Let’s Dive into Wilson Combat Trigger Conversion Unit
The Beretta 92 series pistol is a legend, known for its reliability and service record. However, one common complaint among Beretta 92/96 owners is the fragility of the trigger return spring. The Wilson Combat Trigger Conversion Unit offers a simple, drop-in solution to this problem while potentially improving trigger feel, promising enhanced reliability and performance for your Beretta.
I’ve been a Beretta 92 enthusiast for years, appreciating its smooth action and inherent accuracy. The factory trigger return spring, however, always seemed like a weak point waiting to fail. I needed a reliable upgrade that addressed this potential issue without requiring extensive gunsmithing.
The Wilson Combat Trigger Conversion Unit arrived in simple, no-frills packaging. Immediately, I noticed the clean machining and the smooth, silver finish of the Robar NP3 coated cam and pin. It felt solid and well-made, giving me confidence in its durability.
I considered other solutions, including replacing the factory spring with another factory spring. I chose the Wilson Combat unit because it offered a complete conversion, designed to be more robust and less prone to breakage. The promise of improved trigger feel was a bonus.
My initial reaction was cautiously optimistic. The unit appeared well-engineered, and the simplicity of the drop-in design was appealing. I was eager to see if it lived up to the claims of enhanced reliability and improved trigger pull.
Real-World Testing: Putting Wilson Combat Trigger Conversion Unit to the Test
First Use Experience
I installed the Wilson Combat Trigger Conversion Unit in my Beretta 92FS at my local shooting range. I was primarily interested in function testing, simulating high-volume shooting scenarios. The range offered a controlled environment to carefully evaluate its performance.
During testing, I fired approximately 200 rounds of varying grain weights. The pistol functioned flawlessly. There were no failures to return to battery or any other malfunctions related to the trigger system.
Installation was straightforward. However, I did notice a very slight improvement in trigger feel, it was negligibly lighter, but the biggest improvement was that the trigger pull was slightly smoother. This subtle difference was welcome.
Extended Use & Reliability
After several months and hundreds of rounds, the Wilson Combat Trigger Conversion Unit continues to perform reliably. The trigger pull remains consistent, and there are no signs of wear or degradation. It instilled a feeling of enhanced confidence that the trigger spring would not break or cause issues.
The NP3 coating appears to be holding up well, showing no signs of wear despite constant use. Regular cleaning with a solvent and light lubrication is all that’s needed to keep it running smoothly. The Wilson Combat Trigger Conversion Unit outperformed my expectations, providing a noticeable improvement in reliability.
Breaking Down the Features of Wilson Combat Trigger Conversion Unit
Specifications
- Manufacturer: Wilson Combat
- Gun Make: Beretta
- Gun Model: Beretta 92, Beretta 96 (metal trigger versions only)
- Color: Silver
- Material: Steel with Robar NP3 coating on cam and pin.
- Compatibility: Drop-in replacement for steel Beretta 92/96 triggers.
- Function: Eliminates trigger return spring breakage and reduces spring stacking.
These specifications are crucial because they directly impact the reliability and performance of the Beretta 92/96 pistol. The NP3 coating, for example, reduces friction and enhances lubricity.
Performance & Functionality
The Wilson Combat Trigger Conversion Unit excels in improving the Beretta 92/96’s reliability by eliminating the fragile trigger return spring. The trigger feel is noticeably smoother, though the reduction in pull weight is marginal. It is not significant enough to make a large improvement, but it is a slight enhancement over the original design.
The primary strength of this product is its ability to replace a known failure point with a more robust system. Some users have reported reset issues when combined with aftermarket trigger bars, highlighting a potential area for improvement. It more than meets expectations when installed in a standard Beretta.
Design & Ergonomics
The Wilson Combat Trigger Conversion Unit is a well-designed, drop-in replacement that requires no modification to the host firearm. The quality of materials used is evident, contributing to its durability. It’s a simple, yet effective design that prioritizes function over aesthetics.
The installation process is relatively straightforward and can be accomplished with basic tools. There is a slight learning curve to understand the orientation of the component, but the average shooter should not find it difficult to install.
Durability & Maintenance
The Wilson Combat Trigger Conversion Unit is constructed from high-quality steel and coated with Robar NP3, ensuring longevity. With proper maintenance, it should outlast the original trigger return spring. Durability is a key aspect of this upgrade, given the intended purpose of enhancing reliability.
Maintenance is minimal, requiring only occasional cleaning and lubrication as part of routine firearm maintenance. The NP3 coating aids in corrosion resistance, reducing the need for excessive cleaning.
Accessories and Customization Options
The Wilson Combat Trigger Conversion Unit is primarily designed as a standalone upgrade. It doesn’t require any specific accessories for proper function. Its compatibility with aftermarket trigger bars can be hit-or-miss, as some users have reported reset issues.
It integrates seamlessly with other Wilson Combat upgrades for the Beretta 92 series, such as their improved hammer springs. While not requiring specific accessories, it is best used with factory original parts.
Pros and Cons of Wilson Combat Trigger Conversion Unit
Pros
- Eliminates the weak factory trigger return spring, enhancing reliability.
- Easy drop-in installation, requiring no gunsmithing.
- Slightly improves trigger feel with smoother action.
- NP3 coated for enhanced lubricity and corrosion resistance.
- Peace of mind knowing a potential failure point has been addressed.
Cons
- Potential reset issues when combined with certain aftermarket trigger bars.
- Trigger pull reduction is very slight and may not be noticeable to all users.
- Not compatible with polymer triggers.
Who Should Buy Wilson Combat Trigger Conversion Unit?
The Wilson Combat Trigger Conversion Unit is perfect for Beretta 92/96 owners who prioritize reliability and want to address the potential failure of the factory trigger return spring. It is also great for users who want a slightly smoother trigger pull. It is also a cost-effective upgrade that provides a tangible benefit.
This product may not be suitable for users who are looking for a significant reduction in trigger pull weight. Or those who prefer to experiment with aftermarket trigger components that may cause compatibility issues. Individuals who prioritize competition-level trigger tuning might also find this upgrade too subtle.
A must-have modification to compliment this part is the Wilson Combat hammer spring.
Conclusion on Wilson Combat Trigger Conversion Unit
The Wilson Combat Trigger Conversion Unit is a worthwhile upgrade for Beretta 92/96 owners seeking enhanced reliability and a slightly improved trigger feel. It directly addresses a known weakness in the Beretta 92/96 platform. The installation is straightforward, and the potential benefits outweigh the minor drawbacks.
At $20.95, the price is justified, making it an affordable way to improve the performance and longevity of your Beretta. For the price, you can not go wrong in purchasing this upgrade. It offers an excellent value for the peace of mind it provides.
I would definitely recommend the Wilson Combat Trigger Conversion Unit to any Beretta 92/96 owner looking to improve the reliability of their firearm. I urge you to take the plunge and upgrade your trigger today.