First Impressions of Victory Screw in Back Weights 1206911
The Victory Screw in Back Weights 1206911 are designed to allow archers to fine-tune their arrow’s Front of Center (FOC), a critical factor in arrow flight and accuracy. Manufactured by Victory, these weights promise a simple and effective way to adjust arrow balance without requiring extensive modifications. As someone who’s spent years chasing the perfect arrow setup, I was eager to see if these weights lived up to the hype and offered a noticeable improvement in my shooting.
My journey to find these weights started with a frustrating pattern of inconsistent arrow flight, particularly with broadheads. I tried different fletchings and point weights, but nothing seemed to give me the consistent accuracy I desired. The promise of easily adjustable FOC using the Victory Screw in Back Weights 1206911 seemed like the perfect solution to finally achieve that level of precision.
Upon opening the package, the weights appeared well-machined and uniformly sized. Their silver finish gave them a clean, professional look, suggesting a product built with attention to detail. The weights felt substantial enough to make a meaningful impact on arrow balance, but not so heavy as to be cumbersome.
Compared to using traditional brass weight systems that require epoxy and permanent installation, these screw-in weights offered a welcome level of flexibility. I also considered using weight tubes inserted into the back of the shaft, but those often require cutting the arrow or dealing with rattling. These Victory weights seemed a far more elegant solution.
My initial impression was one of cautious optimism. The promise of fine-tuning arrow flight was enticing, but I remained skeptical until I could see the Victory Screw in Back Weights 1206911 in action on the range. I was definitely excited by the potential, but real-world results would ultimately determine their worth.
Real-World Testing: Putting Victory Screw in Back Weights 1206911 to the Test
First Use Experience
My first test of the Victory Screw in Back Weights 1206911 took place at my local archery range. I focused on shooting at distances from 20 to 50 yards. The day was fairly calm, with minimal wind, providing an ideal environment for assessing the impact of the weights.
I began by shooting a control group of arrows without any added weight, establishing a baseline for comparison. Then, I installed the weights in the back of several Victory Vforce arrows and repeated the process. I immediately noticed a difference in arrow flight, with the weighted arrows appearing to stabilize more quickly and group slightly tighter at longer distances.
Installation was straightforward, requiring only a few minutes to screw the weights into the back of the arrow shafts. The Victory Screw in Back Weights 1206911 fit snugly and securely, showing no signs of loosening during repeated shooting. There were no real surprises, except perhaps how subtle but noticeable the improvement in flight was.
Extended Use & Reliability
After several weeks of regular use, the Victory Screw in Back Weights 1206911 have held up remarkably well. The weights remain securely fastened, even after hundreds of shots. I have not observed any signs of wear or corrosion on the weights themselves.
The anodized finish has proven to be quite durable. The weights maintain their aesthetic appeal despite frequent handling. Cleaning is as simple as wiping them down with a dry cloth to remove any dirt or residue.
Compared to my previous attempts at adjusting FOC using wraps and heavier points, these weights have provided a far more consistent and reliable solution. They have significantly outperformed my expectations, delivering a noticeable improvement in accuracy and stability. I now consistently achieve tighter groupings at all distances.
Breaking Down the Features of Victory Screw in Back Weights 1206911
Specifications
The Victory Screw in Back Weights 1206911 are specifically designed for use with Victory Vforce and Vforce TKO arrow shafts with a .245 inside diameter. They are constructed from a lightweight metal, likely aluminum alloy, with a silver finish to resist corrosion. Each pack contains 12 individual weights, allowing for adjustments to multiple arrows.
- Diameter: .245 inches. This ensures a snug fit within compatible Victory arrow shafts.
- Material: Lightweight metal alloy (likely aluminum). Provides durability without adding excessive weight.
- Finish: Silver. Offers corrosion resistance and a clean aesthetic.
- Quantity: 12 per pack. Allows for adjustments to multiple arrows.
These specifications are important because they directly impact the arrow’s overall balance and flight characteristics. The correct diameter ensures a secure fit, preventing rattling or vibration during flight. The lightweight material minimizes the added mass, allowing for fine-tuning without drastically altering the arrow’s trajectory.
