B/C PATCH 1-1/8″ SQUARE Review

The B/C PATCH 1-1/8″ SQUARE Made a Bold First Impression

Cleaning a firearm is a task I take seriously, bordering on religiously. Over the past decade, I’ve used countless patches, from cheap cotton squares to premium, lint-free options. When I needed to re-up on supplies for maintaining my .22 and .25 caliber firearms, the B/C PATCH 1-1/8″ SQUARE from B/C caught my eye due to the advertised quantity and price point.

I’ve been consistently battling excessive lint left behind by inferior patches. My goal was to find a cost-effective cleaning solution that wouldn’t require me to spend more time picking stray fibers out of my bore than actually cleaning it.

The B/C PATCH 1-1/8″ SQUARE comes in a simple, no-frills plastic bag containing 1000 patches. Initial inspection revealed clean-cut edges and a uniform size, which was a welcome sight compared to some of the ragged, inconsistently-sized patches I’ve used in the past. I was initially hesitant, as the price seemed almost too good to be true.

I’ve used generic patches from various brands, as well as more expensive, pre-cut patches from Hoppe’s and Otis. I chose the B/C PATCH 1-1/8″ SQUARE over the others primarily because of the quantity offered for the price. The promise of a thousand patches for under $8 was an offer I couldn’t refuse, especially if they proved to be reliable.

My first impression was one of cautious optimism. I was hoping these patches would be a game-changer for routine cleaning, but I was also prepared for the possibility of them being just another set of mediocre cleaning cloths. The proof, as always, would be in the cleaning.

Real-World Testing: Putting B/C PATCH 1-1/8″ SQUARE to the Test

First Use Experience

My initial testing ground was my trusty .22 LR rifle after a day of plinking at the range. The bore was moderately fouled with powder residue and lead. I saturated a B/C PATCH 1-1/8″ SQUARE with bore solvent and ran it through the barrel using a standard cleaning rod.

The patch fit snugly but not overly tight, providing good contact with the bore’s surface. After the first pass, the patch came out visibly dirty, as expected. I repeated the process several times, and surprisingly, I noticed very little lint left behind in the barrel.

I tested the patches in both dry and slightly damp conditions. They held up well whether applying solvent or simply wiping down parts. I did notice that they can tear a little more easily when heavily saturated with solvent and pushed through a tight bore, so moderate saturation is key.

After the first cleaning session, I was pleasantly surprised by the performance. The B/C PATCH 1-1/8″ SQUARE cleaned effectively and left minimal lint. I considered this a significant improvement over the cheaper patches I had previously used.

Extended Use & Reliability

After several weeks of consistent use on multiple firearms, the B/C PATCH 1-1/8″ SQUARE has proven to be a reliable cleaning solution. I’ve used them on my .22 pistol, my .25 caliber air rifle, and even for general gun maintenance. They have consistently performed well.

The patches have shown no significant signs of wear and tear, aside from the occasional tear when excessively soaked with solvent. They’ve maintained their integrity and cleaning effectiveness throughout the testing period.

Maintenance is virtually nonexistent, as these are disposable patches. I keep them stored in their original bag within my cleaning kit. They are easy to grab as needed. Cleaning rods and bore brushes are what require the most maintenance.

Compared to my previous experiences with cheaper, lint-filled patches, the B/C PATCH 1-1/8″ SQUARE has been a breath of fresh air. They’ve simplified my cleaning routine and reduced the amount of time I spend removing lint. This has led to more efficient and enjoyable cleaning sessions.

Breaking Down the Features of B/C PATCH 1-1/8″ SQUARE

Specifications

The B/C PATCH 1-1/8″ SQUARE is specifically designed for cleaning firearms chambered in .22 to .25 caliber. Each patch measures approximately 1-1/8 inches by 1-1/8 inches, making them ideally sized for these smaller bores.

The patches are constructed from a cotton material that provides good absorbency for solvents and oils. One bag contains 1000 individual patches. This provides an ample supply for regular cleaning and maintenance. The relatively thin, woven nature helps to remove debris while minimizing linting.

These specifications matter because the correct size patch ensures proper bore coverage and cleaning efficiency. The absorbent cotton material helps to lift away fouling and residue. The large quantity ensures that you won’t run out of cleaning supplies anytime soon.

Performance & Functionality

The B/C PATCH 1-1/8″ SQUARE performs its job admirably. The patches effectively remove powder residue, lead fouling, and other debris from the bore.

Their primary strength lies in their balance of cleaning power and low lint. They do an excellent job of cleaning without leaving excessive fibers behind. One minor weakness is their tendency to tear when overly saturated with solvent.

The B/C PATCH 1-1/8″ SQUARE meets my expectations and, in some ways, exceeds them. The price point combined with the performance makes them an exceptional value.

Design & Ergonomics

The B/C PATCH 1-1/8″ SQUARE is a simple, utilitarian product. The design is straightforward – a square piece of cotton material cut to the appropriate size.

They are lightweight and easy to handle. There is no learning curve. They’re incredibly user-friendly. The simplicity of the design contributes to their overall effectiveness.

Durability & Maintenance

The patches themselves are disposable. Their lifespan is limited to a single cleaning pass.

There is no maintenance required for the patches themselves. Proper storage in a dry place will prevent them from becoming soiled or damaged. The simple design means there is nothing to repair.

Accessories and Customization Options

The B/C PATCH 1-1/8″ SQUARE does not come with any accessories. They are intended to be used in conjunction with other cleaning tools, such as cleaning rods, bore brushes, and solvents.

There are no customization options available for these patches. They are designed to be used as-is. They work well with most standard cleaning kits and accessories.

Pros and Cons of B/C PATCH 1-1/8″ SQUARE

Who Should Buy B/C PATCH 1-1/8″ SQUARE?

The B/C PATCH 1-1/8″ SQUARE is perfect for anyone who owns and regularly cleans firearms chambered in .22 to .25 caliber. This includes plinkers, target shooters, small game hunters, and anyone looking for a cost-effective and reliable cleaning solution.

Those who prioritize ultra-premium, lint-free patches, regardless of cost, might skip this product. These patches perform well for their price point, but they are not quite as lint-free as some of the higher-end options.

Must-have accessories include a quality cleaning rod, bore brush, and your preferred bore solvent or cleaning oil. A good cleaning mat is also highly recommended to protect your work surface.

Conclusion on B/C PATCH 1-1/8″ SQUARE

The B/C PATCH 1-1/8″ SQUARE is a surprisingly effective and affordable cleaning solution for small-caliber firearms. While not perfect, their low lint and excellent value make them a standout product in a crowded market.

The price of $7.99 for 1000 patches is more than justified by the performance and convenience they offer. These patches strike a great balance between cost and quality.

I would absolutely recommend the B/C PATCH 1-1/8″ SQUARE to anyone looking for a reliable and inexpensive way to keep their .22 and .25 caliber firearms clean. Stock up on these patches and say goodbye to excessive lint and hello to a cleaner, more efficient cleaning routine!