The Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides Made a Bold First Impression
As an outdoor and tactical gear specialist, I’ve seen countless targets come and go. I’ve personally spent hours upon hours at the range, training new shooters, and coaching seasoned archers. When the Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides arrived, I was immediately intrigued by its simplicity and targeted purpose: restoring life to a well-used target.
My old Morrell NASP Eternity target had seen better days. Its original cover was riddled with holes, sun-faded, and barely holding its own. Rather than investing in a brand-new target, the promise of a cost-effective replacement cover was appealing. This Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides offers a practical solution, and I was eager to see if it lived up to the hype.
Unboxing the cover revealed a durable-looking material. The vibrant target faces printed on both sides instantly breathed life into the package. My initial impression was positive; the material felt robust enough to withstand repeated arrow impacts, and the printing was clear and precise.
I considered a few other options before settling on the Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides. Some generic covers were cheaper, but lacked the official NASP target face and durability. Others were more expensive complete targets. The Morrell replacement offered the best balance of cost, quality, and specific suitability for my existing target. I was cautiously optimistic that this would be a significant upgrade.
Real-World Testing: Putting Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides to the Test
First Use Experience
My first test was at my local archery range. It’s a pretty standard outdoor setup, exposed to the elements and frequented by archers of all skill levels. Replacing the old cover was straightforward. It involved some wrestling with the existing fill, but the new cover slipped on without too much difficulty.
The weather was slightly damp, with a light drizzle. Despite the moisture, the cover held up well, showing no signs of fading or water damage. My arrows penetrated the target cleanly, and the cover showed no immediate signs of tearing or ripping. The Morrell Replacement Bag Target Cover performed as expected.
The most noticeable difference was the clarity of the target face. After countless shots on a faded and ripped target, the fresh, vibrant rings offered a much-improved shooting experience. The ease of target acquisition and the visual feedback from each shot were greatly enhanced.
Extended Use & Reliability
After several weeks of consistent use, the Morrell Replacement Bag Target Cover is holding up remarkably well. There are some signs of wear and tear, naturally. However, the material remains resilient, and the target faces are still clear and easy to read.
I’ve been diligent about rotating the target to distribute wear evenly. This seems to be extending the cover’s lifespan. Cleaning is simple; I just wipe it down with a damp cloth to remove dirt and grass stains.
Compared to my previous experience with the dilapidated original cover, this is a significant improvement. The Morrell Replacement Bag Target Cover has not disappointed. I would even say it exceeded my initial expectations. It has given my aging target a new lease on life.
Breaking Down the Features of Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides
Specifications
The Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides is designed specifically for the Morrell NASP Eternity target. It measures 32″x12″x32″, providing a snug and secure fit.
It is intended for field point use only, which is standard for bag targets. The cover features printed NASP 80cm target faces on both sides. This allows for extended use and target variety.
The key specification is its compatibility with the Morrell NASP Eternity target. This ensures a perfect fit and optimal performance. The double-sided design effectively doubles the lifespan of the target face.
Performance & Functionality
The Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides performs admirably in its primary role: providing a durable and visible target face. Arrows penetrate cleanly and are easy to remove. The target face is clear and precise, enhancing the shooting experience.
Its strength lies in its simplicity and direct replacement functionality. There are no unnecessary bells and whistles. Its weakness is, inherently, that it’s only a cover, not a complete target.
It meets expectations. The cover has proven to be a worthy investment. My old target is usable again.
Design & Ergonomics
The Morrell Replacement Bag Target Cover boasts a straightforward and functional design. The material feels durable and capable of withstanding repeated arrow impacts. Its lightweight construction doesn’t add significant weight to the target itself.
The cover is user-friendly and easy to install. The snug fit ensures it stays in place during use. There is minimal learning curve involved.
Durability & Maintenance
The cover is showing signs of wear and tear after weeks of use. However, it still offers adequate protection. Regular cleaning with a damp cloth is sufficient for maintenance.
Longevity is directly proportional to usage frequency and arrow impact force. With proper care, the cover should last a reasonably long time. Repair is not really an option. However, the double-sided design inherently offers extended use.
Accessories and Customization Options
No accessories come with the Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides. There are no customization options beyond simply replacing the cover. It’s a straightforward replacement part designed for a specific purpose.
The product relies on the existing fill material of the original target. It doesn’t require any additional accessories for operation.
Pros and Cons of Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides
Pros
- Cost-effective solution for extending the life of an existing Morrell NASP Eternity target.
- Durable material that withstands repeated arrow impacts.
- Double-sided target faces for extended use and target variety.
- Easy to install and maintain.
- Clear and precise target face enhances the shooting experience.
Cons
- Only a replacement cover. Requires an existing Morrell NASP Eternity target with adequate fill material.
- Field point use only. Not suitable for broadheads.
Who Should Buy Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides?
The Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides is perfect for archery programs, NASP participants, recreational archers, and coaches. Anyone who already owns a Morrell NASP Eternity target and wants to extend its lifespan without buying a completely new target will find this product invaluable.
Individuals looking for a complete target solution or broadhead compatibility should skip this product. Also, those whose existing Morrell NASP Eternity target has severely degraded fill material will need to consider a new target entirely.
A must-have modification would be heavy-duty tape to repair rips. You could also consider purchasing extra fill material if your original target has lost significant volume.
Conclusion on Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides
The Morrell Replacement Bag Target Cover NASP 80cm Face Both Sides is a practical and economical solution for extending the life of a well-used target. For $28.49, you get a durable, double-sided replacement cover that restores the clarity and functionality of your existing Morrell NASP Eternity target. The price is definitely justified.
I would personally recommend this product to anyone looking for a cost-effective way to breathe new life into their old target. It’s a simple, yet effective upgrade that will enhance your shooting experience. Don’t let a worn-out target diminish your practice. Invest in a Morrell Replacement Bag Target Cover and keep your arrows flying true!