Let’s Talk About Agency Arms Drop-In Trigger, 9/40/357
The Agency Arms Drop-In Trigger, 9/40/357 promises a significant upgrade to the factory Glock trigger, a common desire for many Glock owners. Agency Arms is a well-regarded name in the firearms industry, known for producing high-quality aftermarket parts and complete firearms, so the expectation is high. This drop-in trigger aims to provide a crisper, cleaner trigger pull with a more tactile reset, ultimately improving accuracy and shooting experience.
For years, I’ve searched for the “perfect” Glock trigger, something that retains reliability while providing the feel of a custom 1911 trigger. The promise of a flat-faced trigger shoe and tuned trigger bar from Agency Arms piqued my interest. I was tired of the mushy, unpredictable factory trigger in my Glock 19.
Upon unboxing the Agency Arms Drop-In Trigger, 9/40/357, I was immediately impressed by the solid feel and clean machining of the trigger shoe. The flat face is a welcome change from the curved factory trigger. The trigger bar appeared well-made and ready for installation, although the connector isn’t included, which is a notable omission.
Compared to other drop-in triggers I’ve tried, like the Apex Tactical Action Enhancement Kit or the Overwatch Precision TAC trigger, the Agency Arms offering seemed to strike a balance between performance and simplicity. I chose the Agency Arms Drop-In Trigger, 9/40/357 because I wanted a reliable upgrade without extensive modification or tuning. I hoped it would be a significant improvement over the factory trigger without sacrificing the Glock’s inherent reliability.
My first impression was cautiously optimistic. The parts looked great, but the true test would be in the installation and performance at the range. I was excited to see if it lived up to the hype, but slightly disappointed that the connector wasn’t included, adding an extra cost and step to the installation process.
Real-World Testing: Putting Agency Arms Drop-In Trigger, 9/40/357 to the Test
First Use Experience
I tested the Agency Arms Drop-In Trigger, 9/40/357 at my local outdoor range, a facility that provides diverse shooting scenarios, from static paper targets to dynamic steel challenges. I installed the trigger in my Glock 19, along with a Ghost 3.5 lb connector as suggested by other users. The range conditions were typical for a summer afternoon – sunny, dry, and around 85 degrees Fahrenheit.
The trigger performed noticeably better than the factory Glock trigger. The flat face allowed for consistent finger placement, and the pre-travel was reduced. The trigger break was crisper, though not as glass-like as some high-end custom triggers. However, the reset was positive and tactile, allowing for faster follow-up shots. There were no malfunctions or failures to ignite during the first range session.
The only minor issue was a slight grittiness during the initial break-in period, which smoothed out after a few hundred rounds.
Extended Use & Reliability
After several months of regular use, the Agency Arms Drop-In Trigger, 9/40/357 has proven to be a reliable and worthwhile upgrade. The trigger feel has remained consistent. There are no signs of significant wear and tear.
Cleaning and maintenance are straightforward. Simply follow standard Glock disassembly and cleaning procedures. I have used it in several training courses, enduring various weather conditions, and it has performed flawlessly.
Compared to my previous experiences with the factory trigger and other aftermarket options, the Agency Arms Drop-In Trigger, 9/40/357 offers a noticeable improvement in both feel and performance. It doesn’t turn a Glock into a 1911, but it provides a significant enhancement for faster, more accurate shooting. It exceeds my expectations for a drop-in trigger, especially when paired with an aftermarket connector.
Breaking Down the Features of Agency Arms Drop-In Trigger, 9/40/357
Specifications
The Agency Arms Drop-In Trigger, 9/40/357 is designed for Glock pistols chambered in 9mm Luger, .40 S&W, and .357 SIG. The trigger shoe is made from 6061 Aluminum, known for its strength and lightweight properties. The kit includes an Agency Arms flat-faced trigger shoe and a tuned OEM trigger bar.
The ambidextrous design makes it suitable for both right- and left-handed shooters. The connector is not included and must be purchased separately. The Agency Arms Drop-In Trigger, 9/40/357 is compatible with Gen 3 and Gen 4 Glock pistols. These specifications matter because they directly impact the feel, performance, and compatibility of the trigger system.
