First Impressions of The Gun Company CZ P10C Magwell
The The Gun Company CZ P10C Magwell promises to be a simple yet effective upgrade for the popular CZ P10C pistol. As someone with over a decade of experience in the tactical gear world, I’m always on the lookout for enhancements that offer a tangible improvement in performance without sacrificing reliability or concealability. This magwell boasts a low-profile design, compatibility with factory backstraps, and a unique “NEILSEN NOSE CUT” designed to aid in faster reloads.
I was drawn to this product specifically to improve my reload speeds with my EDC CZ P10C. I needed a magwell that wouldn’t significantly increase the pistol’s footprint, hindering concealed carry. The The Gun Company CZ P10C Magwell seemed to strike a balance between functionality and practicality.
Upon unboxing, the magwell felt solid and well-made. The 6061-T651 aluminum construction was immediately apparent, lending a sense of durability. The hard anodized finish appeared flawless. Its lightweight design also stood out.
There are other magwells on the market, some with more aggressive profiles for competition use. I opted for The Gun Company CZ P10C Magwell because it promised to be a more subtle, EDC-friendly upgrade. I was hoping for an enhancement that would facilitate quicker reloads without compromising my ability to comfortably carry the pistol concealed.
My first impression was cautiously optimistic. The design seemed promising, and the build quality appeared excellent. I was eager to see how it performed on the range.
Real-World Testing: Putting The Gun Company CZ P10C Magwell to the Test
First Use Experience
I tested the The Gun Company CZ P10C Magwell at my local shooting range. I ran through a series of drills, focusing on magazine changes under simulated stress. The weather was typical for a Texas afternoon; hot and humid.
The magwell definitely improved my reload speed, even on the first few attempts. The wider opening guided the magazine more easily into the well, reducing fumbling. I did find the “NEILSEN NOSE CUT” to be helpful for index finger placement and magazine stripping.
The only issue I encountered was with my factory CZ magazines equipped with +2 extensions; they did not seat properly. This was a significant problem, as those magazines are my go-to for increased capacity. I was disappointed this compatibility wasn’t mentioned upfront.
Extended Use & Reliability
After several weeks of regular use, the The Gun Company CZ P10C Magwell has held up well. The hard anodized finish shows no signs of wear, even after repeated holster draws. It still looks brand new.
Maintenance is simple. A quick wipe down with a lightly oiled cloth is all it takes to keep it clean. I haven’t experienced any issues with loosening or shifting during use.
Compared to not having a magwell at all, the The Gun Company CZ P10C Magwell is a clear improvement in reload speed and consistency. However, the magazine compatibility issue is a significant drawback that limits its overall usefulness. I have to switch back to the flush fit magazines for range training now.
Breaking Down the Features of The Gun Company CZ P10C Magwell
Specifications
The The Gun Company CZ P10C Magwell is manufactured by The Gun Company.
It is finished in a durable Black Hard Anodized coating. This provides resistance to scratches and corrosion.
The magwell is constructed from 6061-T651 aluminum. This material is known for its strength and lightweight properties.
It is specifically designed for the CZ P10C pistol. This ensures a precise and secure fit.
It features a NEILSEN NOSE CUT for improved index finger placement.
The magwell is designed to be compatible with all three factory backstraps. This allows users to maintain their preferred grip size and feel.
The finish is Bead Blasted then Hard Anodized per Mil-A-8625, Type 3, Class 2 teflon sealed. This provides superior durability and added comfort.
The magwell includes a proprietary plug with a 4-40 helicoil insert. This ensures maximum retaining strength.
Performance & Functionality
The The Gun Company CZ P10C Magwell increases the opening for magazine insertion, leading to faster and more reliable reloads. The wider mouth guides the magazine, minimizing the chance of fumbling under stress. The “NEILSEN NOSE CUT” aids in both index finger placement and magazine stripping, further enhancing reload efficiency.
