Victory Screw in Back Weights Review

First Impressions of Victory Screw in Back Weights

The ability to fine-tune your arrow’s front-of-center (FOC) is crucial for optimal accuracy and penetration, especially for serious archers and hunters. Victory Screw in Back Weights promise a simple and effective way to achieve this, allowing archers to dial in their arrow setup for maximum performance. I was eager to see if these small weights could make a big difference in my arrow flight and downrange accuracy.

For years, I’ve struggled with achieving the perfect arrow flight, especially when switching between broadheads and field points. Getting consistent arrow groupings at longer distances has always been a challenge, and I suspected my FOC was partly to blame. The Victory Screw in Back Weights seemed like an affordable and straightforward solution to experiment with different FOC configurations without resorting to completely new arrow builds.

Upon receiving the package, my first impression was the simplicity of the design. The weights are small, precisely machined, and have a clean, silver finish. They felt solid and well-made, fitting snugly into the back of my Victory RIP TKO shafts. Compared to using weight tubes or specialized FOC-adjustable points, these back weights seemed incredibly convenient. I chose these over heavier points or wraps because I wanted a subtle adjustment, not a drastic overhaul of my arrow’s spine. My initial excitement stemmed from the potential for easy and effective FOC tuning.

Check Best Price HERE

Real-World Testing: Putting Victory Screw in Back Weights to the Test

First Use Experience

My first test of the Victory Screw in Back Weights was at my local archery range, a mix of indoor and outdoor lanes with distances ranging from 20 to 80 yards. I tested the weights on a set of six Victory RIP TKO arrows, leaving the other six as a control group. I immediately noticed a slight difference in arrow flight at 40 yards after installing the weights in the back of the arrow.

Initially, I experimented with just one weight per arrow, focusing on bare shaft tuning at 20 yards to see the immediate impact. The breeze picked up significantly during my outdoor testing, making it difficult to isolate the effect of the weights, but I could still see tighter groupings compared to the non-weighted arrows at the closer range. There were no initial issues with the weights loosening or impacting the arrow’s balance negatively.

Extended Use & Reliability

After several weeks of consistent shooting with the Victory Screw in Back Weights, I’ve seen a noticeable improvement in my arrow consistency, particularly at longer ranges. The weights have remained securely in place, with no signs of loosening or damage. I’ve also shot in light rain a couple of times, and the weights haven’t shown any signs of corrosion.

Durability has been excellent. The weights are surprisingly robust, even after repeated impacts with targets and the occasional pass-through. Maintaining them is simple – I just check them periodically to ensure they’re still snug and wipe them down with a cloth if they get dirty. Compared to my previous experience of using heavier points to adjust FOC, these Victory back weights provide a more subtle and refined tuning experience.

Breaking Down the Features of Victory Screw in Back Weights

Specifications

The Victory Screw in Back Weights are designed to be a simple, yet effective way to customize the FOC of your arrows. These weights are specifically designed for arrows with a .204 inside diameter. They come in a pack of 12, allowing for adjustments to multiple arrows in your set.

The weights themselves are made from a durable silver material, likely aluminum or a similar alloy, chosen for its lightweight properties and resistance to corrosion. The .204 size is intended to fit Victory shafts such as the Xtdrsion’s Rip, Rip TKO, Rip XV, and Carbon Trad. This specific diameter compatibility is crucial, as using them with incompatible shafts could damage the arrow or compromise its flight characteristics. The Manufacturer is Victory.

Performance & Functionality

The primary function of these weights is to allow shooters to fine-tune their FOC, impacting arrow flight, stability, and penetration. By adding weight to the back of the arrow, you effectively decrease the FOC percentage. This can be particularly beneficial for archers who find their arrows nosediving or fishtailing, indicating an imbalance in weight distribution.

The screw-in design makes installation and adjustment quick and easy. Simply screw the weights into the back of the arrow insert to experiment with different weight configurations. While subtle, the added weight to the back of the arrow can provide a counterbalance effect. However, the weights could be too light for archers seeking dramatic FOC adjustments.

Design & Ergonomics

The design of the Victory Screw in Back Weights is straightforward and functional. The silver finish is clean and professional-looking, blending seamlessly with most arrow wraps and fletchings. The weight is minimal, ensuring it doesn’t drastically alter the overall arrow weight.

The ease of installation is a major advantage. The screw-in design eliminates the need for specialized tools or messy adhesives, making it easy to experiment with different weight configurations at the range. There’s virtually no learning curve involved.

Durability & Maintenance

The Victory Screw in Back Weights are made from a durable material that should withstand repeated use without significant wear and tear. The screw threads are precisely cut, ensuring a secure fit and preventing the weights from loosening during flight. I expect these weights to last for several seasons with proper care.

Maintenance is minimal. Simply check the weights periodically to ensure they are still snug and wipe them clean with a cloth if necessary. Because of their simple design, no special tools or cleaners are required.

Accessories and Customization Options

The Victory Screw in Back Weights are themselves an accessory, designed to enhance the performance of your arrows. They are primarily intended to be used in conjunction with other arrow components, such as inserts, fletchings, and broadheads. There are no additional accessories that come directly with the Victory Screw in Back Weights.

While the weights are specifically designed for Victory shafts, they may be compatible with other arrow brands that use the .204 inside diameter standard. However, it’s essential to verify compatibility before use to prevent damage or performance issues. The ability to customize your FOC is critical to maximizing your setup.

Pros and Cons of Victory Screw in Back Weights

Check Best Price HERE

Who Should Buy Victory Screw in Back Weights?

The Victory Screw in Back Weights are perfect for archers and bowhunters who are seeking to fine-tune their arrow flight and optimize their FOC for improved accuracy and penetration. These weights are especially beneficial for those using Victory shafts with a .204 inside diameter, such as the RIP TKO, RIP XV, and Carbon Trad models. They would also be useful for archers who find their arrows nosediving or fishtailing, indicating an imbalance in weight distribution.

These weights may not be ideal for archers who are looking to make significant FOC changes or those who are using arrow shafts with a different inside diameter. Additionally, archers who are completely satisfied with their current arrow flight and performance may not find these weights necessary. Archers looking for a more dramatic change in FOC might want to consider experimenting with heavier points or arrow wraps.

Conclusion on Victory Screw in Back Weights

Overall, the Victory Screw in Back Weights are a simple, affordable, and effective way to fine-tune your arrow FOC and optimize your arrow flight. The screw-in design makes installation and adjustment quick and easy, and the durable construction ensures long-lasting performance. While the weight adjustment is subtle, it can make a noticeable difference in your arrow consistency and accuracy, especially at longer ranges.

At a price of $6.59 for a pack of 12, the Victory Screw in Back Weights offer excellent value for the money. The ability to experiment with different FOC configurations without investing in completely new arrow components makes these weights a worthwhile investment for any serious archer or bowhunter.

I would personally recommend the Victory Screw in Back Weights to anyone who is seeking to improve their arrow flight and consistency. If you’re a serious archer, don’t miss out on this affordable and effective tuning tool. Experiment with your FOC and discover the potential for enhanced accuracy and penetration.