BERRYS 15315 PREFERRED BULLET PULLER Review

Let’s Talk About BERRYS 15315 PREFERRED BULLET PULLER

As reloaders, we all know that mistakes happen. A squib load, an overcharge, a bullet seated too deep – these are realities that can halt a range session faster than you can say “malfunction.” That’s where the BERRYS 15315 PREFERRED BULLET PULLER comes in. It’s a hammer-style bullet puller designed to safely and effectively disassemble your handloads, salvaging those valuable components.

I needed a reliable way to disassemble mistakes. A progressive press is amazing, but occasionally, a round gets messed up. I needed a low-cost way to fix that, but without damaging the bullet or case if possible.

Upon unboxing, my initial thoughts were that it’s a straightforward, no-frills tool. The rubberized grip felt comfortable in hand, and the inclusion of multiple collets was a definite plus. The overall build quality seemed decent for the price point, though I immediately wondered about the longevity of the collets themselves.

I considered a collet-style puller that mounts to my reloading press. However, the BERRYS 15315 PREFERRED BULLET PULLER won out due to its simplicity and portability. I also looked at a kinetic bullet puller from RCBS. In the end, the lower price of the Berry’s made it the best starting point to save money.

My first impression was cautiously optimistic. It seemed like a practical tool for occasional use, but I was eager to see how it would perform under actual reloading conditions and if it really would pay for itself.

Check Best Price HERE

Real-World Testing: Putting BERRYS 15315 PREFERRED BULLET PULLER to the Test

First Use Experience

I first tested the BERRYS 15315 PREFERRED BULLET PULLER at my reloading bench, addressing a batch of .223 Remington rounds with improperly seated bullets. The process was simple: select the appropriate collet, insert the cartridge, and firmly strike the puller against a sturdy wooden block. The first few pulls were a bit hesitant, but I quickly found the sweet spot for force, and the bullets came out cleanly, without significant deformation.

I didn’t test it in wet conditions, but the rubber grip gave me confident control during use. The puller was easy to use without any initial learning curve. The only slight issue was that after a dozen rounds, I was wishing I’d worn gloves, so my hands didn’t get sore from smacking the tool on the wood block.

Extended Use & Reliability

After several weeks of consistent use, the BERRYS 15315 PREFERRED BULLET PULLER has proven to be a reliable, though not lightning-fast, tool. There are no signs of significant wear and tear on the handle or collets. I did notice the rubber insert inside the hammer tip is already showing some indentation.

Maintenance is a breeze – simply wipe it down with a clean cloth after use. Compared to other methods I’ve used in the past (like pliers and a vise – definitely not recommended!), this puller offers a much safer and more controlled way to disassemble rounds. It certainly saves components.

Breaking Down the Features of BERRYS 15315 PREFERRED BULLET PULLER

Specifications

• Universal Compatibility: The BERRYS 15315 PREFERRED BULLET PULLER is designed to work with a wide range of centerfire calibers, from .22 to .45 (excluding .25 ACP). This is thanks to the included set of four collets, each tailored to specific cartridge sizes.
• Rubberized Grip: The hammer-style puller features a comfortable, rubberized grip. This reduces hand fatigue during extended use.
• Rubber Inserted Tip: A rubber insert inside the hammer tip is gentle on bullets. This prevents damage during extraction.
• Collet Sizes: Includes collets for: Black (X-Small) .25 ACP and Small Rifle Calibers; Blue (Small) – .32 – .380 and 17 Rem – 223 Rem; Green (Large) – 9mm – 10mm and 6mm – 8mm; Red (X-Large) – .41 – .45 ACP and Belted Mags – 45-70. The wide range of sizes ensures compatibility with many cartridges.

These specifications matter because they directly impact the tool’s versatility and ease of use. The wide caliber compatibility saves you from needing multiple pullers, while the ergonomic grip ensures comfort during longer reloading sessions. The rubber insert shows care was taken to prevent damaging the bullets.

Performance & Functionality

The BERRYS 15315 PREFERRED BULLET PULLER does its job effectively, extracting bullets without excessive force or damage. While not as fast as a collet-style press-mounted puller, it is significantly safer and more controlled than other methods. The main weakness is speed – if you need to disassemble hundreds of rounds, this can become tedious.

It meets expectations for occasional use and offers good value for the price.

Design & Ergonomics

The build quality is decent, with a sturdy plastic handle and durable collets. The rubber grip provides a comfortable and secure hold, even with sweaty hands. The design is simple and intuitive.

There is no significant learning curve.

Durability & Maintenance

With proper care, the BERRYS 15315 PREFERRED BULLET PULLER should last for years of occasional use. Maintenance is minimal – simply wipe down the puller and collets after each use. Collets are subject to wear and tear but should hold up well under normal use.

Accessories and Customization Options

The BERRYS 15315 PREFERRED BULLET PULLER comes with four collets, covering a wide range of calibers. There aren’t really any “accessories” for this type of tool. Some reloaders might choose to add a dedicated wooden block to their bench for consistent impact, but that’s more of a personal preference.

I’ve not found any aftermarket collets specifically designed for this model, but with some research, it may be possible to find compatible sizes from other manufacturers.

Pros and Cons of BERRYS 15315 PREFERRED BULLET PULLER

Check Best Price HERE

Who Should Buy BERRYS 15315 PREFERRED BULLET PULLER?

The BERRYS 15315 PREFERRED BULLET PULLER is perfect for reloaders who are just starting out, or for those who only need to disassemble a small number of rounds occasionally. It’s also a great option for reloaders who want a portable and inexpensive tool for their range bag. It’s ideal for fixing the inevitable occasional mistakes that come with handloading.

Those who need to disassemble large quantities of ammunition regularly should consider investing in a collet-style puller that mounts to their reloading press. For the serious high-volume reloader, the manual labor of this tool could become frustrating.

A dedicated wooden block is a must-have accessory for consistent and effective use.

Conclusion on BERRYS 15315 PREFERRED BULLET PULLER

The BERRYS 15315 PREFERRED BULLET PULLER is a simple, affordable, and effective tool for disassembling handloads. While it may not be the fastest option on the market, it offers a safe and controlled way to salvage valuable components. It is a great option for novice reloaders and those who only need to pull bullets occasionally.

The price is definitely justified, considering the value it provides in terms of component salvage and safety.

I would recommend the BERRYS 15315 PREFERRED BULLET PULLER to any reloader looking for a budget-friendly and reliable way to disassemble their ammunition. Don’t let reloading mistakes cost you money – invest in the BERRYS 15315 PREFERRED BULLET PULLER today!