CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set Review

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set Made a Bold First Impression

As a seasoned outdoor and tactical gear specialist, I’ve mounted countless optics on a wide array of firearms. I was intrigued when I first saw the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set. It promised simplicity and strength, essential qualities for any reliable optic mounting solution.

I needed a rock-solid mounting system for a new CVA Accura MR-X muzzleloader I was setting up for an upcoming elk hunt in the rugged mountains of Montana. I wanted to ensure that my scope could withstand the harsh recoil of magnum loads and maintain zero throughout the hunt. I wanted a one-piece design, as I’ve found that they tend to offer increased stability over multi-piece systems, especially on hard-kicking rifles.

Upon unboxing, I immediately noticed the clean lines and solid feel of the mount. The Z2 alloy construction felt substantial, and the black finish was smooth and even. I picked it up and felt it in my hand. It weighed a little more than I expected, which initially concerned me, but I was confident the added durability would be worth it.

Compared to some two-piece Weaver-style bases and rings I’ve used in the past, the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set seemed much simpler. I almost went with a set of Warne Maxima rings on Weaver bases. I also considered a Leupold BackCountry cross-slot mount. Ultimately, I chose the CVA Durasight because of its one-piece design and the positive user feedback regarding its ease of alignment and ability to hold zero.

My first impression was one of cautious optimism. I was excited to try out this mount and see if it lived up to the hype. The simplicity of the design and the positive user feedback boosted my confidence. I was eager to see if it would hold up under the demanding conditions of a backcountry elk hunt.

Real-World Testing: Putting CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set to the Test

First Use Experience

My first test of the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set took place at my local shooting range. I mounted a Leupold VX-3HD 3.5-10×40 scope on my CVA Accura MR-X, following the instructions included with the mount. The installation process was straightforward. I had it mounted and ready to go in a few minutes.

The weather conditions were less than ideal, with a light drizzle and a slight breeze. I proceeded to fire a series of shots at 100 yards, carefully observing the point of impact and making adjustments as needed. The mount performed admirably, exhibiting no signs of slippage or movement. The rifle’s recoil felt significant, but the mount held the scope firmly in place.

The ease of use was impressive. The one-piece design simplified the mounting process, and the medium height was perfect for my scope and rifle combination. Initially, I was concerned about potential alignment issues, but the mount proved to be remarkably precise. There were no surprises or issues during the first use. Everything worked exactly as advertised.

Extended Use & Reliability

After several weeks of rigorous testing, the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set has proven to be incredibly reliable. I’ve put hundreds of rounds through my muzzleloader, and the mount has consistently held zero. It performed flawlessly.

The mount has held up well. I have noticed some minor scratches on the finish, but nothing that affects its performance. I’ve used a gun cleaning solvent and a soft cloth to clean it after each shooting session. This is all it takes to maintain it.

Compared to my previous experiences with other mounts, the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set is a clear winner. It outperforms the competition in terms of ease of installation, stability, and reliability. The Warne rings I’ve used on my hunting rifle have required frequent re-tightening, which can be frustrating in the field. The CVA Durasight has remained rock solid since day one, giving me confidence in my equipment.

Breaking Down the Features of CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set

Specifications

• Construction: The mount is constructed from Z2 alloy, a durable material that offers excellent strength and resistance to corrosion. This ensures that the mount can withstand the rigors of heavy recoil and harsh weather conditions.
• Compatibility: The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set is designed to fit all CVA 2010 and newer break-action muzzleloader and centerfire rifles. This makes it a versatile option for CVA rifle owners.
• Scope Compatibility: The mount is designed to accommodate one-inch scopes. This is the most common size for rifle scopes, so most scopes on the market will work with it.
• Height: The mount features a medium height, which is suitable for a wide range of scope sizes and rifle configurations. A lower mount might cause scope-to-barrel clearance issues, while a taller mount might raise the scope too high for comfortable cheek weld.
• Finish: The mount has a black finish, which helps to prevent glare and provides a sleek, professional look. The finish also adds a layer of protection against corrosion.

These specifications are important because they directly impact the mount’s performance and user experience. The Z2 alloy construction provides the necessary strength and durability, while the compatibility with CVA rifles and one-inch scopes makes it a versatile choice. The medium height ensures proper scope-to-barrel clearance and comfortable cheek weld.

Performance & Functionality

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set performs its job exceptionally well. It securely holds the scope in place, maintaining zero even under heavy recoil. It offers stability, ease of use, and reliability.

The mount’s strengths lie in its simple yet robust design, ease of installation, and ability to hold zero. One area that could be improved is the finish, which is prone to scratching. A more durable coating would be a welcome addition.

The CVA Durasight meets my expectations. It provides a reliable and stable platform for my scope, allowing me to focus on making accurate shots. It provides a sense of confidence in my equipment.

Design & Ergonomics

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set features a clean and functional design. The one-piece construction simplifies installation. It eliminates potential alignment issues.

The build quality is good, with the Z2 alloy providing a solid and durable feel. The weight is reasonable, considering the mount’s robust construction. The mount is easy to handle and install. The simple design makes it easy to mount a scope.

Durability & Maintenance

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set is built to last. The Z2 alloy construction and solid design ensure that it can withstand the rigors of regular use. It will likely last for many years.

Maintenance is simple, requiring only occasional cleaning with a gun cleaning solvent and a soft cloth. The finish is prone to scratching. Extra care should be taken to avoid damaging it.

Accessories and Customization Options

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set does not come with any accessories. It is designed to be a complete mounting solution in itself. The mount’s compatibility with one-inch scopes allows for a wide range of customization options.

The mount is compatible with most one-inch scopes from popular brands like Leupold, Vortex, and Bushnell. This allows users to choose the scope that best suits their needs and preferences. Aftermarket scope levels can be added. These can help with long-range accuracy.

Pros and Cons of CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set

Check Best Price HERE

Who Should Buy CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set?

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set is perfect for CVA rifle owners who want a reliable, affordable, and easy-to-install scope mounting solution. It’s an excellent choice for hunters and recreational shooters. These users demand consistent accuracy from their rifles.

This product might not be suitable for shooters who require advanced customization options. Also, those who prefer a more robust and scratch-resistant finish should avoid this.

A must-have accessory for this mount is a high-quality scope. A scope level is also essential for ensuring proper alignment and maximizing accuracy. You might also want to have some thread locker for the screws.

Conclusion on CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set

The CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set is a solid performer that offers excellent value for the money. It’s easy to install, provides a stable platform for your scope, and holds zero even under heavy recoil. The simple design and affordable price make it an attractive option for CVA rifle owners.

The price is justified by the mount’s performance, reliability, and ease of use. It provides a cost-effective solution for mounting a scope on a CVA rifle.

I would highly recommend the CVA Durasight Dead-On Medium One Piece Base/Rings Mount Set to anyone looking for a reliable and affordable scope mounting solution for their CVA rifle. If you are looking for an easy-to-install, rock-solid mount that will hold zero, look no further. Get yours today and experience the difference!

Check Best Price HERE