compatible with most standard choke wrenches designed for extended chokes. This ensures ease of installation and removal using readily available tools. There are no inherent customization options for the chokes themselves.

Pros and Cons of CARL WATERFOWL CHOKE SET MOSS 835/935 12GA

Pros

  • Noticeably tighter and denser patterns compared to factory chokes.
  • Durable 17-04 stainless steel construction for corrosion resistance.
  • Extended design with knurled ends for easy removal and installation, even with gloves.
  • Laser-marked constrictions for quick and easy identification.
  • Improved effective range for more ethical and successful hunts.

Cons

  • Lack of specific constriction measurements in documentation.
  • Limited customization options beyond choke selection.


Who Should Buy CARL WATERFOWL CHOKE SET MOSS 835/935 12GA?

The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA is perfect for waterfowl hunters using Mossberg 835 or 935 shotguns who are seeking improved pattern density and consistency. This is especially beneficial for those who frequently hunt wary birds or need to take longer shots. It is also a good choice for hunters who want a durable and reliable choke system that can withstand harsh hunting conditions.

Hunters who primarily hunt over decoys at close range may not see as much benefit from these tighter patterns and should possibly look at spreader chokes instead. Someone seeking extensive customization options or very precise constriction data may want to explore higher-end choke systems.

Conclusion on CARL WATERFOWL CHOKE SET MOSS 835/935 12GA

The CARL WATERFOWL CHOKE SET MOSS 835/935 12GA has proven to be a valuable addition to my waterfowl hunting arsenal. The improved pattern density and consistency have noticeably increased my success in the field. The durable stainless-steel construction ensures long-lasting reliability.

At $106.99, the price is certainly justified. The performance benefits and durability make it a sound investment for any serious waterfowl hunter using a Mossberg 835 or 935. I wholeheartedly recommend the CARL WATERFOWL CHOKE SET MOSS 835/935 12GA. If you’re looking to tighten your patterns and improve your success in the field, this choke set is a must-have. Don’t hesitate – upgrade your shotgun today and experience the difference!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top