Boss Buck Gravity Head 3 Way Feeder Review

Let’s Dive into Boss Buck Gravity Head 3 Way Feeder

The Boss Buck Gravity Head 3 Way Feeder promises a moisture-resistant, free-choice feeding system designed to accommodate even the largest whitetail. Offered by Boss Buck, this gravity feeder head features ten ports with optimized openings, internal cone for even feed distribution, and adjustable feed flow, all at an attractive price point of $96.99. I’ve spent over a decade in the outdoor gear industry, and the Boss Buck Gravity Head 3 Way Feeder caught my attention because I was searching for a robust and reliable protein feeder system that wouldn’t require constant maintenance or be easily compromised by weather.

I was tired of the constant issues with electronic feeders; the batteries dying at the worst times, the motors malfunctioning, and the general unreliability in harsh weather conditions. The promise of a simple, gravity-fed system was extremely appealing. Unboxing the Boss Buck Gravity Head 3 Way Feeder, my initial impression was of solid, well-molded plastic. The unit felt sturdy and the design seemed practical.

Compared to other gravity feeders I’ve used in the past – a cheaper, generic model and a more expensive spin-cast converted to gravity flow – the Boss Buck Gravity Head 3 Way Feeder immediately stood out with its seemingly superior port design and adjustability. The cheaper model lacked any flow control and wasted a ton of feed, while the converted spin-cast was always clogging. I chose the Boss Buck Gravity Head 3 Way Feeder hoping for a system that would effectively dispense feed with minimal waste and require less of my attention. I was cautiously optimistic, hoping it would live up to the claims of moisture resistance and even feed distribution.

Check Best Price HERE

Real-World Testing: Putting Boss Buck Gravity Head 3 Way Feeder to the Test

First Use Experience

I installed the Boss Buck Gravity Head 3 Way Feeder on a 55-gallon drum at my hunting lease in Central Texas. The area is known for its fluctuating weather, from scorching summer heat to sudden downpours. I filled the feeder with a high-protein deer pellet mix and set the adjustable sleeve to a mid-range setting. The deer took to the feeder almost immediately, and it was encouraging to see them accessing the feed without difficulty.

The first real test came with a heavy rainstorm a few days later. I was anxious to see if the claimed moisture resistance held up. To my relief, the feed ports remained relatively dry, and the drain holes seemed to effectively disperse any water that managed to enter. Some minor clumping of feed occurred in one port, but it was significantly less than I had experienced with other feeders.

Extended Use & Reliability

After three months of use, the Boss Buck Gravity Head 3 Way Feeder has proven to be a reliable and low-maintenance system. There are minimal signs of wear and tear despite constant use by deer and exposure to the elements. The plastic hasn’t faded or cracked.

Cleaning is simple; a quick brush and occasional wipe-down are all that’s needed. Compared to my previous experiences with electronic feeders that required frequent repairs and battery replacements, the Boss Buck Gravity Head 3 Way Feeder has been a breath of fresh air. It requires minimal intervention, allowing me to focus on other aspects of habitat management.

Breaking Down the Features of Boss Buck Gravity Head 3 Way Feeder

Specifications

• The Boss Buck Gravity Head 3 Way Feeder features ten ports designed with a 10-degree angle. This angle is intended to provide easy access for deer of various sizes.
• Each feed port has a 1-inch overhang. This overhang is designed to protect the feed from rain and dew, helping to prevent spoilage.
• The feed ports are 10 inches long and have a 4-inch I.D. (Inner Diameter). These dimensions are sized to accommodate the muzzles of larger whitetail bucks.
• Each port incorporates a drain hole. This is a crucial feature for dispersing water that may enter the port, further enhancing moisture resistance.
• An internal cone design evenly distributes feed to the three ports. This ensures consistent feed flow and prevents any single port from being overloaded.
• An adjustable inner sleeve provides control over feed flow. This allows users to fine-tune the amount of feed dispensed, catering to different types of feed and varying consumption rates.

These specifications contribute directly to the feeder’s performance by ensuring accessibility for deer, minimizing feed waste, maximizing weather resistance, and providing flexibility in feed management.

Performance & Functionality

The Boss Buck Gravity Head 3 Way Feeder performs its primary job of dispensing feed effectively and reliably. The deer have consistently accessed the feed without any issues, and the adjustable flow control allows me to manage the feed rate according to consumption and prevent excessive waste.

One minor weakness is that, with very fine, powdery feed, some sifting can occur, potentially leading to a small amount of waste. The feeder meets and mostly exceeds my expectations for a gravity-fed system.

Design & Ergonomics

The build quality is solid, with the feeder head constructed from durable, UV-resistant plastic. The weight is manageable, making it easy to install and handle. The feeder head is relatively user-friendly. Adjusting the feed flow is straightforward, requiring no special tools.

Durability & Maintenance

Based on my experience so far, the Boss Buck Gravity Head 3 Way Feeder appears to be built to last. Regular cleaning is simple and should extend its lifespan considerably. The construction suggests it will withstand years of use in harsh outdoor conditions.

Accessories and Customization Options

The Boss Buck Gravity Head 3 Way Feeder does not come with any specific accessories. However, it is designed to be compatible with standard 55-gallon drums or similar containers. The feeder head can be easily attached to a suitable container, allowing users to customize the overall feeder setup to their specific needs and preferences. While it doesn’t have customization in the sense of adding “optics” or similar items, its inherent adjustability and compatibility with various container sizes makes it inherently customizable.

Pros and Cons of Boss Buck Gravity Head 3 Way Feeder

Check Best Price HERE

Who Should Buy Boss Buck Gravity Head 3 Way Feeder?

The Boss Buck Gravity Head 3 Way Feeder is perfect for hunters, landowners, and wildlife enthusiasts looking for a reliable, low-maintenance, and cost-effective way to provide supplemental feed to deer and other wildlife. It’s particularly well-suited for those in areas with fluctuating weather conditions where moisture control is crucial.

Those who need a bear-resistant feeder or who require extremely precise feed dispensing should probably skip this product. A must-have accessory is a sturdy, weather-resistant 55-gallon drum or similar container to mount the feeder head onto.

Conclusion on Boss Buck Gravity Head 3 Way Feeder

The Boss Buck Gravity Head 3 Way Feeder has proven to be a valuable addition to my wildlife management efforts. The moisture resistance, adjustable feed flow, and durable construction make it a standout product in its category. At $96.99, the price is certainly justified by the performance and convenience it offers.

I would definitely recommend the Boss Buck Gravity Head 3 Way Feeder to anyone seeking a dependable and affordable gravity-fed system. If you’re tired of the headaches associated with electronic feeders and want a simple, effective solution, give the Boss Buck Gravity Head 3 Way Feeder a try; you won’t be disappointed.