Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum Review

Let’s Talk About Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum

The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum is a no-frills, direct-replacement optic mounting solution designed specifically for the Tps Arms M6 Takedown Rifle. Its simplicity, lightweight aluminum construction, and focus on red dot optic compatibility immediately set it apart. Priced attractively, it offers a potential upgrade for M6 owners seeking to ditch the factory rear sight in favor of a more modern sighting system.

My journey to this particular mount began when I started exploring options for mounting a red dot on my M6. The factory sights are functional, but for quicker target acquisition and enhanced accuracy, especially in dynamic scenarios, a red dot seemed like the ideal upgrade. After surveying the market for mounts that fit the M6’s mid-length receiver, the Tps Arms offering stood out due to its reported simplicity and direct-fit design.

Upon unboxing, the Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum appeared as expected: a cleanly machined piece of aluminum, finished in matte black. Its light weight was immediately noticeable. The two included mounting screws looked appropriately sized and of decent quality. Compared to potentially bulkier, more complex rail systems, this mount promised a streamlined and lightweight solution.

Other mounts I considered included some generic Picatinny rail sections that would require more modification. I also looked at a couple of QD (Quick Detach) mounts. However, the simplicity and seemingly secure fit of the Tps Arms mount won me over, prioritizing a clean look and reliable zero retention over quick detach capability for this specific application. My initial impression was one of cautious optimism; the mount looked well-made and fit for purpose. I was excited to see how it would perform on the rifle.

Check Best Price HERE

Real-World Testing: Putting Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum to the Test

First Use Experience

My initial testing of the Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum took place at my local outdoor range. I wanted to get a feel for the mount with my Holosun HS503CU red dot. The weather was dry and sunny, ideal conditions for zeroing and general handling.

The installation process was straightforward. Removing the factory rear sight and replacing it with the Tps Arms mount was a matter of minutes using the provided screws. Once the red dot was mounted and secured, I began the zeroing process at 25 yards. The mount felt solid, and I experienced no issues with it shifting during the initial shots.

After zeroing, I ran through a few drills, practicing transitions and rapid target acquisition. The red dot, now sitting lower and more directly in line with the bore than it would with some other mounting solutions, felt natural and intuitive. No immediate issues presented themselves during the initial range session.

Extended Use & Reliability

After several months of use, the Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum continues to perform admirably. I’ve put several hundred rounds through my M6 with the mount installed, and it has held zero consistently.

There are no signs of significant wear and tear. The matte black finish has proven durable, with only minor scratches from handling and transport. Maintenance is simple; a quick wipe down with a lightly oiled cloth after each range session is all that’s required.

Compared to my experience with some cheaper, generic mounts on other rifles, the Tps Arms mount is a clear winner in terms of reliability and zero retention. It’s simple, effective, and does exactly what it’s designed to do without any fuss. I am very pleased.

Breaking Down the Features of Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum

Specifications

• The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum is specifically designed for the Tps Arms M6 Takedown Rifle. This ensures a perfect fit and proper alignment with the receiver.
• It’s constructed from Aluminum, offering a lightweight yet durable platform for mounting optics. This keeps the overall weight of the rifle down, improving handling and maneuverability.
• The mount features a Picatinny style rail, providing compatibility with a wide range of red dot sights and other optics. This allows for flexible optic selection.
• The mount replaces the rear sight of the rifle. This creates a streamlined profile and positions the optic closer to the bore.
• The finish is Matte Black, reducing glare and providing a tactical appearance. This helps to minimize visibility and maintain a low profile.
• The length of the rail is 6.55 inches, offering ample space for optic placement. This ensures enough space for various optic sizes and eye relief adjustments.
• The included hardware consists of two mounting screws. These screws are designed to securely attach the mount to the M6 receiver.

Performance & Functionality

The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum excels in its primary function: providing a stable and reliable platform for mounting red dot optics on the Tps Arms M6 Takedown Rifle. Its straightforward design ensures that the optic sits securely, maintaining zero even after extended use. The mount does its job perfectly.

The mount’s simple design is both a strength and a potential limitation. While it’s incredibly easy to install and use, it doesn’t offer the flexibility of some more complex rail systems. For its intended purpose – mounting a red dot – it is perfect.

It definitely meets expectations. The mount provides a solid and reliable platform for optics.

Design & Ergonomics

The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum features a minimalist and functional design. Its aluminum construction keeps weight to a minimum, while its matte black finish blends seamlessly with the rifle. The mount feels very solid.

The installation is very straightforward. The mount replaces the factory rear sight without requiring any special tools or modifications.

Durability & Maintenance

Given its aluminum construction and simple design, the Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum is expected to last for many years with proper care. The matte black finish provides a decent level of protection against corrosion and wear. It is a durable piece of kit.

Maintenance is minimal; keeping the mount clean and free from debris is all that’s required. The simplicity of the design makes it easy to inspect and maintain.

Accessories and Customization Options

The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum is primarily designed to work with red dot sights that utilize a Picatinny mounting system. Common compatible brands include Aimpoint, Trijicon, Holosun, and Sig Sauer.

Since the mount replaces the rear sight, there are no further options with Tps Arms. The main customization element stems from the range of red dot optics that can be mounted. Be sure to use the appropriate mounting hardware for your chosen optic.

Pros and Cons of Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum

Check Best Price HERE

Who Should Buy Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum?

• Perfect for Tps Arms M6 Takedown Rifle owners looking to upgrade to a red dot sight.
• Ideal for shooters who prioritize simplicity, lightweight design, and reliable performance.

Who should skip this product? Anyone who doesn’t own a Tps Arms M6, or needs to mount traditional magnified scopes, or requires quick-detach functionality.

Must-have accessories or modifications? A quality red dot sight and appropriate mounting hardware (if not included with the optic) are essential.

Conclusion on Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum

The Tps Arms M6 Mid Length Scope Mount 1-piece Aluminum is a simple, effective, and affordable solution for mounting red dot optics on the Tps Arms M6 Takedown Rifle. It’s lightweight, easy to install, and provides a stable platform for maintaining zero. This allows you to focus on the target.

At $33.89, the price is more than justified. It offers a significant improvement over the factory sights without breaking the bank. The mount provides excellent value.

I would absolutely recommend it to any M6 owner looking to upgrade to a red dot. If you own a Tps Arms M6 and want to modernize your sighting system, give it a try. You won’t be disappointed!