What Makes USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models Stand Out?
The USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models presents a compelling option for Savage 110 owners looking for a robust and reliable scope mounting solution. Wheeler Engineering is known for producing practical and affordable gunsmithing tools and accessories, and this one-piece mount continues that tradition. The integrated anti-cant level and 20 MOA elevation are unique features at this price point, promising enhanced accuracy and ease of installation.
I was looking for a stable and precise mounting system for a long-range build on my Savage 110. I needed something that would hold zero reliably and potentially allow me to reach out to greater distances without maxing out my scope’s internal adjustment. The Wheeler Engineering mount seemed to offer a good balance of features and affordability, especially considering it was used.
Upon unboxing, I immediately checked the used mount for any signs of damage or excessive wear. The 6061 aluminum construction felt solid and relatively lightweight. Even used, the mount appeared well-machined, and the integrated anti-cant level swung out smoothly.
I considered the Leupold Mark 4 one-piece mount and the Nightforce Ultralite, both known for their exceptional quality. However, their price points were significantly higher than the USED Wheeler Engineering mount. I chose the Wheeler Engineering mount because it offered a practical feature set at a significantly lower price, mitigating the risk associated with buying used.
My initial impression was cautiously optimistic. While I typically prefer new components, the used Wheeler Engineering mount seemed to be in good condition. The integrated features, like the anti-cant level and 20 MOA elevation, were especially appealing, but the true test would be its performance on the rifle.
Real-World Testing: Putting USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models to the Test
First Use Experience
I tested the USED Wheeler Engineering 1-PC Scope Mount at my local shooting range, mounting it on my Savage 110 chambered in .308 Winchester. The weather was clear and cool, around 50 degrees Fahrenheit, with a slight breeze. I fired a variety of ammunition, from standard 150-grain hunting loads to heavier 175-grain match rounds.
The mount held securely during the initial zeroing process. The integrated anti-cant level proved to be a helpful aid in ensuring the scope was perfectly level, contributing to consistent shot placement. No slippage or movement was detected after approximately 50 rounds.
I needed to re-tighten the screws slightly after the first five shots, but this is common with any new or used scope mount. Once properly torqued, the Wheeler Engineering mount held the scope firmly in place, even with the recoil of the .308 Winchester. There were no apparent issues in the first shooting session.
Extended Use & Reliability
After several weeks of use, including multiple trips to the range and a weekend hunting trip, the USED Wheeler Engineering 1-PC Scope Mount has proven to be surprisingly reliable. There are no signs of loosening or shifting, and my zero has remained consistent. This reliability is crucial for ethical hunting and accurate target shooting.
The mount shows some minor cosmetic wear and tear, as expected from a used item. However, the aluminum construction is holding up well, with no signs of corrosion or fatigue. The anti-cant level still functions smoothly, even after being exposed to some light rain during my hunting trip.
Maintaining the mount has been straightforward. Periodically checking the screw torque and cleaning off any dirt or debris with a cloth is all that’s required. It has outperformed my expectations, considering its used condition and lower price point compared to premium scope mounts.
Breaking Down the Features of USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models
Specifications
- The USED Wheeler Engineering 1-PC Scope Mount is constructed from 6061 aluminum, offering a balance of strength and weight. This material choice provides adequate rigidity for securing a scope without adding excessive bulk to the rifle.
- It is designed specifically for the Savage 10/110 family of bolt-action rifles, ensuring a precise fit. This dedicated design eliminates any potential compatibility issues and maximizes stability.
- The mount is offered in multiple ring sizes (1 inch, 30mm, and 34mm), providing versatility for various scope models. This flexibility allows the user to select the correct ring size to securely accommodate their optic.
- The integrated 20 MOA elevation in the base is a key feature for long-range shooting. This elevation allows for greater vertical adjustment within the scope, enabling the shooter to reach targets at extended distances.
- The mount also features an integrated swing-out anti-cant level. This ensures the rifle is held perfectly upright, eliminating canting errors that can significantly impact long-range accuracy.
Performance & Functionality
The USED Wheeler Engineering 1-PC Scope Mount performs its primary job exceptionally well, providing a stable and secure platform for mounting a scope. The consistent zero retention and user-friendly design make it a valuable asset for both hunting and target shooting.
The key strengths lie in its ease of installation and integrated features, making it a user-friendly option even for novice shooters. The 20 MOA elevation and anti-cant level noticeably improve long-range accuracy. The primary weakness would be the potential for wear on a used model.
The mount has exceeded my expectations given its used condition. It provides comparable performance to many new, more expensive mounts, making it an excellent value proposition.
Design & Ergonomics
The Wheeler Engineering 1-PC Scope Mount is designed with functionality and ease of use in mind. The 6061 aluminum construction provides a solid and lightweight base for mounting a scope.
The one-piece design simplifies installation, and the integrated anti-cant level ensures proper scope alignment. There is minimal learning curve involved.
Durability & Maintenance
Given its 6061 aluminum construction, the USED Wheeler Engineering 1-PC Scope Mount should last for many years with proper care. It is essential to regularly check screw torque and clean the mount to prevent corrosion or damage.
The mount is relatively easy to maintain and repair. Replacement screws and anti-cant levels are generally available from Wheeler Engineering or other aftermarket suppliers, ensuring longevity.
Accessories and Customization Options
The USED Wheeler Engineering 1-PC Scope Mount comes with the mount itself and the necessary mounting hardware. There are no further customization options directly offered by Wheeler Engineering.
It is compatible with a wide range of scopes and rings from other brands, providing flexibility for users to select the components that best suit their needs. Aftermarket accessories like bubble levels can be added for enhanced precision, but the built-in level negates the need.
Pros and Cons of USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models
Pros
- Affordable: Excellent value, especially considering it’s a used item and significantly cheaper than premium brands.
- Integrated Anti-Cant Level: Makes scope leveling easy and improves long-range accuracy.
- 20 MOA Elevation: Provides additional vertical adjustment for long-range shooting.
- Durable Construction: 6061 aluminum offers a good balance of strength and weight.
- Easy Installation: One-piece design simplifies the mounting process.
Cons
- Used Condition: Potential for existing wear and tear or unseen damage.
- Limited Customization: No direct customization options offered by Wheeler Engineering.
Who Should Buy USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models?
Perfect for: Hunters and target shooters on a budget who own a Savage 10/110 rifle and seek a reliable, feature-rich scope mounting solution. It is also suitable for beginners looking for an easy-to-install and level mount.
Who should skip this product? Shooters who demand absolutely pristine condition or require advanced customization options beyond standard scope rings. Those hesitant to buy used equipment should opt for a new mount.
Must-have accessories or modifications? A high-quality torque wrench is essential for proper installation. Consider purchasing new scope rings if the used rings are in poor condition.
Conclusion on USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models
The USED Wheeler Engineering 1-PC Scope Mount, Sav110, – 1 out of 6 models is a surprisingly capable and cost-effective option for Savage 110 owners. The integrated anti-cant level and 20 MOA elevation make it a standout choice at this price point, enhancing long-range accuracy.
The price is certainly justified, especially given the mount’s performance and features. It offers a substantial savings compared to new, premium scope mounts without significantly compromising on quality or functionality.
I would personally recommend it to anyone looking for a reliable and affordable scope mounting solution for their Savage 110, provided they carefully inspect the mount’s condition before purchasing. Don’t let the “used” tag scare you; with a little due diligence, you can snag a great deal. Level up your Savage 110 with the Wheeler Engineering mount and hit those distant targets with confidence!