However, the compatibility issue with CZ factory magazines equipped with +2 extensions is a significant weakness. This limits the magwell’s usefulness for those who rely on extended capacity magazines. Without modification, only flush-fitting magazines work reliably.
The magwell meets its basic function of improving reload speed with compatible magazines. But the lack of compatibility with popular magazine extensions is a notable oversight. I expected a more universal fit.
Design & Ergonomics
The build quality is excellent. The 6061-T651 aluminum feels solid and durable. The hard anodized finish is smooth and evenly applied.
The low-profile design is well-executed. It adds minimal bulk to the pistol, making it suitable for concealed carry. The magwell integrates seamlessly with the CZ P10C frame.
The installation is straightforward. It takes only a few minutes to install. There is no need for any special tools or gunsmithing skills.
Durability & Maintenance
The 6061-T651 aluminum construction and hard anodized finish ensure long-term durability. The magwell is resistant to scratches, corrosion, and general wear and tear. It should withstand years of use.
Maintenance is minimal. A quick wipe down with a lightly oiled cloth is all that’s required to keep the magwell clean and functioning properly. I don’t foresee any issues with longevity.
I expect this magwell to last for the lifetime of my pistol. The material and finish are high quality and will withstand lots of use.
Accessories and Customization Options
The The Gun Company CZ P10C Magwell comes with a proprietary plug for secure attachment. The plug includes a 4-40 helicoil insert for maximum retaining strength. This ensures a reliable and stable connection to the pistol frame.
There are no other included accessories. Nor are there any readily apparent customization options beyond the finish color (black). Users can, of course, customize their P10C with other aftermarket parts, such as triggers, sights, and grips, independently of the magwell.
The lack of included accessories is understandable, given the magwell’s simple design. It is a straightforward enhancement that focuses on improving reload speed.
Pros and Cons of The Gun Company CZ P10C Magwell
Pros
- Significantly improves reload speed with compatible magazines. The wider opening guides the magazine more easily, reducing fumbling.
- Durable 6061-T651 aluminum construction with hard anodized finish. Ensures long-lasting performance and resistance to wear and tear.
- Low-profile design is ideal for concealed carry. Adds minimal bulk to the pistol.
- Easy to install. No special tools or gunsmithing skills are required.
- NEILSEN NOSE CUT aids in index finger placement and magazine stripping. This enhances reload efficiency.
Cons
- Incompatible with CZ factory magazines equipped with +2 extensions. This is a significant limitation for users who rely on extended capacity magazines.
- Relatively high price point. There are other magwells on the market that offer similar performance at a lower price.
Who Should Buy The Gun Company CZ P10C Magwell?
The The Gun Company CZ P10C Magwell is perfect for CZ P10C owners who prioritize faster reloads and use flush-fitting magazines. It’s also well-suited for those who carry concealed and want a low-profile magwell that won’t significantly increase their pistol’s footprint. This product is also suitable for range shooters, and home defense users.
This product isn’t suitable for those who rely on CZ factory magazines with +2 extensions, unless they’re willing to modify the magazines. Those looking for the cheapest possible option might want to consider alternative magwells with a more aggressive design for competition.
A must-have accessory would be additional flush-fitting magazines, since extended magazines aren’t compatible. Ensure you have a quality holster that properly accommodates the slightly increased dimensions of the pistol with the magwell installed.
Conclusion on The Gun Company CZ P10C Magwell
The The Gun Company CZ P10C Magwell offers a tangible improvement in reload speed and consistency for the CZ P10C. The build quality is excellent, and the low-profile design makes it suitable for concealed carry. However, the incompatibility with CZ factory magazines equipped with +2 extensions is a significant drawback that limits its overall value.
The price of $79.99 is a bit steep, considering the magazine compatibility issue. There are other magwells on the market that offer similar performance at a lower price point.
Despite its drawbacks, I would still recommend The Gun Company CZ P10C Magwell to those who prioritize faster reloads and use flush-fitting magazines. Just be aware of its limitations and ensure it meets your specific needs before making a purchase. If you are okay with using only the factory magazines, then this is a good choice.