First Thoughts on the 1911 FIRING PIN STOP
The 1911 FIRING PIN STOP is a seemingly small but crucial component in the legendary 1911 pistol platform. It secures the firing pin in place, preventing accidental discharge while also allowing the hammer to transfer energy efficiently. I was excited to receive this particular stainless steel offering, manufactured for Series 70 1911s in Commander, Government, and Officers models.
My journey to this product began when I noticed inconsistent ignition in my custom-built 1911. I suspected the original firing pin stop might be worn or slightly out-of-spec, causing light primer strikes. Upon opening the package, the 1911 FIRING PIN STOP appeared well-machined, with clean lines and a consistent stainless steel finish. The weight felt appropriate, neither too light nor too heavy, suggesting a quality piece of metal.
Compared to some MIM (Metal Injection Molded) firing pin stops I’ve encountered, this one felt significantly more robust. It seemed a far cry from the softer, less durable factory part it was intended to replace. My initial impression was one of cautious optimism; it looked like a solid upgrade, but the true test would come at the range.
Real-World Testing: Putting 1911 FIRING PIN STOP to the Test
First Use Experience
My initial test took place at my local indoor shooting range. I installed the 1911 FIRING PIN STOP in my Government model 1911 chambered in .45 ACP. The installation was straightforward, requiring only a few minutes and basic hand tools.
The first few magazines cycled without issue, and my initial concern of light primer strikes seemed to be resolved. Under the range’s bright lights, the stainless steel finish stood out, and I noted no immediate signs of wear after about 100 rounds. The action felt consistent, and there were no noticeable differences in recoil or cycling compared to the original part.
Extended Use & Reliability
After several range sessions and approximately 500 rounds, the 1911 FIRING PIN STOP continues to perform flawlessly. I’ve used a variety of ammunition types, from cheap range ammo to premium self-defense rounds, all with consistent ignition. The stainless steel shows no signs of rust or corrosion, despite regular cleaning with solvent.
Maintaining the 1911 FIRING PIN STOP is as simple as wiping it down with a lightly oiled cloth after each shooting session. It’s proved far more durable than the original factory part, showing no signs of deformation or wear. In comparison to other aftermarket firing pin stops I’ve used, this one stands out for its consistent performance and robust construction.
Breaking Down the Features of 1911 FIRING PIN STOP
Specifications
- Make: 1911. This identifies the component as specifically designed for the 1911 platform.
- Model: Commander, Government, Officers. This indicates compatibility with various 1911 frame sizes, offering versatility.
- Series 70. This denotes that the 1911 FIRING PIN STOP is designed for Series 70 1911s, lacking a firing pin safety mechanism.
- Stainless Steel. The stainless steel construction ensures corrosion resistance and increased durability.
These specifications are critical for ensuring proper fit and function within the 1911 platform. A correctly fitted firing pin stop is essential for safe and reliable operation.
Performance & Functionality
The 1911 FIRING PIN STOP performs its job admirably, securely retaining the firing pin and allowing for consistent hammer strikes. It has eliminated the light primer strike issues I previously experienced. The fit is snug and precise, and it functions reliably with various types of ammunition.
Its greatest strength lies in its simple, robust design and reliable functionality. While there’s little room for improvement on such a basic part, consistent quality control is paramount. The product meets expectations, providing a reliable replacement part for a crucial component.
Design & Ergonomics
The design is straightforward, adhering to the classic 1911 firing pin stop dimensions. The stainless steel finish is aesthetically pleasing and adds a touch of elegance to the pistol. Its weight is negligible, not affecting the overall balance or feel of the handgun.
The 1911 FIRING PIN STOP requires no special tools or expertise to install, making it user-friendly for even novice gunsmiths. There is no real learning curve associated with this part.
Durability & Maintenance
The stainless steel construction suggests excellent longevity. Regular cleaning and lubrication should ensure years of reliable service. The simplicity of the design minimizes potential failure points, enhancing durability.
The 1911 FIRING PIN STOP requires minimal maintenance beyond routine cleaning. Its construction should allow it to withstand the stresses of repeated firing cycles.
Accessories and Customization Options
No accessories are included with the 1911 FIRING PIN STOP, as it’s a standalone component. While there are no direct customization options for the firing pin stop itself, it can be paired with other aftermarket 1911 parts. Compatibility with various firing pins and springs is generally excellent, provided they are also designed for the 1911 platform.
Pros and Cons of 1911 FIRING PIN STOP
Pros
- Reliable firing pin retention ensuring consistent ignition.
- Durable stainless steel construction resists corrosion and wear.
- Compatible with Commander, Government, and Officers models.
- Easy to install with basic hand tools.
- Affordable upgrade over factory MIM parts.
Cons
- Requires proper fitting for optimal performance (minor filing may be necessary).
- Not compatible with Series 80 1911s (requires a different firing pin stop design).
Who Should Buy 1911 FIRING PIN STOP?
This 1911 FIRING PIN STOP is perfect for 1911 owners seeking a durable and reliable replacement part. It is ideal for gunsmiths, competitive shooters, and anyone who values the longevity of their firearm. Those building custom 1911s or restoring older models will find this an essential component.
Those with Series 80 1911s should skip this product, as it is not compatible. Novice gun owners who are uncomfortable disassembling their firearm should seek professional installation.
Must-have accessories include a proper 1911 disassembly tool and gunsmithing files for fitting if necessary. A high-quality firing pin and spring will complement this upgrade.
Conclusion on 1911 FIRING PIN STOP
The 1911 FIRING PIN STOP represents excellent value for its price of $15.99. The stainless steel construction and compatibility with various 1911 models make it a versatile and worthwhile upgrade. It resolved my initial light primer strike issues and instills confidence in the firearm’s reliability.
I would personally recommend this 1911 FIRING PIN STOP to any 1911 owner seeking a durable and dependable replacement part. Upgrade your 1911 today and experience the peace of mind that comes with knowing your firearm is equipped with quality components.
