Altra Glue In Point .246 100 gr. Review

The Altra Glue In Point .246 100 gr. Made a Bold First Impression

Choosing the right arrow point can feel like splitting hairs, but experienced archers know it’s a critical decision. I’ve seen countless archers handicap themselves with mismatched components. My search for a reliable, consistent point for target practice and 3-D shooting led me to the Altra Glue In Point .246 100 gr.

Unboxing the Altra points revealed a no-nonsense package. The points themselves appeared clean and precisely machined. The hardened 416 stainless steel exuded quality; they had a reassuring heft that spoke to their durability, a quality often lacking in cheaper points.

I’ve used various glue-in points over the years, from generic bulk packs to more expensive, branded options. The Altra points immediately stood out compared to the cheaper points due to their superior finish and consistent dimensions. They seemed a step above points like the Easton CB points, which I’ve found can sometimes vary slightly in weight within the same batch. I chose the Altra points over options like the heavier Ethics Archery Outserts because I prefer the simplicity and traditional feel of glue-in points for target archery.

My first impression was one of quiet confidence. I wasn’t blown away by flashy marketing or exotic materials, but the solid construction and practical design suggested a product that would perform consistently, and that’s precisely what I look for in archery equipment. I was eager to get these points glued into my arrows and see how they performed downrange.

Real-World Testing: Putting Altra Glue In Point .246 100 gr. to the Test

First Use Experience

My first test of the Altra Glue In Point .246 100 gr. took place at my local outdoor archery range. The day was slightly overcast with a light breeze, providing typical conditions for a weekend practice session. I was using my custom-built arrows with Altra‘s points glued in using a high-quality epoxy adhesive.

The points proved remarkably easy to install and, even more importantly, flew true right from the start. They grouped tightly at 30 yards, and their consistent weight ensured a uniform point of impact. There were no noticeable wobbles or deviations in flight, even when shooting through the slight crosswind.

Extended Use & Reliability

After several weeks of regular use, the Altra Glue In Point .246 100 gr. points have consistently impressed me. There has been no noticeable wear and tear, even after repeated impacts with the target. The hardened stainless steel has resisted bending and deformation, which is a common problem with softer arrow points.

The points require minimal maintenance. An occasional wipe down with a clean cloth to remove any dirt or adhesive residue is all that’s needed. They’ve exceeded my expectations. They outperform the cheaper, generic points I’ve used in the past in terms of both accuracy and durability, making them a worthwhile investment.

Breaking Down the Features of Altra Glue In Point .246 100 gr.

Specifications

• Material: Hardened 416 Stainless Steel. This robust material ensures longevity and resistance to bending or deformation upon impact.
• Weight: 100 grains. This standard weight provides a good balance between speed and kinetic energy for target and 3-D archery.
• Diameter: .246 inches. Specifically designed to fit Altra .246 arrow shafts perfectly for seamless integration and optimal aerodynamics.
• Quantity: 12 points per pack. Provides enough points to equip a full set of arrows, plus spares for replacements or repairs.
• Insert Compatibility: Accepts non-micro FMS insert weights. Allows for fine-tuning of front-of-center (FOC) to optimize arrow flight and accuracy.

Performance & Functionality

The Altra Glue In Point .246 100 gr. performs its job admirably, providing consistent accuracy and reliable performance. Their uniform weight and precise dimensions contribute to tight groupings at various distances. The points’ strength ensures they hold up well to repeated impacts, even when shooting into dense target materials.

The only slight weakness is that glue-in points, by nature, are more challenging to replace in the field compared to screw-in points. However, the superior accuracy and durability outweigh this inconvenience for most target archers. The points meet and exceed my expectations. They deliver consistent performance and long-lasting durability, making them a valuable component of my archery setup.

Design & Ergonomics

The Altra Glue In Point .246 100 gr. features a simple, functional design. The bullet-shaped profile promotes smooth penetration into targets, minimizing drag and deflection. The points are well-machined with a clean, consistent finish.

The straightforward glue-in design requires no special tools for installation, although a quality arrow squaring device is recommended for optimal alignment. There’s no real learning curve involved; anyone familiar with basic arrow building techniques can easily install these points.

Durability & Maintenance

The hardened 416 stainless steel construction suggests that the Altra Glue In Point .246 100 gr. points will last for a considerable time. Even after extensive use, there are no signs of rust, bending, or chipping. Maintaining the points is straightforward: simply wipe them clean after each shooting session to remove any dirt or debris.

Replacing a damaged point requires heating the shaft to soften the adhesive, but this is a standard procedure for glue-in points and is relatively easy to perform with a heat gun or small torch. Overall, these points offer exceptional durability and ease of maintenance, contributing to their long-term value.

Accessories and Customization Options

The Altra Glue In Point .246 100 gr. is designed primarily for use with Altra .246 arrow shafts. They are also compatible with any other arrow shaft that accepts a .246 inside diameter point. The points themselves don’t offer extensive customization options beyond using FMS insert weights to adjust FOC.

Archers can further customize their arrows by using different fletching configurations, nock styles, and arrow wraps to fine-tune their overall performance and aesthetics. The compatibility with FMS insert weights is a notable feature, allowing archers to optimize arrow flight for specific shooting conditions and personal preferences.

Pros and Cons of Altra Glue In Point .246 100 gr.

Check Best Price HERE

Who Should Buy Altra Glue In Point .246 100 gr.?

The Altra Glue In Point .246 100 gr. is perfect for target archers, 3-D shooters, and anyone who prioritizes accuracy and durability in their arrow points. They are also well-suited for archers who appreciate the traditional feel and simplicity of glue-in points. Experienced archers who build their own arrows and understand the importance of consistent components will especially appreciate these points.

Those who frequently shoot in environments where points are easily damaged or lost may want to consider screw-in points for easier field replacement. Similarly, archers who are just starting out and are not yet comfortable with arrow building techniques may find screw-in points more convenient. For optimal performance, I highly recommend pairing these points with a high-quality arrow squaring tool and a reliable epoxy adhesive.

Conclusion on Altra Glue In Point .246 100 gr.

The Altra Glue In Point .246 100 gr. offers an exceptional combination of durability, accuracy, and value. They are a reliable and consistent choice for target archers and 3-D shooters who demand the best from their equipment. The price is justified by the long lifespan and consistent performance of these points.

I would wholeheartedly recommend the Altra Glue In Point .246 100 gr. to any serious archer looking for a dependable and accurate arrow point. Don’t settle for less; invest in quality components and elevate your archery game. Click here to purchase your Altra Glue In Point .246 100 gr. today and experience the difference!

Check Best Price HERE