First Thoughts on the Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap
The Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap promises enhanced control and comfort for Glock subcompacts without adding significant bulk, a common desire among concealed carriers. From Talon Grips, this adhesive grip aims to improve handling and confidence.
Years of carrying and training have taught me the importance of a secure grip. My search for the perfect grip enhancement for my Glock 27 Gen4 led me to the Talon Grips 116R Adhesive Grip.
Unboxing revealed a precisely cut piece of textured rubber. The material felt pliable yet durable, and the cutouts appeared accurate for my Glock 27 Gen4. The low profile and minimal added bulk were immediately appealing.
I considered options like stippling, but the permanence and potential frame damage deterred me. Other slip-on grips added too much girth for comfortable concealed carry, making the Talon Grips a promising middle ground. My initial excitement stemmed from the possibility of improved grip without compromising concealability or permanently altering my firearm.
Real-World Testing: Putting Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap to the Test
First Use Experience
I installed the Talon Grips 116R on my Glock 27 Gen4 and headed to my local range. The installation was straightforward, requiring only a few minutes and a hair dryer, as recommended by Talon Grips. The grip immediately felt more secure in my hand.
The rubber texture provided a significant improvement over the factory polymer frame, especially in hot and humid conditions. Even with sweaty hands, the grip remained positive. During rapid-fire drills, I noticed improved control and reduced muzzle flip.
There was a slight learning curve in re-holstering, as the added texture initially created more friction with my Kydex holster. However, with a little practice, this became a non-issue. No other issues arose during my first range session, and the Talon Grips 116R exceeded my initial expectations.
Extended Use & Reliability
After several months of daily carry and regular range sessions, the Talon Grips 116R has held up remarkably well. There are no signs of peeling or shifting, even after being subjected to sweat, solvents, and holster wear.
The texture remains grippy, though it has slightly smoothed in high-contact areas. Cleaning is simple, requiring only a damp cloth. Compared to the slick factory grip, the Talon Grips 116R has significantly improved my confidence in handling and shooting my Glock 27. My previous experiences with other grip enhancements were short-lived due to peeling or discomfort, but this grip has proven to be a reliable and worthwhile addition.
Breaking Down the Features of Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap
Specifications
The Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap is a precision-cut, adhesive-backed grip made from textured black rubber. It is specifically designed for Glock 26, 27, 28, 33, and 39 Gen4 models without the use of backstraps.
The rubber material provides a non-slip surface, enhancing grip and control. Its thin profile adds minimal bulk to the firearm, preserving concealability. The grip offers full coverage on the side panels, including above the thumb rest, and extends to the backstrap. There are also two finger wraps designed to fit within the finger grooves under the trigger guard. A logo cutout is included for the Glock emblem on the left side.
These specifications are vital for enhancing handling without sacrificing comfort or concealment. The textured rubber ensures a secure grip, especially crucial in high-stress situations. The precise fit and minimal bulk maintain the firearm’s original ergonomics and concealability. The inclusion of finger wraps further improves grip stability.
Performance & Functionality
The Talon Grips 116R drastically improves handling by providing a more secure and comfortable grip. The textured rubber creates a positive interface between the hand and firearm, reducing slippage, especially during rapid fire.
The grip’s functionality shines in adverse conditions, such as rain or when hands are sweaty. It instills confidence in maintaining a firm hold. While the grip excels in enhancing control, it may not be ideal for users who prefer a completely smooth surface. The Talon Grips 116R meets, and arguably exceeds, expectations for an aftermarket grip enhancement.
Design & Ergonomics
The Talon Grips 116R boasts a low-profile design, adding minimal bulk to the Glock subcompact. The textured rubber provides a comfortable and secure grip, reducing fatigue during extended use.
Installation is simple, thanks to the adhesive backing and precise cut. The grip feels natural in hand, enhancing the overall ergonomics of the firearm. There is virtually no learning curve involved.
Durability & Maintenance
The Talon Grips 116R is constructed from durable rubber that resists wear and tear. After months of use, there are no signs of peeling or significant degradation of the texture.
Maintenance is straightforward, requiring only occasional cleaning with a damp cloth and mild soap. Proper installation and minimal exposure to harsh solvents will extend the grip’s lifespan. The grip’s longevity is promising based on my experience.
Accessories and Customization Options
The Talon Grips 116R does not include any accessories beyond the grip itself. However, it is compatible with most standard Glock holsters designed for Gen4 subcompact models.
There are no additional customization options available directly from Talon Grips for this specific product. Users can still customize their Glock with other aftermarket accessories like sights, triggers, and lights.
Pros and Cons of Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap
Pros
- Significantly enhances grip and control, especially in adverse conditions.
- Low-profile design adds minimal bulk, preserving concealability.
- Easy to install with simple tools and minimal time.
- Durable construction ensures long-lasting performance.
- Provides a comfortable and secure grip for extended use.
Cons
- May require slight adjustment in holster fit due to added texture.
- The texture may be too aggressive for users with sensitive skin.
Who Should Buy Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap?
The Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap is perfect for concealed carriers, law enforcement officers, and anyone seeking improved grip and control of their Glock subcompact pistol. It particularly benefits those who experience slippage due to sweaty hands or adverse weather conditions.
Individuals with very sensitive skin or those who prefer a completely smooth grip surface might find the textured rubber too abrasive. Those looking for a grip that significantly alters the size or shape of the firearm should explore other options. A heat gun is a must-have accessory for proper installation and ensuring a secure bond.
Conclusion on Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap
The Talon Grips 116R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with No Backstrap is an outstanding product that delivers on its promise of improved grip and control. The price of $17.99 is more than justified considering the enhanced handling and confidence it provides.
I would wholeheartedly recommend this grip to anyone looking to upgrade their Glock subcompact. It is a simple, affordable, and effective solution to a common problem. Upgrade your Glock today with the Talon Grips 116R and experience the difference a secure grip can make!