Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. Review

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. Made a Bold First Impression

As a seasoned outdoorsman with over a decade immersed in the world of tactical and hunting gear, I’ve seen countless broadheads come and go. When Bear Archery announced the re-introduction of the iconic Razorhead, but with a modern, weight-adjustable twist, my interest was immediately piqued. The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. promised a return to a trusted design with the added versatility to tailor the broadhead’s weight to my specific bow setup and hunting needs – a claim I was eager to investigate.

For years, I’ve struggled to find a broadhead that offered both the legendary cutting power of a single bevel and the ability to fine-tune the weight without resorting to cumbersome add-ons. The variable weight system seemed like the perfect solution. The promise of easily switching between 150, 175, 200, and 250 grains was incredibly appealing.

Upon receiving the kit, my initial impression was positive. The broadheads themselves felt solid, with a clearly robust stainless-steel construction. The machining was clean, and the single bevel edge looked wickedly sharp. The included inserts – magnesium, aluminum, and stainless steel – were neatly organized.

Compared to fixed-weight single bevel broadheads like the Iron Will Wide or the VPA three-blade, the Bear Razor Head VWS immediately stood out due to its adaptability. While the Iron Will and VPA options are undoubtedly high-quality, they lack the on-the-fly weight adjustability offered by Bear. Against adjustable-weight broadheads like the Ethics Archery system, the Bear Razor Head VWS presents a simpler, more streamlined approach.

My first impression was one of cautious optimism. The design looked promising, but the proof would be in the performance. I was excited to get these broadheads onto my arrows and see how they performed both on the range and in the field.

Real-World Testing: Putting Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. to the Test

First Use Experience

My initial testing took place at my local archery range, followed by some controlled shots into a high-density foam target designed for broadhead use. I started with the bare 150-grain heads to establish a baseline. The flight was surprisingly stable, even without fletching correction.

Next, I experimented with the different weight inserts, moving up to 175, 200, and finally 250 grains. Each change in weight noticeably altered the arrow’s point of impact, as expected. However, the consistency remained impressive once I adjusted my sight accordingly. The single bevel design did induce some slight arrow rotation in flight, a common characteristic of this style of broadhead.

There were no immediate issues. The inserts were easy to install and remove, and the broadheads held their edge well after repeated impacts with the target. I was initially concerned about the durability of the magnesium insert, but it showed no signs of deformation after several shots.

Extended Use & Reliability

After several weeks of consistent practice, the Bear Razor Head VWS continued to impress. I deliberately shot into tougher portions of the target to simulate bone impact, and the broadheads consistently penetrated deep and maintained their structural integrity. There were no signs of tip curling or bending.

The stainless-steel blades showed minimal wear and tear, even after repeated use. I did notice some minor surface scratches, but these were purely cosmetic. The sharpness of the single bevel edge remained remarkably consistent, requiring only occasional stropping to maintain its keenness.

Maintenance was straightforward. A simple cleaning with soap and water followed by a light oiling was all that was required to keep the broadheads in top condition. Compared to some broadheads that require specialized tools for blade replacement or sharpening, the Bear Razor Head VWS was refreshingly simple to maintain. It outperformed my previous experiences with cheaper, less durable broadheads that often required frequent blade changes or outright replacement after a few shots.

Breaking Down the Features of Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk.

Specifications

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. offers a unique set of features designed for adaptability and performance. The broadhead itself weighs 150 grains and serves as the base for the variable weight system. It can be used as a glue-on point for wooden or swedged arrow shafts.

• Material: High-grade stainless steel construction for durability and edge retention.
• Weight System: Variable Weight System (VWS) allows for weight customization via included inserts.
• Weight Options: 150gr, 175gr, 200gr, and 250gr.
• Inserts: Includes magnesium (175gr), aluminum (200gr), and stainless-steel (250gr) inserts.
• Compatibility: Designed to fit both aluminum and carbon arrow shafts.
• Blade Design: Single Bevel for enhanced penetration and bone splitting.
• Includes: Three broadheads, three sets of inserts, and three field points matching the broadhead weight.

These specifications matter because they directly impact the broadhead’s flight characteristics, penetration power, and overall effectiveness on game. The ability to adjust the weight allows archers to fine-tune their arrow flight and optimize their setup for different draw weights and arrow spines. The single bevel design promotes rotation upon impact, which can lead to increased tissue damage and quicker kills.

Performance & Functionality

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. performs admirably in its intended role. Its accuracy is commendable, especially considering the single bevel design, and the penetration is impressive, even at the lower weight settings.

The greatest strength of this broadhead lies in its versatility. The ability to quickly and easily change the weight allows archers to adapt to different hunting scenarios and arrow setups. The single bevel design delivers on its promise of enhanced penetration and bone-splitting capability.

However, the single bevel design might require some tuning and adjustments to arrow flight, particularly for archers unfamiliar with this type of broadhead. It meets and even exceeds expectations, providing a dependable and adaptable broadhead solution.

Design & Ergonomics

The Bear Razor Head VWS boasts a robust and well-thought-out design. The stainless-steel construction feels solid and durable, inspiring confidence in its ability to withstand the rigors of hunting. The weight is well-distributed, even with the various inserts installed.

The broadhead is user-friendly, with a straightforward insert system that requires no specialized tools. There is a slight learning curve associated with tuning single bevel broadheads for optimal arrow flight, but Bear provides ample resources and guidance to assist archers in this process.

Durability & Maintenance

The Bear Razor Head VWS is built to last. The high-grade stainless steel is resistant to corrosion and wear, ensuring a long lifespan even with frequent use.

Maintaining the broadhead is simple and requires minimal effort. Regular cleaning and occasional sharpening are all that is needed to keep it in top condition.

Accessories and Customization Options

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. comes with the necessary accessories to get started. The kit includes three broadheads, three sets of weight inserts (magnesium, aluminum, and stainless steel), and three field points that match the weight of the broadhead.

While there are no specific customization options offered by Bear beyond the weight inserts, the broadhead is compatible with standard arrow inserts and can be used with a variety of arrow shafts from different manufacturers.

Pros and Cons of Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk.

Who Should Buy Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk.?

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. is perfect for experienced bowhunters who appreciate the benefits of a single bevel broadhead and value the ability to fine-tune their arrow weight for optimal performance. It’s also well-suited for those who hunt a variety of game animals and require a broadhead that can be adapted to different hunting scenarios.

Archers new to single bevel broadheads or those who prefer a simpler, fixed-weight system might find the Bear Razor Head VWS a bit challenging to set up initially.

Must-have accessories include a reliable arrow squaring device and a sharp broadhead sharpener to maintain the single bevel edge.

Conclusion on Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk.

The Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. is a well-designed and versatile broadhead that offers a unique combination of traditional single bevel performance and modern weight adjustability. The ability to fine-tune the arrow weight is a game-changer, allowing archers to optimize their setup for different bows, arrow spines, and hunting situations.

At $53.99, the price is justified by the quality of the materials, the innovative design, and the versatility it offers.

I would absolutely recommend the Bear Razor Head VWS to any serious bowhunter looking for a high-performance, adaptable broadhead. Give the Bear Razor Head VWS Single Bevel Broadhead Kit 150-250 gr. 3 pk. a shot – you might just find your new go-to broadhead!