First Thoughts on the RIMFIRE RINGS 1″ HIGH Black DVTL
For any rimfire enthusiast, a reliable set of rings is paramount. After years of struggling with subpar mounting solutions that shifted zero after every other range trip, I decided it was time for an upgrade. The RIMFIRE RINGS 1″ HIGH Black DVTL from Burris immediately caught my eye due to their reputation for quality and their compatibility with the common .22 dovetail receiver.
I was tired of cheap rings that wouldn’t hold zero on my favorite .22LR rifle. I needed something dependable, something that could withstand the minor recoil and vibrations without constantly needing adjustments. Seeing that Burris offered a Forever Warranty, I knew these rings had to be durable and worth the price.
Upon unboxing, I was impressed with the solid feel and clean black finish. The rings felt substantial, inspiring confidence that they could withstand regular use. They had a nice weight to them, indicating high quality materials, not some flimsy, pot-metal construction that I’d encountered before.
I considered rings from Leupold and Weaver, but the Burris rings’ reversible clamp design, fitting both .22 grooved receivers and 11mm dovetails, sealed the deal. This versatility meant they could potentially be used on multiple rifles in my collection. My initial reaction was excitement; I was eager to see if they lived up to the Burris reputation.
Real-World Testing: Putting RIMFIRE RINGS 1″ HIGH Black DVTL to the Test
First Use Experience
My first outing with the RIMFIRE RINGS 1″ HIGH Black DVTL was at my local shooting range. I mounted them on my Ruger 10/22, pairing them with a 1-inch tube rimfire scope that had been gathering dust due to my previous rings failing to keep it in place. The mounting process was straightforward, and the rings clamped securely onto the dovetail rail.
The weather was slightly damp, but that didn’t affect the installation or performance. Initial groups at 50 yards were noticeably tighter than I’d ever achieved with my old setup. The rings felt solid during shooting, with no visible movement or loosening.
I noticed I didn’t need to constantly check the screws for tightness. It was a welcome change after repeatedly tightening my old rings after almost every magazine.
Extended Use & Reliability
After several months of consistent use, the RIMFIRE RINGS 1″ HIGH Black DVTL have proven to be incredibly reliable. I have put over 1000 rounds through my Ruger 10/22 since installing them, and the zero has remained rock solid. There is no sign of wear and tear on the rings themselves.
I’ve taken the rifle on several small game hunts in varying weather conditions. The rings have performed flawlessly, even after being exposed to rain and dirt. Cleaning is simple; a quick wipe down with a cloth is all that’s needed to keep them in top condition.
These rings significantly outperform the previous rings I used. My previous rings were constantly shifting, leading to frustrating inaccuracies. The RIMFIRE RINGS 1″ HIGH Black DVTL provide a consistent and reliable platform for my optic.
Breaking Down the Features of RIMFIRE RINGS 1″ HIGH Black DVTL
Specifications
The RIMFIRE RINGS 1″ HIGH Black DVTL are designed specifically for rimfire and airgun optics with a 1-inch tube diameter. They are available in either solid steel or aluminum, offering a choice between maximum durability and lightweight mounting. These rings are designed to fit .22 grooved receivers, with reversible clamps to accommodate 11mm dovetails, offering a versatile mounting solution. The black finish provides a sleek and professional look.
These specifications are crucial for ensuring a secure and accurate mounting platform for a rimfire optic. The 1-inch diameter is standard for many rimfire scopes, while the dovetail compatibility ensures they can be mounted on a wide range of rifles. The choice between steel and aluminum allows users to balance weight and ruggedness based on their specific needs.
Performance & Functionality
The RIMFIRE RINGS 1″ HIGH Black DVTL excel in their primary function: providing a stable and repeatable mounting platform for optics. Their strong gripping power ensures the scope remains securely in place, even under recoil. The rings maintain zero consistently, enhancing accuracy and confidence in the field.