Performance & Functionality
The Agency Arms Drop-In Trigger, 9/40/357 significantly improves the shooting experience compared to the factory Glock trigger. The flat trigger face provides a consistent and comfortable contact point for the finger. This leads to more controlled and accurate trigger pulls.
The reduced pre-travel and crisper break contribute to better accuracy and faster follow-up shots. However, the trigger pull weight remains relatively close to the factory spec, unless paired with an aftermarket connector. The trigger performs its job admirably, providing a noticeable improvement in feel and control.
The strengths lie in the improved ergonomics and tactile feedback, while the main weakness is the requirement for a separate connector to achieve optimal performance. It meets expectations for a drop-in upgrade but requires additional investment for maximum benefit.
Design & Ergonomics
The Agency Arms Drop-In Trigger, 9/40/357 features a clean and functional design. The materials used are of high quality, and the machining is precise. The flat trigger face is comfortable and allows for consistent finger placement, improving ergonomics.
The weight is comparable to the factory trigger, maintaining the overall balance of the pistol. There is minimal learning curve. Installation is straightforward with basic Glock armorer skills.
Durability & Maintenance
The Agency Arms Drop-In Trigger, 9/40/357 is built to last, constructed from durable materials that can withstand regular use. The 6061 Aluminum trigger shoe is resistant to wear and corrosion. Maintenance is simple, requiring only routine cleaning and lubrication as part of regular firearm maintenance.
The trigger should last for thousands of rounds with proper care. Repair, if ever needed, would likely involve replacing the entire trigger assembly, which is a relatively easy process.
Accessories and Customization Options
The kit includes the Agency Arms flat-faced trigger shoe and a tuned OEM trigger bar. It does not include a connector. The primary customization option is the selection of a compatible aftermarket connector.
Popular choices include the Ghost 3.5 lb connector and the Lone Wolf 3.5 lb connector. These connectors can further reduce the trigger pull weight and improve the smoothness of the trigger. The Agency Arms Drop-In Trigger, 9/40/357 is also compatible with various aftermarket Glock frames and trigger housings.
Pros and Cons of Agency Arms Drop-In Trigger, 9/40/357
Pros
- Improved trigger feel with a flat trigger face.
- Reduced pre-travel and crisper break.
- Positive and tactile reset for faster follow-up shots.
- Durable construction using high-quality materials.
- Relatively easy drop-in installation.
Cons
- Connector not included, requiring additional purchase.
- Trigger pull weight similar to factory trigger without aftermarket connector.
- May require a brief break-in period to smooth out grittiness.
Who Should Buy Agency Arms Drop-In Trigger, 9/40/357?
The Agency Arms Drop-In Trigger, 9/40/357 is perfect for Glock owners looking for a noticeable improvement in trigger feel and performance without extensive modification. It is ideal for competitive shooters, law enforcement officers, and anyone who wants a more responsive and accurate trigger. It’s also suitable for those who prefer a flat-faced trigger design.
Those who should skip this product are individuals seeking a drastic reduction in trigger pull weight without purchasing additional components. It’s also not ideal for those uncomfortable with basic firearm disassembly and reassembly.
A must-have accessory is a quality aftermarket connector, such as the Ghost 3.5 lb connector, to fully realize the trigger’s potential.
Conclusion on Agency Arms Drop-In Trigger, 9/40/357
The Agency Arms Drop-In Trigger, 9/40/357 offers a worthwhile upgrade to the factory Glock trigger, providing improved feel, reduced pre-travel, and a crisper break. However, the omission of the connector is a notable drawback. It necessitates an additional purchase to achieve the desired trigger pull weight and smoothness.
At a price of $135.00, the value proposition is decent, considering the improved ergonomics and tactile feedback. However, the added cost of the connector should be factored in. I would personally recommend it to Glock owners seeking a reliable and noticeable trigger upgrade, provided they are willing to invest in a compatible connector.
The Agency Arms Drop-In Trigger, 9/40/357 is a solid product that enhances the Glock shooting experience. Consider purchasing this product if you’re looking to upgrade your Glock’s trigger but remember to factor in the additional cost of a connector for optimal performance.