The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 Made a Bold First Impression
As a seasoned tactical gear specialist, I’ve seen countless optic mounts come and go. When I first laid eyes on the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2, I knew Bravo Company Manufacturing (BCM) was serious. This isn’t just another mount; it’s a precisely engineered piece designed to elevate the performance of your Aimpoint Micro T2.
My journey to this mount stemmed from a need for a more robust and reliable optic solution for my AR-15 platform. I was tired of mounts that would loosen over time, shifting my zero and compromising accuracy. I needed something rock-solid and built to withstand the rigors of serious use.
Upon unboxing, the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 impressed me immediately with its clean lines and robust construction. The matte black finish and precisely machined edges screamed quality. It felt substantial in hand, suggesting a durable build.
I considered several alternatives, including mounts from Larue Tactical and Scalarworks. Ultimately, I chose the BCM mount due to its reputation for simplicity, ruggedness, and the lower 1/3 co-witness height that perfectly aligns with my backup iron sights. My initial impression was one of excitement, confident that this mount would solve my optic mounting woes.
Real-World Testing: Putting BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 to the Test
First Use Experience
My initial testing ground for the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 was at my local shooting range. I mounted my Aimpoint Micro T2 and zeroed it at 50 yards. The mount felt incredibly secure, and the optic sat perfectly in place.
I ran several drills, including rapid fire and transitions, to test the mount’s ability to hold zero under recoil. It performed flawlessly, maintaining a consistent point of impact throughout. I even subjected it to some light bumps and knocks to simulate real-world conditions, and it remained steadfast.
The lower 1/3 co-witness provided a clear and unobstructed view of my target while allowing me to use my iron sights as a backup. It took very little time to get used to the height, and I found it to be both comfortable and effective. There were no surprises, only consistent, reliable performance.
Extended Use & Reliability
After several months of regular use, the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 has proven to be an exceptional piece of gear. It has held up flawlessly, showing no signs of loosening or shifting. The finish has remained intact, even after exposure to rain and mud during a recent training exercise.
Maintenance has been minimal, requiring only occasional cleaning with a dry cloth. The mount has exceeded my expectations, providing a level of reliability and performance that I haven’t experienced with other mounts. Compared to my previous experiences, the BCM mount is a clear winner in terms of durability and zero retention.
Breaking Down the Features of BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2
Specifications
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 is specifically designed for the Aimpoint Micro T2 and similar footprint red dot sights. Its key features include a lower 1/3 co-witness height, allowing for seamless integration with standard AR-15 iron sights. The mount is constructed from lightweight but durable 6061-T6 aluminum.
This ensures the mount can withstand significant abuse without adding unnecessary weight to your firearm. The hard coat anodized finish provides excellent corrosion resistance. The lower 1/3 co-witness height is crucial for maintaining situational awareness and providing a backup sighting option in case the optic fails.
Performance & Functionality
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 excels at its primary function: securely mounting your Aimpoint Micro T2 and maintaining zero. It is incredibly easy to install and provides a rock-solid platform for your optic. Its strengths lie in its simplicity, durability, and precise engineering.
One potential area for improvement could be the addition of a quick-detach mechanism for faster optic removal and reattachment. Overall, the mount meets and exceeds expectations, providing a reliable and effective solution for mounting your Aimpoint Micro T2.
Design & Ergonomics
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 boasts a sleek and minimalist design. Its construction is robust, while remaining lightweight. The mount is comfortable to use, and the lower 1/3 co-witness height provides an optimal viewing experience.
There is virtually no learning curve associated with its installation or use.
Durability & Maintenance
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 is built to last. The 6061-T6 aluminum construction and hard coat anodized finish ensure exceptional durability and corrosion resistance. With proper care, this mount should provide years of reliable service.
Maintenance is straightforward. A simple wipe down with a clean cloth is typically all that is needed to keep it in top condition.
Accessories and Customization Options
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 is primarily designed for use with the Aimpoint Micro T2 and similar footprint optics. It does not require any additional accessories for installation. The mount is compatible with standard AR-15 upper receivers and should work seamlessly with most aftermarket handguards and rails.
While there are no specific customization options for the mount itself, the wide availability of Aimpoint Micro T2 accessories allows for significant personalization of your overall optic setup.
Pros and Cons of BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2
Pros
- Extremely durable construction: Built to withstand the rigors of demanding use.
- Rock-solid zero retention: Keeps your optic locked in place for consistent accuracy.
- Lower 1/3 co-witness height: Provides seamless integration with iron sights.
- Simple and easy to install: No complicated procedures or special tools required.
- Lightweight design: Minimizes added weight to your firearm.
Cons
- No quick-detach mechanism: Removing and reattaching the optic requires tools.
- Limited customization options: Few options for altering the mount’s configuration.
Who Should Buy BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2?
The BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 is perfect for shooters who demand reliability and durability from their optic mounts. This includes tactical shooters, law enforcement professionals, and competitive shooters. Anyone looking for a no-nonsense, rock-solid mounting solution for their Aimpoint Micro T2 will be well-served by this product.
Those who prioritize a quick-detach mechanism or require extensive customization options may want to consider alternative mounts. A must-have accessory is a high-quality Aimpoint Micro T2 red dot sight to pair with the mount.
Conclusion on BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2
In summary, the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 is an outstanding optic mount that delivers exceptional performance and reliability. Its rugged construction, rock-solid zero retention, and lower 1/3 co-witness height make it a top choice for serious shooters. While it lacks some advanced features like a quick-detach mechanism, its simplicity and durability more than compensate.
The value proposition is excellent, as the mount provides a level of quality and performance that justifies its price point. I would wholeheartedly recommend the BCM At Optic Mount Lower 1/3 For Aimpoint Micro T2 to anyone seeking a dependable and effective mounting solution for their Aimpoint Micro T2. Upgrade your optic setup today and experience the difference that a high-quality mount can make!