Let’s Talk About Suburban Mfg 391058 Combustion Air Housing Front Half
Let’s face it, RV maintenance isn’t glamorous, but it’s essential. Specifically, keeping your MobileHeat system humming is paramount, especially when that unexpected cold snap hits while you’re miles from civilization. That’s why I decided to take a closer look at the Suburban Mfg 391058 Combustion Air Housing Front Half, a seemingly small part that can make a big difference in your RV’s heating performance.
My own RV heater started acting up last winter. It was spitting and sputtering more than usual, and the airflow was noticeably weaker. A quick inspection revealed a cracked combustion air housing – a common problem, apparently. I needed a solution that was reliable and wouldn’t break the bank.
The Suburban Mfg 391058 Combustion Air Housing Front Half stood out because of Suburban Mfg’s reputation for quality in the RV world. I considered a universal replacement, but after some research, I opted for the Suburban Mfg part to ensure a perfect fit and optimal performance. Initial inspection showed a simple but seemingly robust design.
I was replacing this part because the plastic on my old one had become brittle and cracked due to years of heat and UV exposure. Compared to generic options, this appeared to be a more direct replacement, ensuring less hassle and potentially better performance. My initial impression was cautiously optimistic – this looked like the right part for the job.
Real-World Testing: Putting **Suburban Mfg 391058 Combustion Air Housing Front Half** to the Test
First Use Experience
I installed the Suburban Mfg 391058 Combustion Air Housing Front Half in my RV’s heater in my driveway. Installation was straightforward, requiring only a screwdriver and about 15 minutes of my time. Immediately after installation, I fired up the heater.
The difference was noticeable right away. The heater roared to life with a much stronger and more consistent airflow. There were no issues or surprises after the initial installation and test.
<h3>Extended Use & Reliability</h3>I’ve been using the Suburban Mfg 391058 Combustion Air Housing Front Half for the past six months. The heater has been running flawlessly during camping trips in varying conditions, from cool mountain evenings to damp coastal climates. The new housing shows no signs of wear and tear.
The Suburban Mfg 391058 Combustion Air Housing Front Half is easy to clean; just wipe it down with a damp cloth as needed. Compared to my previous experience with the cracked housing, this has been a massive improvement in heater performance and reliability. This unit far outperforms my expectations considering how inexpensive the part is.
Breaking Down the Features of **Suburban Mfg 391058 Combustion Air Housing Front Half**
Specifications
The Suburban Mfg 391058 Combustion Air Housing Front Half is designed as a direct replacement for the front half of the combustion air housing on specific Suburban MobileHeat RV furnace models. This ensures a proper fit and functionality.
It is made from a durable plastic composite material designed to withstand the heat and vibrations of the RV furnace. The part is lightweight and easy to handle during installation.
The part number is 391058, cross-referencing to 350058. This is important for ensuring you’re ordering the right part for your specific furnace model.
Performance & Functionality
The Suburban Mfg 391058 Combustion Air Housing Front Half drastically improves the performance of the RV furnace. The proper air housing ensures efficient combustion.
It eliminates air leaks and allows the furnace to operate at its optimal BTU output. I would rate the functionality a 10/10 because it directly fixed the original problem I had.
<h3>Design & Ergonomics</h3>The design is simple and functional, focusing on a direct fit and proper airflow. The light weight is barely noticeable.
The part’s design allows for easy installation with minimal tools. Even a novice DIYer can install this.
<h3>Durability & Maintenance</h3>The Suburban Mfg 391058 Combustion Air Housing Front Half is made from durable plastic. It should last for several years under normal operating conditions.
Maintaining this part is simple; regular inspection for cracks or damage is recommended. Periodically cleaning away any debris that may accumulate is also advisable.
<h3>Accessories and Customization Options</h3>The Suburban Mfg 391058 Combustion Air Housing Front Half is not designed for customization. There are no included accessories or modification options.
It’s a direct replacement part designed to restore the original functionality of the RV furnace. Any modifications would likely void any warranty.
Pros and Cons of **Suburban Mfg 391058 Combustion Air Housing Front Half**
Pros
- Direct replacement for specific Suburban MobileHeat furnace models ensuring perfect fit.
- Made from durable plastic composite material that withstands heat and vibration.
- Easy to install with minimal tools, saving time and money on professional repairs.
- Significantly improves RV furnace performance and efficiency.
- Inexpensive solution to restore proper heating in your RV.
Cons
- Only compatible with specific Suburban MobileHeat furnace models. Not a universal part.
- Made of plastic, which can become brittle and crack over time with prolonged exposure to heat.
- Depending on your DIY skills, professional installation may be needed
Who Should Buy **Suburban Mfg 391058 Combustion Air Housing Front Half**?
Perfect for RV owners experiencing reduced airflow or sputtering from their Suburban MobileHeat furnace. It is also great for DIYers comfortable with basic RV maintenance.
Anyone with a cracked or damaged combustion air housing looking for a cost-effective repair solution should consider this. If you’re not sure which model you have, this might not be for you.
Skip this product if you don’t have a compatible Suburban MobileHeat furnace model or if you prefer professional RV repairs.
A tube of high-temperature silicone sealant can be useful for ensuring an airtight seal around the housing. A basic screwdriver set is also essential for installation.
Conclusion on **Suburban Mfg 391058 Combustion Air Housing Front Half**
Overall, the Suburban Mfg 391058 Combustion Air Housing Front Half is a fantastic value for the money. It’s a simple yet effective solution to restore the performance of your RV’s heating system.
The low price point is definitely justified considering the improved efficiency and reliability it provides. I would absolutely recommend this product to any RV owner experiencing issues with their Suburban MobileHeat furnace.
Don’t let a cracked air housing leave you shivering on your next adventure. Get the Suburban Mfg 391058 Combustion Air Housing Front Half and keep your RV warm and cozy!