Performance & Functionality
The Victory Screw in Back Weights 1206911 excel at their primary function: allowing archers to customize their FOC. They provide a simple and effective means of adjusting arrow balance without the need for permanent modifications. This allows for experimentation and fine-tuning until the optimal arrow flight is achieved.
- Improved arrow stabilization. The added weight at the rear of the arrow helps to stabilize it in flight, reducing wobble and improving accuracy, especially with broadheads.
- Tighter groupings. By optimizing FOC, these weights contribute to more consistent arrow trajectories, resulting in tighter groupings on the target.
- Easy installation and removal. The screw-in design allows for quick and easy adjustments, making it simple to experiment with different weight configurations.
The primary strength of these weights lies in their ease of use and the noticeable impact they have on arrow flight. A potential weakness could be the limited adjustability; archers seeking extremely precise FOC adjustments might require a more complex weight system. Overall, the Victory Screw in Back Weights 1206911 meet and even exceed expectations for a product in this category.
Design & Ergonomics
The Victory Screw in Back Weights 1206911 are designed with simplicity and functionality in mind. The materials are high quality and lightweight. This provides confidence in the product’s durability and performance.
The weights are incredibly user-friendly. The screw-in design eliminates any learning curve.
Durability & Maintenance
The Victory Screw in Back Weights 1206911 appear to be built to last. Their aluminum alloy construction and anodized finish provide excellent corrosion resistance. With proper care, they should provide years of reliable service.
Maintenance is minimal, requiring only occasional cleaning to remove dirt or residue. The weights are easy to inspect for any signs of wear, and replacements are readily available if needed.
Accessories and Customization Options
The Victory Screw in Back Weights 1206911 themselves don’t require additional accessories, but they work seamlessly with other arrow components. They are designed to be used in conjunction with standard arrow points, nocks, and fletchings. They are compatible with any .245 ID Victory Vforce or Vforce TKO arrow shafts.
These weights don’t offer extensive customization options beyond the amount of weight added by each individual piece. However, this simplicity is part of their appeal, making them accessible to archers of all skill levels. More advanced archers may combine them with other FOC-enhancing accessories for even greater fine-tuning.
Pros and Cons of Victory Screw in Back Weights 1206911
Pros
- Simple and Easy Installation: Screw-in design allows for quick and effortless adjustments.
- Noticeable Improvement in Arrow Flight: Contributes to increased stability and tighter groupings.
- Durable Construction: Lightweight metal alloy and anodized finish ensure longevity.
- Cost-Effective Solution: Offers a budget-friendly way to customize arrow FOC.
- Compatible with Victory Vforce/TKO Arrows: Specifically designed for a perfect fit.
Cons
- Limited Adjustability: May not provide the extremely precise FOC control required by some advanced archers.
- Arrow Compatibility: Only compatible with specific Victory arrow shafts.
Who Should Buy Victory Screw in Back Weights 1206911?
The Victory Screw in Back Weights 1206911 are perfect for archers looking to improve their arrow flight and accuracy without making permanent modifications to their arrows. They are particularly well-suited for hunters who want to optimize their arrow setup for broadhead flight, as well as target archers seeking tighter groupings at longer distances. Beginners can benefit from these weights by learning the importance of FOC.
This product might not be ideal for archers who already have a highly refined arrow setup and are seeking marginal gains in performance. Also, those using arrow shafts with a different inner diameter (.245) should explore alternative solutions.
A must-have accessory when using these weights is a high-quality arrow squaring device to ensure proper nock alignment and prevent inconsistent arrow flight.
Conclusion on Victory Screw in Back Weights 1206911
Overall, the Victory Screw in Back Weights 1206911 are a valuable addition to any archer’s toolkit. They offer a simple, effective, and affordable way to fine-tune arrow FOC and improve accuracy. The Victory weights do what they claim!
At a price of $9.99, the Victory Screw in Back Weights 1206911 provide excellent value for money. The improvement in arrow flight and the ease of use more than justify the cost.
I would definitely recommend the Victory Screw in Back Weights 1206911 to any archer looking to take their shooting to the next level. If you’re tired of inconsistent arrow flight and want a simple way to optimize your setup, give these weights a try. You might be surprised at the difference they can make. Go ahead and grab a pack; you won’t regret it!