First Thoughts on the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is a seemingly simple, yet critical component for anyone looking to mount the Trijicon RMRcc (Ruggedized Miniature Reflex Compact) red dot sight onto a Glock MOS (Modular Optic System) pistol. This matte black, one-piece plate promises a secure and precise interface. It bridges the gap between the optic and the pistol slide.
I had been searching for a reliable mounting solution after deciding to equip my Glock 19 MOS with an RMRcc. The factory MOS plates are functional, but I’ve always preferred a more streamlined, robust, and dedicated mounting system. I was looking for something that minimized the stack height and offered superior recoil resistance.
Upon unboxing the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black, I was immediately impressed by its clean design and solid feel. It has a reassuring weight that speaks to the quality of the materials used. The matte black finish is evenly applied and matches the aesthetic of my Glock perfectly.
I considered a few other options, including aftermarket plates from companies like Forward Controls Design and CHPWS. However, Trijicon’s reputation for quality and the promise of a precise fit swayed me. Also, some competitors had reported issues with screw lengths or plate thickness needing modification.
My first impression was one of quiet confidence. This mounting plate looks and feels like it will do its job perfectly. I was eager to install it and get my RMRcc zeroed.
Real-World Testing: Putting Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black to the Test
First Use Experience
I first tested the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black at my local outdoor shooting range. It was a clear, sunny day, providing optimal visibility for sighting in the RMRcc. I mounted the plate and optic onto my Glock 19 MOS in about five minutes using the supplied screws. The fit was perfect, with no gaps or movement.
The initial shots were promising. The RMRcc held zero consistently, and the plate showed no signs of shifting or loosening. I ran about 200 rounds of 9mm through the pistol, varying ammunition weights and brands to assess the plate’s ability to withstand recoil. Even with hotter loads, the RMRcc remained securely mounted.
The ease of use was also noticeable. The low profile of the plate allowed for a natural cheek weld and quick target acquisition. There were no issues with snagging during draws from the holster.
Extended Use & Reliability
After several months of use, the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black has proven to be incredibly reliable. I have put approximately 2000 rounds through my Glock 19 MOS with the plate installed. It has endured multiple range sessions and several IDPA matches.
The durability of the plate is excellent. There are no visible signs of wear and tear, despite frequent use and exposure to various environmental conditions. I have cleaned the pistol regularly after each shooting session. The plate’s matte black finish remains intact and corrosion-free.
Maintaining the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is incredibly simple. A quick wipe down with a cloth and a bit of gun solvent is all it takes to keep it clean. I have not had to tighten the screws or make any adjustments since the initial installation.
Compared to my previous experiences with other MOS adapter plates, the Trijicon offering is a clear winner. It inspires confidence and delivers consistent, reliable performance. I no longer worry about my optic shifting during rapid fire or under heavy recoil.
Breaking Down the Features of Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black
Specifications
- MFG/Model: RMRcc This clearly identifies that the plate is specifically designed for the RMRcc optic.
- Style: 1 Piece A one-piece design generally offers greater rigidity and simplicity compared to multi-piece systems.
- The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is machined from high-quality steel. This provides exceptional strength and durability to withstand repeated recoil.
- The plate features a precise fit for Glock MOS slides. It ensures optimal alignment and a secure mounting surface for the RMRcc.
- The matte black finish reduces glare and enhances corrosion resistance. It helps the plate blend seamlessly with the pistol’s aesthetics.
Performance & Functionality
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black performs its job flawlessly. It provides a stable and secure platform for mounting the RMRcc red dot sight. The optic remains firmly in place, even under heavy recoil, ensuring consistent zero retention.
The plate’s strengths lie in its simple, robust design and precise manufacturing. It eliminates the play and movement that can occur with inferior mounting solutions. It meets and exceeds expectations, delivering the reliability and performance that Trijicon is known for.
The only potential area for improvement could be the inclusion of a small vial of thread locker. This would offer an added layer of security for the mounting screws.
Design & Ergonomics
The build quality of the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is exceptional. The materials used are top-notch, and the machining is precise. The plate is lightweight, adding minimal bulk to the pistol.
The design is user-friendly, with no sharp edges or unnecessary features. There is virtually no learning curve involved in installation. Any experienced gun owner should be able to mount the plate and optic in a matter of minutes.
Durability & Maintenance
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is built to last. Its high-quality steel construction ensures long-term durability and resistance to wear and tear. With proper care and maintenance, it should provide years of reliable service.
Maintenance is minimal. A simple cleaning after each range session is all that is required to keep the plate in good condition. There are no small parts or intricate mechanisms that require special attention.
Accessories and Customization Options
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is specifically designed to work with the Trijicon RMRcc red dot sight. There are no other accessories that directly attach to the plate itself. It uses the factory supplied screws for the RMRcc, specific to mounting to a plate.
The primary customization option is the choice of red dot sight. The Trijicon RMRcc is an excellent optic, but other compatible micro red dots could potentially be used with the plate. Always verify compatibility before attempting to mount a different optic.
Pros and Cons of Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black
Pros
- Secure and stable mounting platform for the Trijicon RMRcc. The plate provides a rock-solid interface between the optic and the pistol slide, ensuring consistent zero retention.
- High-quality steel construction for exceptional durability. The plate is built to withstand the rigors of repeated recoil and long-term use.
- Precise fit for Glock MOS slides for optimal alignment. This eliminates any play or movement that can affect accuracy.
- Easy to install with minimal learning curve. Any experienced gun owner can quickly and easily mount the plate and optic.
- Low profile design maintains a natural cheek weld. This enhances comfort and improves target acquisition speed.
Cons
- The plate is designed exclusively for the Trijicon RMRcc.
- No thread locker is included.
Who Should Buy Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black?
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is perfect for Glock MOS owners who want to equip their pistols with a Trijicon RMRcc red dot sight. It is ideal for competitive shooters, law enforcement officers, and anyone who relies on their pistol for self-defense. Anyone seeking a streamlined and robust mounting solution will be very happy with the plate.
Those who should skip this product are individuals who do not own a Glock MOS pistol or those who prefer a different red dot sight. Also, if you are looking for a universal mounting plate that can accommodate multiple optics, this is not the right product for you.
A must-have accessory for this mounting plate is a high-quality thread locker. This will ensure that the mounting screws remain securely in place, even under heavy recoil. Blue Loctite 242 is generally considered the best option.
Conclusion on Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black
The Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black is an outstanding product that delivers on its promises. It provides a secure, reliable, and low-profile mounting solution for the Trijicon RMRcc red dot sight on Glock MOS pistols. Its build quality is excellent, and its performance is flawless.
The price of $51.49 is justified by the quality of the materials and workmanship, as well as the peace of mind that comes with knowing your optic is securely mounted. This is not an area where you want to cut corners, and Trijicon delivers a product that is worth every penny.
I would absolutely recommend the Trijicon RMRcc Mounting Plate For Glock MOS 1-Piece Matte Black to anyone looking to mount an RMRcc on their Glock MOS. Don’t settle for inferior mounting solutions. Invest in a product that will provide years of reliable service and enhance your shooting experience. Go ahead and upgrade your Glock MOS today.