The main strength of these rings is their rock-solid stability. There is no detectable movement or loosening during shooting, leading to consistent accuracy. One potential weakness could be the aluminum version might not be as resistant to scratches as steel, but the weight savings may be worth it for some users.
They absolutely exceed my expectations. They deliver a level of reliability and stability that I haven’t experienced with other rimfire rings in this price range.
Design & Ergonomics
The RIMFIRE RINGS 1″ HIGH Black DVTL boast a simple and functional design. The rings are well-machined, with a clean black finish that resists corrosion. The 1-inch height provides adequate clearance for most rimfire scopes, while still maintaining a low profile.
The rings are lightweight (especially the aluminum versions), minimizing added weight to the rifle. The user-friendly design makes installation straightforward, even for those with limited experience.
Durability & Maintenance
The Burris RIMFIRE RINGS 1″ HIGH Black DVTL are built to last. The materials used, whether steel or aluminum, are high-quality and resistant to wear and tear. They are easy to maintain; a simple wipe down with a clean cloth after each use is typically sufficient.
With proper care, these rings should provide years of reliable service. The Burris Forever Warranty provides additional peace of mind, guaranteeing against defects in materials and workmanship.
Accessories and Customization Options
The RIMFIRE RINGS 1″ HIGH Black DVTL do not come with any additional accessories beyond the rings themselves and the necessary mounting hardware. However, they are compatible with a wide range of 1-inch tube rimfire scopes from various brands. Users can choose from a vast selection of optics to pair with these rings, customizing their setup to suit their specific needs and preferences.
The primary customization option is the choice of scope to mount. The RIMFIRE RINGS 1″ HIGH Black DVTL provide a solid base for any 1-inch tube optic, from basic plinking scopes to high-end target optics.
Pros and Cons of RIMFIRE RINGS 1″ HIGH Black DVTL
Pros
- Solid and Reliable Mounting Platform: Provides a stable base for optics, ensuring consistent accuracy.
- Durable Construction: Made from high-quality materials, ensuring long-lasting performance.
- Versatile Compatibility: Fits both .22 grooved receivers and 11mm dovetails with reversible clamps.
- Easy Installation: Straightforward mounting process, even for beginners.
- Burris Forever Warranty: Offers peace of mind, guaranteeing against defects in materials and workmanship.
Cons
- Aluminum version may be more prone to cosmetic scratches compared to steel.
- Some may prefer a quick-detach system for easier scope swapping, which these lack.
Who Should Buy RIMFIRE RINGS 1″ HIGH Black DVTL?
The RIMFIRE RINGS 1″ HIGH Black DVTL are perfect for rimfire enthusiasts, plinkers, small game hunters, and target shooters. Anyone who wants a dependable and accurate mounting solution for their 1-inch tube rimfire scope will benefit from these rings. These are great for those who need a set of rings that can be quickly swapped between rimfire rifles utilizing either the standard .22 dovetail or 11mm dovetails.
Those who require a quick-detach system for frequently swapping optics should skip this product. Similarly, if you are using a scope with a tube diameter other than 1 inch, these rings will not be compatible.
A torque wrench to ensure proper screw tightening is a must-have accessory. Also, a high-quality rimfire scope to take full advantage of the stable mounting platform is recommended.
Conclusion on RIMFIRE RINGS 1″ HIGH Black DVTL
The RIMFIRE RINGS 1″ HIGH Black DVTL are an excellent choice for anyone seeking a reliable and durable mounting solution for their rimfire optics. The rings deliver on their promise of providing a stable and accurate platform, enhancing the overall shooting experience. The price of $33.99 is more than justified given the quality of materials, construction, and the peace of mind offered by the Burris Forever Warranty.
I would absolutely recommend the RIMFIRE RINGS 1″ HIGH Black DVTL to any rimfire shooter looking for a dependable set of rings. They are a worthwhile investment that will improve accuracy and consistency in the field or at the range. Upgrade your rimfire setup today and experience the difference a quality set of rings can make!