Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline Review

Let’s Dive into Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline

The Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline isn’t just a propeller; it’s a promise of enhanced performance and reliability on the water. Manufactured by Solas, known for their precision-engineered propellers, this particular model boasts a 13.25-inch diameter, a 17-inch pitch, and a 15-tooth spline. This combination aims to deliver outstanding acceleration and top speed, all while maintaining durability. It’s a critical component for any boater looking to maximize their vessel’s potential.

My own journey to finding the Solas Amita 3 started with a persistent issue: my boat felt sluggish, especially when loaded with gear for fishing trips. The old prop just wasn’t cutting it anymore. I craved better fuel efficiency and a quicker response when throttling up.

Upon unboxing, the Solas Amita 3 immediately impressed me with its solid construction and clean finish. The aluminum felt robust, and the four-layer paint job gave it a professional, almost marine-grade look. It had a reassuring weight, suggesting quality materials.

Compared to a few other props I considered, like the Michigan Wheel Apollo and the Turning Point Hustler, the Solas Amita 3 stood out due to its balanced specifications and the reputation of Solas for consistent manufacturing. I was looking for reliability and a noticeable performance boost, and I felt the Solas offered the best chance of achieving that without breaking the bank. Initial excitement was high, fueled by the hope of transforming my boat’s performance.


Real-World Testing: Putting Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline to the Test

First Use Experience

My first outing with the Solas Amita 3 was on Lake Seminole, a large reservoir known for its diverse fishing environments. I tested it under varying conditions, from calm waters to choppy sections stirred up by afternoon winds. Right away, the difference was noticeable.

The boat planed much faster. It was like adding a turbocharger to my outboard. Even with my usual fishing gear and a buddy on board, the acceleration was significantly improved.

The Solas Amita 3 handled the choppy water surprisingly well, maintaining a steady grip and preventing excessive cavitation. There were no alarming vibrations or unusual noises, just smooth, consistent power delivery. This was a big win.

Extended Use & Reliability

After several months of regular use, the Solas Amita 3 has proven its worth time and again. I’ve taken it through everything from leisurely cruises to more demanding fishing expeditions, and it has consistently delivered. The aluminum shows minimal signs of wear, despite the occasional accidental bump against submerged logs.

Cleaning is straightforward; a quick rinse with fresh water after each use keeps it looking like new. There is no special treatment required. The paint has held up exceptionally well, with no peeling or fading.

Compared to my previous prop, a cheaper no-name brand, the Solas Amita 3 is in a different league. The difference in performance is undeniable, and the peace of mind knowing I have a reliable prop is worth the investment. It definitely outperforms its predecessor.

Breaking Down the Features of Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline

Specifications

  • The Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline features a 13.25-inch diameter. This diameter helps provide a good balance between acceleration and top-end speed.
  • It also has a 17-inch pitch, which determines how far the boat moves forward with each revolution. A 17-inch pitch suggests it is optimized for boats needing good cruising speed while maintaining solid hole shot.
  • The propeller uses a 15-tooth spline to connect to the motor shaft. This is a common size, ensuring compatibility with a wide range of outboards.
  • Constructed from squeeze-cast aluminum, it balances durability and affordability. The casting process ensures that the metal is dense and free from imperfections.
  • The right-hand rotation is standard for most single-engine boats. The propeller is designed to rotate clockwise when viewed from behind the boat.
  • Finally, it has a three-blade design, which is a good compromise between speed, thrust, and fuel efficiency. Three blades offer a balance that works well for many applications.

Performance & Functionality

The Solas Amita 3 excels in delivering a noticeable performance boost. Acceleration is significantly improved, allowing boats to get on plane faster. Top speed is also enhanced, allowing for quicker transits between fishing spots.

The prop’s design offers a good balance of thrust and efficiency. This makes it suitable for various boating activities. It meets, and in some areas, exceeds expectations.

However, it’s not a magic bullet. Extremely heavy loads might still require a slightly lower pitch prop. This is a minor weakness.

Design & Ergonomics

The Solas Amita 3’s build quality is excellent. The aluminum feels strong, and the four-layer paint coating provides robust protection against corrosion. The weight feels appropriate for its size, contributing to the overall feeling of quality.

The design is user-friendly and straightforward to install. It usually only requires basic tools and knowledge, with no complex installation procedures. There is practically no learning curve.

Durability & Maintenance

The Solas Amita 3 is designed for longevity. With proper care, it should last for many seasons of boating. The aluminum construction is resilient against minor impacts, and the paint helps prevent corrosion.

Maintenance is simple: rinsing after use and occasional inspection for damage. It’s easy to maintain and repair with basic tools. This ensures its continued performance.

Accessories and Customization Options

The Solas Amita 3 doesn’t come with many accessories in the box, typically just the prop itself and basic installation instructions. Customization is generally limited to choosing the correct size and pitch for your boat.

However, it is compatible with aftermarket prop wrenches and installation kits. There are also various prop protectors available that can be used to further extend its lifespan. These protect against impacts with underwater obstacles.

Pros and Cons of Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline

Pros

  • Improved Acceleration: Boats get on plane significantly faster, enhancing overall performance.
  • Enhanced Top Speed: Allows for quicker transits between locations, saving time on the water.
  • Durable Construction: Squeeze-cast aluminum and four-layer paint provide long-lasting protection.
  • Easy Installation: Simple to install with basic tools and knowledge.
  • Cost-Effective: Offers a good balance of performance and price, making it an excellent value.

Cons

  • Pitch Limitations: May not be ideal for extremely heavy loads, potentially requiring a different pitch.
  • Aluminum Material: While durable, aluminum is more susceptible to damage than stainless steel in severe impacts.


Who Should Buy Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline?

The Solas Amita 3 is perfect for recreational boaters, anglers, and weekend warriors looking to improve their boat’s performance without breaking the bank. It’s also a great option for those who need a reliable, durable propeller that can handle a variety of conditions. This is also a solid choice for people who are using their boat for watersports like skiing, wakeboarding, and tubing.

This prop might not be the best choice for professional anglers who require maximum performance and durability in extreme conditions. Also, those operating very large or heavily loaded boats might benefit from a different propeller type or pitch.

A must-have accessory would be a good quality prop wrench for easy installation and removal. Also, consider investing in a prop protector to guard against damage from underwater obstacles.

Conclusion on Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline

The Solas Amita 3 Aluminum 3 Blade Prop Rh 13.25″ Dia. x 17″ Pitch x 15 Spline is an outstanding propeller that delivers on its promise of improved performance and reliability. The enhanced acceleration and top speed are immediately noticeable, making it a worthwhile upgrade for any boater.

The price is more than justified by the quality of construction and the tangible improvement in boat handling. It strikes the right balance between cost and performance.

I wholeheartedly recommend the Solas Amita 3. If you’re looking to breathe new life into your boat and enhance your overall boating experience, this propeller is a game-changer. Upgrade your ride today and experience the difference!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top