Let’s Dive into Mec Gunsmith And Reloading Equipment 29
The Mec Gunsmith And Reloading Equipment 29, specifically the #29 powder bushing, is a seemingly small but crucial component for anyone serious about reloading shotgun shells. Manufactured by MEC, a trusted name in reloading equipment, this bushing helps to accurately dispense powder charges, ensuring consistent and reliable loads. It’s a simple piece of aluminum, but its precision is paramount for safe and effective reloading.
My foray into reloading began as a quest for greater control over my shotgun shell performance for sporting clays. I was tired of inconsistent factory loads and wanted to tailor my shells to my specific needs, which led me down the path of powder bushings.
Upon receiving the Mec Gunsmith And Reloading Equipment 29, I immediately noted its simple, robust design. The aluminum felt solid, with clean machining and a smooth finish. Compared to some cheaper, generic bushings I’ve encountered, this one felt significantly more precise.
I considered using adjustable powder measures, but I value the simplicity and repeatability of MEC bushings for high-volume reloading. The Mec Gunsmith And Reloading Equipment 29 seemed to offer the best balance of accuracy and ease of use for my needs. I was eager to get it into my MEC reloader and start producing consistent shotshells.
Real-World Testing: Putting Mec Gunsmith And Reloading Equipment 29 to the Test
First Use Experience
My first testing ground for the Mec Gunsmith And Reloading Equipment 29 was my reloading bench, where I load shells for sporting clays. I primarily use Hodgdon Clays powder, and this bushing was supposedly a good starting point for a 1 1/8 oz load. The conditions were typical for my basement setup: controlled temperature and humidity.
The Mec Gunsmith And Reloading Equipment 29 proved very straightforward to install and use. It dropped consistently, with very little variation in powder weight. Initial tests showed a slight deviation from the target weight with my powder, requiring a slight adjustment in my overall recipe.
After the first use, I was impressed with the consistency, but was slightly concerned about the need to fine-tune my powder recipe for maximum accuracy.
Extended Use & Reliability
After several months of reloading thousands of shells using the Mec Gunsmith And Reloading Equipment 29, I can confidently say it’s a reliable workhorse. The bushing shows no signs of wear and tear, maintaining its precision even after extensive use. Cleaning is simple: a quick wipe with a dry cloth is usually sufficient.
Compared to my previous experiences with adjustable powder measures that require constant tinkering, the Mec Gunsmith And Reloading Equipment 29 offers a significantly more streamlined and reliable experience. It consistently delivers accurate powder drops, leading to more consistent and predictable shell performance. I’m pleased with the performance.
Breaking Down the Features of Mec Gunsmith And Reloading Equipment 29
Specifications
The Mec Gunsmith And Reloading Equipment 29 is a powder bushing designed for use with MEC reloading presses. It is constructed of aluminum, providing a lightweight yet durable component for consistent powder dispensing. The bushing is designed for use with shotgun reloading.
The key specification is its internal diameter, which dictates the volume of powder dispensed. This affects the velocity and pressure of the resulting shotshell.
Performance & Functionality
The Mec Gunsmith And Reloading Equipment 29 performs its primary function – dispensing powder – extremely well. It is reliable and consistent, leading to accurate loads. Its strength is its simplicity; no moving parts mean less opportunity for failure.
A minor weakness is that achieving precise powder weights often requires experimentation with different powder types or bushing sizes. It meets my expectations for a simple, reliable powder dispensing solution.
Design & Ergonomics
The Mec Gunsmith And Reloading Equipment 29 is a very simple design. It’s machined from aluminum and has a smooth, consistent finish. Its lightweight nature is beneficial.
It is extremely user-friendly and requires absolutely no learning curve. Just drop it in your reloader.
Durability & Maintenance
Given its aluminum construction and lack of moving parts, the Mec Gunsmith And Reloading Equipment 29 is expected to last for many years of use. Maintenance is almost non-existent: simply keep it clean and free of debris. The design is simple enough to prevent any required repairs.
Accessories and Customization Options
The Mec Gunsmith And Reloading Equipment 29 itself doesn’t have accessories. Its customization lies in selecting the correct bushing size for a specific powder and load. MEC offers a wide range of bushings to accommodate different powders and load recipes. It is compatible with all MEC reloading presses that use interchangeable powder bushings.
Pros and Cons of Mec Gunsmith And Reloading Equipment 29
Pros
- Simple and reliable design reduces the chance of malfunctions.
- Consistent powder drops lead to predictable shell performance.
- Durable aluminum construction ensures long-lasting use.
- Affordable price point makes it accessible to all reloaders.
- Easy to install and use requires no prior experience.
Cons
- Fine-tuning powder weights may require experimentation.
- It can only be used with compatible MEC reloaders.
Who Should Buy Mec Gunsmith And Reloading Equipment 29?
Perfect for shotgun reloaders who value consistency and simplicity. It is great for sporting clays enthusiasts, bird hunters, and anyone seeking accurate and reliable shotshells.
People who need extreme precision or require on-the-fly powder adjustments should skip this product and consider an adjustable powder measure. You might want a powder scale, and a good reloading manual is a must.
Conclusion on Mec Gunsmith And Reloading Equipment 29
The Mec Gunsmith And Reloading Equipment 29 (specifically the #29 powder bushing) is a simple, reliable, and affordable tool for shotgun reloaders. Its consistency and durability make it a valuable addition to any reloading bench.
The price is more than justified, given the improved consistency it brings to your shotshells. I would absolutely recommend it to anyone looking to streamline their reloading process and improve the performance of their ammunition.
If you’re ready to take control of your shotshell reloading and achieve more consistent results, give the Mec Gunsmith And Reloading Equipment 29 a try. You won’t be disappointed.