NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- Review

First Thoughts on the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-

Mechanical broadheads often get a bad rap. Some claim they’re less reliable than fixed blades, prone to premature opening, or simply not as devastating. However, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- aims to shatter those preconceptions. New Archery Products (NAP) has been a dominant force in the archery world for decades, and the Spitfire line is legendary. I’m eager to see if this “cut on contact” version lives up to the hype.

For years, I stubbornly stuck to fixed-blade broadheads, believing in their inherent simplicity and durability. However, the allure of a wider cutting diameter and potentially greater forgiveness on less-than-perfect shots has always lingered. I also wanted something that flew closer to my field points. The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- promised both, so I decided to give mechanicals another shot.

Upon unboxing, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- broadheads exuded quality. The blades were razor sharp, the construction felt robust, and the “cut on contact” tip looked aggressively effective. The ferrule is sleek and aerodynamic.

I considered the Rage Hypodermic and the Grim Reaper Whitetail Special before settling on the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-. I liked the Spitfire’s reputation for consistent deployment and its slightly smaller cutting diameter (1 3/4″) compared to the others, figuring it would be a better balance of penetration and wound channel.

My initial impression was excitement tempered with cautious optimism. I’ve been burned by mechanical broadheads before, but something about the design and the NAP reputation gave me hope that the SPITFIRE MAXX would be different. Let’s see how these broadheads perform in the field.

Real-World Testing: Putting NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- to the Test

First Use Experience

My first test of the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- was at my local archery range. I shot into a block target from 20, 30, and 40 yards.

The broadheads flew remarkably similar to my field points, requiring only minimal sight adjustment at 40 yards. Deployment was consistent, leaving clean entry and exit holes in the target. No blades opened prematurely during flight. I even took a few shots in a light rain shower. The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- continued to perform reliably, showing no signs of being affected by the moisture.

Extended Use & Reliability

After several weeks of practice and tuning, I felt confident enough to take the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- into the deer woods. I shot about 20 more times at the range, making adjustments to my bow.

After a few months of use, these broadheads held up surprisingly well. The blades remained sharp, and the deployment mechanism continued to function flawlessly. The ferrules showed minor scratches from target practice, but no significant damage. I found that cleaning the broadheads after each practice session and applying a light coat of oil helped to maintain their performance.

Compared to my previous experiences with other mechanical broadheads that often suffered from bent blades or inconsistent deployment, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- has been a clear improvement. These broadheads instilled confidence.

Breaking Down the Features of NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-

Specifications

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- boasts several key specifications. It features a 100-grain weight, designed for optimal arrow flight and kinetic energy transfer. The cutting diameter is 1 3/4 inches, providing a substantial wound channel for quick and humane kills. Its cut-on-contact tip ensures immediate penetration upon impact. The broadhead employs three .030″ thick blades, constructed from high-quality stainless steel for durability and sharpness.

These specifications are crucial for broadhead performance. The 100-grain weight is a common standard, working well with a variety of arrow setups. The wider cutting diameter translates to increased blood loss and a higher probability of a fatal wound. The cut-on-contact design bypasses the “energy loss” associated with some other broadhead designs.

Performance & Functionality

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- excels in both accuracy and penetration. The broadheads fly nearly identically to field points when properly tuned to your bow, minimizing the need for significant sight adjustments. This consistency is critical for confident shot placement in hunting situations.

The design’s strength lies in its reliable deployment and impressive cutting ability. The blades consistently open upon impact, creating a massive wound channel that promotes rapid blood loss. A potential weakness could be blade durability if hitting bone, but I haven’t personally experienced that. Overall, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- meets and often exceeds expectations for a mechanical broadhead.

Design & Ergonomics

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- features a sleek, aerodynamic design. The broadhead’s weight is well-balanced, contributing to stable arrow flight. Its construction feels solid, inspiring confidence in its ability to withstand the rigors of hunting.

The broadhead is relatively easy to use. The design is intuitive, and blade replacement is straightforward. There is no real learning curve beyond basic broadhead tuning.

Durability & Maintenance

With proper care, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- can last for multiple seasons. The stainless-steel blades are resistant to corrosion, and the ferrule is made from a durable aluminum alloy.

Maintenance is simple. After each use, clean the broadhead with warm, soapy water, dry it thoroughly, and apply a light coat of oil to the blades and ferrule. Replace the blades as needed to maintain optimal sharpness.

Accessories and Customization Options

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- doesn’t require many accessories, but replacement blades are essential for continued use. NAP offers replacement blade packs specifically designed for the SPITFIRE MAXX.

There are no significant customization options for this broadhead. However, its compatibility with standard arrow inserts allows for fine-tuning of overall arrow weight and front-of-center (FOC) balance.

Pros and Cons of NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-

Check Best Price HERE

Who Should Buy NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-?

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- is perfect for hunters seeking a combination of accuracy, penetration, and a large wound channel. This broadhead is a great choice for whitetail hunters, especially those hunting from treestands or ground blinds where shot angles can be less than ideal.

Hunters who prioritize absolute maximum penetration at all costs might prefer a fixed-blade broadhead. Also, hunters on a very tight budget might find the cost of mechanical broadheads and replacement blades prohibitive.

A broadhead target is a must-have accessory for practicing with the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-.

Conclusion on NAP SPITFIRE MAXX 100 CUT ON CONTACT 3-

The NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- has earned a spot in my quiver. It offers exceptional accuracy, reliable performance, and creates devastating wound channels.

At a price of $31.49, the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- offers excellent value for the performance it delivers.

I wholeheartedly recommend the NAP SPITFIRE MAXX 100 CUT ON CONTACT 3- to any hunter looking for a high-quality mechanical broadhead that delivers consistent results. Give them a try, and experience the difference for yourself!

Check Best Price HERE