First Thoughts on the Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap
The Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap promises enhanced grip and control for Glock Gen4 pistols. Talon Grips is a well-known name in the firearms accessory world, and I’m always eager to test their products, especially since grip is so crucial for accuracy and handling.
My hands are, shall we say, “experienced,” and the slick polymer frames of Glocks have always presented a challenge, particularly during extended range sessions or in adverse weather. I needed a solution that would provide a more secure and comfortable hold without significantly increasing the firearm’s bulk, particularly for concealed carry.
Upon unboxing, the Talon Grip felt surprisingly thin and lightweight, which is precisely what I was hoping for. The textured black rubber material had a slightly tacky feel, suggesting it would provide a substantial grip without being overly aggressive. Initial impressions were positive regarding the cut and design, which seemed precise and well-thought-out for the specified Glock models.
I considered other grip solutions, such as stippling or aftermarket frames, but the Talon Grips offered a non-permanent, affordable, and relatively simple alternative. Stippling is too permanent, and new frames can be expensive and alter the feel of the Glock too much. This seemed like a perfect middle-ground.
I was initially excited; the promise of improved grip without sacrificing concealability was very appealing. This product seemed to strike a good balance between functionality, comfort, and ease of installation, and I hoped it would live up to the hype.
Real-World Testing: Putting Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap to the Test
First Use Experience
I first tested the Talon Grips at my local outdoor shooting range on a partially overcast day with a slight drizzle. Installation, as per the instructions, involved cleaning the Glock frame thoroughly, positioning the grip, and then using a heat gun to activate the adhesive; it was straightforward and took about 15 minutes. The improved grip was immediately noticeable.
The enhanced grip was particularly beneficial during rapid firing drills, providing better control and reducing muzzle flip. Even with slightly damp hands, the rubber texture maintained a secure hold. There were no initial issues; the grip felt comfortable and did not shift or peel during the first range session.
Extended Use & Reliability
After several weeks of regular use, including multiple range sessions and carrying the Glock concealed, the Talon Grips have held up impressively well. There are no signs of peeling or significant wear, even at the edges.
Cleaning the grip is easy; a simple wipe-down with a slightly damp cloth is usually sufficient. It certainly outperforms the slick, stock Glock frame in both comfort and grip.
Breaking Down the Features of Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap
Specifications
The Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap is an adhesive grip designed for specific Glock Gen4 models without backstraps. The material is textured black rubber, offering a non-slip surface.
The grip provides full coverage on the side panels, including above the thumb rest, ample coverage on the backstrap, and three finger wraps for the finger grooves under the trigger guard. This comprehensive coverage ensures a consistent and secure grip across the entire handle.
Performance & Functionality
The Talon Grip significantly enhances the user’s ability to maintain a firm and consistent grip on the firearm, leading to improved control and accuracy, especially during rapid fire or adverse conditions. Its texture is just right; not too abrasive, but far more grippy than the Glock’s factory grip. The logo cutout is a nice touch, allowing the Glock emblem to remain visible.
The main strength is definitely the enhanced grip, but the ease of installation and non-permanent nature are also excellent. A potential weakness could be long-term durability in extremely harsh conditions, although so far, it’s proven quite resilient. Overall, it exceeds expectations, providing a cost-effective and reliable grip solution.
Design & Ergonomics
The grip is designed to be low-profile, adding minimal bulk to the firearm, which is crucial for concealed carry. The rubber material provides a comfortable and secure feel in hand. It also features strategic coverage areas, ensuring a full and consistent grip surface.
Installation is simple and user-friendly, though a heat gun is recommended for proper adhesion. There is a very minimal learning curve.
Durability & Maintenance
The Talon Grips is constructed from durable rubber that is resistant to wear and tear, ensuring longevity. Regular cleaning with a damp cloth is sufficient to maintain the grip’s performance. Its ability to withstand recoil and environmental factors is notable.
With proper installation, the grip will last for a significant amount of time. The maintenance is simple, requiring minimal effort.
Accessories and Customization Options
The Talon Grips itself does not come with any accessories but is designed to be compatible with standard Glock holsters. Because it’s designed to maintain the original grip profile, most aftermarket accessories will work as intended. It does not, however, work with Gen4 backstraps.
Pros and Cons of Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap
Pros
- Significantly improved grip and control.
- Easy to install and remove without residue.
- Low profile design adds minimal bulk for concealed carry.
- Durable textured rubber provides a comfortable and secure hold.
- Affordable alternative to stippling or aftermarket frames.
Cons
- Requires a heat gun for proper installation.
- Not compatible with Glock Gen4 backstraps.
Who Should Buy Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap?
The Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap is perfect for Glock Gen4 owners who find the stock grip too slick or uncomfortable, particularly those who carry concealed. It’s also ideal for competitive shooters or anyone who wants to improve their control and accuracy.
Those who prefer the modularity of using Glock backstraps should avoid this product. A heat gun is a must-have accessory for proper installation.
Conclusion on Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap
The Talon Grips 110R Adhesive Grip Textured Black Rubber for Glock 19,23,25,32,38,44 Gen4 with No Backstrap offers a cost-effective and practical solution for improving the grip and control of Glock Gen4 pistols. The enhanced grip, ease of installation, and low-profile design make it a worthwhile addition to any Glock owner’s toolkit.
The price is absolutely justified given the improved handling and control it provides. I would definitely recommend it to anyone looking to enhance their Glock’s ergonomics without significant modification. If you’re struggling with the slick factory grip on your Glock, give Talon Grips a try – you won’t be disappointed!