Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models Review

What Makes Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models Stand Out?

The Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models is designed to allow the secure and reliable mounting of a Trijicon RMRcc red dot sight onto a Sig Sauer P365 pistol, replacing the factory rear sight. This steel mount provides a low-profile and robust platform for enhanced target acquisition and improved shooting performance. For those seeking to upgrade their P365 with a compact red dot, this mount offers a straightforward and dependable solution.

I’ve been running a Sig Sauer P365 as my EDC for years, appreciating its concealability and decent accuracy. However, my aging eyes were starting to struggle with the iron sights, especially in low-light conditions. I needed a reliable mounting solution to add a red dot for faster target acquisition and improved accuracy.

Upon unboxing the Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models, I immediately noticed the solid construction and clean machining. The steel felt substantial, giving me confidence in its ability to withstand recoil and daily carry. The package included the mount itself, two mounting screws, and a basic instruction guide.

I considered options from CHPWS and a couple of other manufacturers, but ultimately chose the Trijicon mount for its reputation for quality and compatibility with the RMRcc. The Trijicon name carries weight, and I wanted a mount I could trust implicitly. I wanted something with minimal fuss that was going to work the first time.

My first impression was one of cautious optimism. The mount appeared well-made, but the proof would be in the installation and performance. I was excited to see if it lived up to the Trijicon name.

Check Best Price HERE

Real-World Testing: Putting Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models to the Test

First Use Experience

My initial testing of the Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models took place at my local indoor shooting range. After professional installation (more on that later), I zeroed my RMRcc and ran several magazines through my P365. The mount felt solid and secure during firing.

Performance was excellent. The red dot held zero perfectly. Even after several rapid-fire drills, the mount remained firmly in place. I also tested it during a rainy outdoor session. The steel construction showed no signs of rust or corrosion.

Ease of use was pretty straightforward after installation. Presenting the pistol and acquiring the red dot was significantly faster and more intuitive compared to the iron sights. There was a slight learning curve in adjusting to the new sight picture, but overall, the transition was smooth.

The only minor issue was that the included screws were a bit tight during the initial installation, requiring some careful maneuvering to avoid stripping the heads. A professional installation is really recommended for this reason.

Extended Use & Reliability

After several months of consistent use, the Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models continues to perform flawlessly. It has endured countless range sessions, daily carry, and even a few tactical training courses. The mount shows no signs of loosening or shifting.

Durability is outstanding. There are only a few minor scratches on the surface of the steel. This is only from regular wear and tear from holster use. The finish has held up well despite exposure to sweat, cleaning solvents, and various weather conditions.

Maintenance is simple. I just wipe down the mount with a lightly oiled cloth after each range session to prevent any potential corrosion. It’s a quick and easy process that takes only a minute or two.

Compared to previous red dot mounting solutions I’ve used on other pistols, the Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models is far superior in terms of reliability and durability. It provides a more secure and stable platform for the RMRcc.

Breaking Down the Features of Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models

Specifications

The Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models is specifically designed to fit all Sig Sauer P365 models, excluding those with the factory-milled optic cut. This mount replaces the rear sight and allows the direct mounting of a Trijicon RMRcc red dot sight. It is constructed from steel and weighs approximately 34 grams (1.2 ounces).

The dimensions of the packaged product are 4 inches in length, 2.5 inches in width, and 1.5 inches in height, with a total package weight of 0.2 pounds. The mount itself measures 1.8 inches in length, 0.9 inches in width, and 0.1 inches in thickness, with a weight of just 0.1 ounces. These specifications are critical for ensuring a low-profile and lightweight setup, which is essential for concealed carry.

Performance & Functionality

The Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models excels in providing a stable and repeatable mounting platform for the RMRcc. It maintains zero effectively, even under heavy recoil and extended use. The low-profile design minimizes the added bulk, preserving the P365’s concealability.

The mount’s strength lies in its simplicity and robust construction. It’s a no-nonsense solution that does exactly what it’s designed to do. However, the fact that professional installation is recommended could be seen as a minor drawback for some users.

The mount definitely meets expectations. It provides a reliable and durable platform for mounting the RMRcc. I have no qualms.

Design & Ergonomics

The Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models features a minimalist design that blends seamlessly with the P365. The steel construction provides a solid and durable feel, while the low weight ensures minimal impact on the pistol’s overall balance. The footprint perfectly matches the RMRcc, resulting in a clean and integrated look.

The mount is exceptionally user-friendly after installation. There is no real learning curve beyond getting used to the red dot itself. It’s designed to be a simple and straightforward solution for adding an optic to your P365.

Durability & Maintenance

Given its steel construction, the Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models is built to last. With proper care, it should provide years of reliable service. It’s a worthwhile investment.

Maintenance is minimal, requiring only occasional cleaning and lubrication. The steel is corrosion-resistant, but regular maintenance will ensure longevity. I expect this mount to last as long as the P365 itself.

Accessories and Customization Options

The Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models comes with the necessary mounting screws. The primary customization option is the choice of RMRcc red dot sight. While the mount itself doesn’t offer much in the way of customization, it opens up a whole new world of possibilities for enhancing your P365’s performance with an optic.

The mount is specifically designed for the Trijicon RMRcc. Compatibility with other red dot sights is not guaranteed. Be sure to verify compatibility before attempting to mount any other optic.

Pros and Cons of Trijicon RMR cc Mount Plate for Sig Sauer 365, – 1 out of 34 models