Let’s Talk About Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen
The Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen isn’t just another aftermarket slide; it’s a statement. It’s a declaration that you demand more from your Glock 17 – more precision, more adaptability, and more ruggedness. Crafted by Rival Arms, this slide boasts a Docter/Noblex optic cut, enhanced serrations, and robust stainless-steel construction.
I’ve been a Glock aficionado for years, appreciating their reliability but always feeling limited by the factory slide’s optic options. I needed a solution that allowed me to mount my preferred red dot sight securely without sacrificing the pistol’s inherent balance and feel. The Rival Arms slide promised exactly that.
Upon unboxing, the first thing that struck me was the Rival Arms slide’s substantial feel. The 17-4PH stainless steel billet construction immediately exudes quality, and the black QPQ finish is flawless. Compared to a standard Glock slide, the Rival Arms slide feels denser, more refined. I had considered slides from ZEV Technologies and Brownells, but the Rival Arms offering stood out for its combination of value and features.
My initial impression was one of excited anticipation. This wasn’t just an upgrade; it felt like a transformation. I knew right then that the Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen could elevate my Glock 17 to a whole new level.
Real-World Testing: Putting Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen to the Test
First Use Experience
I tested the Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen at my local shooting range, a mix of indoor bays and outdoor setups. I subjected it to various drills – rapid-fire, slow-fire, and target transitions – under bright sunlight and dimly lit indoor conditions. Mounting my Docter red dot sight was straightforward, thanks to the precise optic cut.
The slide performed flawlessly, cycling smoothly and consistently with various ammunition types. The enhanced front and rear serrations proved invaluable for manipulating the slide, especially when my hands were sweaty. There were zero malfunctions during the initial 200-round session, an immediate confidence booster.
Extended Use & Reliability
After several months of consistent use, the Rival Arms slide continues to impress. I’ve put over 1000 rounds through it, including a weekend training course in dusty conditions. The QPQ finish shows no signs of wear, and the slide still cycles as smoothly as day one.
Cleaning the slide is a breeze. A quick wipe down with CLP and a brush keeps it running smoothly. Compared to my experience with other aftermarket parts, the Rival Arms slide has exceeded expectations in terms of durability and reliability.
Breaking Down the Features of Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen
Specifications
Manufacturer: Rival Arms. They are known for quality aftermarket parts.
Optic Cut: Docter/Noblex. This allows direct mounting of popular red dot sights without adapter plates, contributing to a lower profile and improved co-witnessing.
Finish: Black. The durable QPQ thermo-chemical case hardening provides excellent corrosion resistance and a sleek appearance.
Fabric/Material: 17-4 Stainless Steel. This is a high-strength, corrosion-resistant alloy ideal for firearm components, ensuring long-term durability.
Condition: New. The product arrives in pristine condition, ready for installation.
Country of Origin: USA. This signifies high manufacturing standards and quality control.
Performance & Functionality
The Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen performs exceptionally well. Its accuracy is on par with, if not slightly better than, the factory slide. Reliability has been 100% in my experience, and the enhanced serrations make slide manipulation easier and faster.
The only minor weakness I’ve found is that the slide is slightly heavier than the factory slide, which could slightly alter the pistol’s balance for some users, but I personally prefer the added weight. Overall, the Rival Arms slide meets and exceeds my expectations in terms of performance and functionality.
Design & Ergonomics
The build quality is superb, with tight tolerances and a flawless finish. The 17-4 stainless steel feels solid and robust. The slide is comfortable to manipulate, and the serrations provide a secure grip even with wet hands.
There’s virtually no learning curve. Installation is straightforward, and the slide functions just like the factory slide, only better.
Durability & Maintenance
The Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen is built to last. The stainless-steel construction and QPQ finish offer excellent resistance to wear and corrosion. Regular cleaning and lubrication are all that’s needed to keep it running smoothly.
The slide is also easy to disassemble for maintenance. The firing pin channel and other internal components are readily accessible.
Accessories and Customization Options
The Rival Arms slide is primarily designed for mounting a Docter/Noblex footprint optic. Beyond that, it’s compatible with standard Glock 17 Gen 1-4 internal components. The ability to easily add a red dot sight transforms the pistol’s capabilities.
It’s worth noting that the slide is not compatible with Gen 5 Glocks. Users will also need to ensure they have compatible height sights for co-witnessing with their chosen optic.
Pros and Cons of Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen
Pros
- Enhanced Accuracy: The precision machining provides a tighter fit with the barrel, potentially improving accuracy.
- Durable Construction: Built from high-quality 17-4 stainless steel with a QPQ finish for long-lasting performance.
- Optic Ready: Direct mounting of Docter/Noblex optics provides a lower profile and improved co-witnessing.
- Improved Grip: Enhanced front and rear serrations offer superior slide manipulation, even in adverse conditions.
- Made in the USA: Ensures high manufacturing standards and quality control.
Cons
- Slightly Heavier: The added weight might alter the balance of the pistol for some users.
- Limited Optic Compatibility: Only compatible with Docter/Noblex footprint optics.
Who Should Buy Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen?
The Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen is perfect for competitive shooters looking to enhance their Glock 17’s performance and accuracy. It’s also ideal for tactical users who want to add a red dot sight for improved target acquisition in dynamic situations. Firearm enthusiasts who appreciate high-quality components and customization options will also find this slide appealing.
Those who are on a tight budget might want to explore more affordable options. Glock owners who prefer other optic footprints will need to look for slides with different cuts.
A must-have modification would be suppressor height sights.
Conclusion on Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen
The Rival Arms RA10G106A Precision Slide Doc Optic Cut Compatible With Glock 17 Gen is a top-tier aftermarket slide that delivers on its promises. It offers enhanced accuracy, durability, and the ability to easily mount a Docter/Noblex optic. The price is justified given the quality of materials, precision machining, and performance benefits.
I would wholeheartedly recommend this slide to anyone looking to upgrade their Glock 17 Gen 1-4. It’s a worthwhile investment that will elevate your shooting experience. Transform your Glock today – you won’t regret it!