What Makes USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models Stand Out?
In the world of pistol customization, achieving optimal performance often hinges on the smallest components. The USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models promises to deliver a secure and precise platform for mounting the popular Trijicon RMR red dot sight onto Glock Modular Optic System (MOS) pistols. This specific mounting kit, being a used item and one of seven models, introduces a layer of complexity and potential value that deserves careful examination.
My journey to this particular piece of gear started with a desire to enhance the accuracy and target acquisition speed of my Glock 19 MOS. I was exploring options to mount a Trijicon RMR that I had previously used on an AR-15 build. After researching various aftermarket solutions, I stumbled upon this used EDEMO kit at a discounted price, offering a potentially budget-friendly way to accomplish my goal.
Upon receiving the package, my initial impressions were mixed. While the mounting plate appeared structurally sound, the visible signs of wear and tear were definitely present. The finish was noticeably worn in certain areas, and there were faint scratches on the surface. I compared it to a brand-new Forward Controls Design RMR plate and a C&H Precision Weapons plate, both renowned for their tight tolerances and durable coatings. While those two were clearly superior in finish, the USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models presented itself as a cost-effective alternative, assuming it functions as intended. I was cautiously optimistic, intrigued by the potential savings but also wary of potential issues associated with used gear.
Real-World Testing: Putting USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models to the Test
First Use Experience
My first outing with the USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models was at my local shooting range. I mounted the plate onto my Glock 19 MOS, installed my Trijicon RMR, and proceeded to zero the optic.
The weather was slightly humid, and I was shooting outdoors, which introduced a small amount of glare. Initial mounting was straightforward, though I noticed that the screws felt slightly less secure than with higher-end plates. After about 50 rounds, I re-checked the screws to ensure they were still tight. After 150 rounds, I noticed the RMR’s zero had shifted slightly. This indicated that the mounting wasn’t as rock solid as I’d hoped.
Extended Use & Reliability
Over the following weeks, I continued to use the USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models during weekly range sessions. The plate did show signs of loosening over time. I had to periodically tighten the screws to maintain zero.
Durability-wise, the finish continued to wear, especially around the edges. Cleaning was easy enough, but the worn finish made it harder to remove carbon buildup. Compared to my experiences with the Forward Controls Design plate, which maintained its zero consistently and showed minimal wear, the USED EDEMO kit was noticeably less reliable. The shift in zero was frustrating, and the increased maintenance was a definite downside.
Breaking Down the Features of USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models
Specifications
The USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models is designed specifically for Glock pistols that have the Modular Optic System (MOS). This allows for direct mounting of red dot sights without requiring custom slide milling.
This kit accommodates the Trijicon RMR footprint. This is one of the most popular red dot sight footprints in the industry.
The material is likely aluminum, though the exact alloy is unknown due to the lack of EDEMO provided specifications. Aluminum provides a balance of weight and strength.
The kit includes the mounting plate and screws necessary for attaching the plate to the Glock MOS slide and the RMR to the plate. The specific thread types and lengths are not clearly documented by EDEMO.
The weight is minimal, likely less than an ounce. This adds negligible weight to the overall pistol.
These specifications are important because they directly impact the compatibility, stability, and overall performance of the red dot sight on the Glock pistol. A secure mount and proper alignment are essential for maintaining accuracy and reliability.
Performance & Functionality
The USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models, when properly installed and maintained, allows for faster target acquisition. It facilitates more precise aiming compared to iron sights.
The main weakness I found was the tendency for the mounting screws to loosen over time, leading to a shift in zero. The performance doesn’t quite meet the expectations of a premium mounting solution due to its inherent stability issues arising from its used condition.
Design & Ergonomics
The build quality shows wear and tear. The materials, while functional, are not as durable as those used in high-end plates.
It’s relatively user-friendly, assuming the correct screws are used and properly torqued. However, the used condition and lack of clear instructions can create a slight learning curve.
Durability & Maintenance
Given its used condition, the lifespan is potentially shorter compared to a new, higher-quality plate. Signs of wear are already evident.
Maintenance involves periodically checking and tightening the mounting screws and cleaning the plate. The worn finish makes it more challenging to remove carbon fouling.
Accessories and Customization Options
The kit itself does not offer many customization options. The primary function is to provide a mounting platform for the Trijicon RMR.
It’s compatible with any Trijicon RMR red dot sight. It’s also potentially compatible with other red dot sights that share the RMR footprint, though this would require careful verification of screw hole alignment.
Pros and Cons of USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models
Pros
- Cost-effective entry point for RMR mounting on a Glock MOS, especially when purchased used.
- Allows for faster target acquisition and improved accuracy compared to iron sights.
- Compatible with the widely popular Trijicon RMR footprint.
- Lightweight and adds minimal bulk to the pistol.
- Easy to install with basic tools, assuming the correct screws are provided.
Cons
- Potential for screws to loosen over time, leading to a shift in zero.
- Used condition means reduced durability and potential for pre-existing damage.
- Lack of clear specifications and documentation from EDEMO.
- The worn finish can make cleaning more difficult.
Who Should Buy USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models?
The USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models is perfect for budget-conscious shooters who want to experiment with red dot sights on their Glock MOS pistols without a significant investment. It’s also suitable for those who are comfortable with occasional maintenance and monitoring the mounting screws.
Someone who prioritizes ultimate reliability and durability should skip this product. Those who compete or rely on their pistol for self-defense may find the potential for shifting zero unacceptable and should invest in a higher-quality, new mounting plate from a reputable manufacturer like Forward Controls Design or C&H Precision Weapons.
A must-have accessory would be a high-quality torque wrench to ensure proper screw tension during installation. Using thread locker, such as Loctite, is also highly recommended to help prevent screws from loosening.
Conclusion on USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models
The USED EDEMO Trijicon RMR Mounting Kit for Glock MOS – 1 out of 7 models represents a budget-friendly option for mounting a Trijicon RMR on a Glock MOS pistol. However, the used condition introduces potential drawbacks that must be carefully considered.
The price is justified if you understand the limitations and are willing to accept the possibility of increased maintenance and reduced reliability.
I would cautiously recommend it for casual shooters or those on a very tight budget. For serious applications, investing in a new, high-quality mounting plate from a reputable manufacturer is a wiser choice. Ultimately, the decision depends on your budget, tolerance for risk, and intended use of the pistol. If you choose to go this route, be prepared to invest a little time in ensuring everything remains tight and properly zeroed.