MAGNETOSPEED BARREL SPACER KIT Review

First Thoughts on the MAGNETOSPEED BARREL SPACER KIT

The MAGNETOSPEED BARREL SPACER KIT might seem like a small, insignificant product. However, for users of the MagnetoSpeed chronograph, particularly those with barrels that exhibit a significant taper, this little kit can be the difference between accurate readings and frustrating failures. As an experienced outdoor and tactical gear specialist, I’ve seen countless gadgets promising the world, but this unassuming set of spacers actually solves a very specific, and very real, problem.

I encountered the need for this kit when I started using my MagnetoSpeed V3 on a lightweight hunting rifle with a sharply tapered barrel. The bayonet wouldn’t consistently sit flush against the barrel, leading to inconsistent velocity readings and, frankly, a lot of wasted ammo. The frustration was palpable; I needed a reliable way to ensure proper sensor alignment.

Upon unboxing the MAGNETOSPEED BARREL SPACER KIT, my initial impression was one of simplicity. The kit consists of several small, polymer spacers of varying thicknesses. The materials felt durable enough for the task, though hardly luxurious; these are utilitarian parts, meant for function over form.

I considered other DIY solutions – shimming with tape, crafting my own spacers from Kydex, etc. However, the precision and ease of use offered by the MAGNETOSPEED BARREL SPACER KIT ultimately swayed my decision. I picked this over other solutions because I valued a clean, professional, and, most importantly, consistent result.

My first impression? Relief, honestly. A small, inexpensive solution to a nagging problem. I was cautiously optimistic that this would restore the accuracy I expected from my MagnetoSpeed.

Real-World Testing: Putting MAGNETOSPEED BARREL SPACER KIT to the Test

First Use Experience

I tested the MAGNETOSPEED BARREL SPACER KIT at my local outdoor shooting range. The range offers a variety of distances, and weather conditions are often unpredictable. It was a moderately windy day, which can affect chronograph readings even with a properly mounted sensor.

Installation was surprisingly easy. Selecting the appropriate combination of spacers to achieve a snug and secure fit of the MagnetoSpeed bayonet took only a few minutes. No tools were required, and the spacers stayed in place during firing.

The results were immediately noticeable. Velocity readings became much more consistent, and I experienced far fewer “ERROR” messages from the MagnetoSpeed. This instantly improved the reliability of my data when developing loads.

Extended Use & Reliability

After several months of use, the MAGNETOSPEED BARREL SPACER KIT has proven to be a valuable addition to my range kit. The spacers themselves show no signs of wear or degradation. They have been exposed to temperature swings, moisture, and the occasional bump and scrape, without any issues.

Maintenance is practically non-existent. A quick wipe with a cloth is all that’s needed to keep them clean.

Compared to my initial attempts at makeshift shimming, the MAGNETOSPEED BARREL SPACER KIT is a night-and-day difference. It’s a reliable, consistent, and hassle-free solution that significantly outperforms any improvised method. It ensures proper bayonet alignment, something crucial for getting accurate readings from the chronograph.

Breaking Down the Features of MAGNETOSPEED BARREL SPACER KIT

Specifications

The MAGNETOSPEED BARREL SPACER KIT is a collection of polymer shims designed to provide a stable mounting surface for MagnetoSpeed bayonets on barrels with significant tapers. The kit contains multiple spacers of varying thicknesses to accommodate a wide range of barrel profiles. These spacers are designed to fill the gap between the barrel and the MagnetoSpeed bayonet, ensuring proper sensor alignment.

These specifications matter because a secure and level mount is critical for accurate velocity readings. An improperly aligned sensor can introduce significant errors into your data, rendering it useless for load development or performance analysis. Consistent readings are paramount when you’re trying to fine-tune your loads or compare the performance of different ammunition.

Performance & Functionality

The MAGNETOSPEED BARREL SPACER KIT performs its job admirably. It effectively bridges the gap caused by tapered barrels, allowing the MagnetoSpeed bayonet to sit flush and securely. This translates directly into more accurate and reliable velocity readings.

The kit’s strength lies in its simplicity and effectiveness. Its weakness, if any, is that it only addresses barrels with extreme tapers.

The kit exceeded my expectations. I was initially skeptical that such a simple solution could make such a big difference, but the improved consistency in my velocity data speaks for itself.

Design & Ergonomics

The spacers are constructed from a durable polymer material. The weight is negligible, adding virtually nothing to the overall setup.

The design is simple and intuitive. There’s virtually no learning curve; anyone familiar with the MagnetoSpeed system can easily install and use the spacers.

Durability & Maintenance

The polymer construction appears durable enough for its intended purpose. I expect the spacers to last for many years with proper care.

Maintenance is minimal. The polymer material is easy to clean with a simple wipe-down.

Accessories and Customization Options

The MAGNETOSPEED BARREL SPACER KIT is a standalone product and doesn’t require any additional accessories. It is designed specifically to work with the MagnetoSpeed V3 and similar bayonet-style chronographs.

The kit itself offers a degree of customization, allowing users to select the appropriate combination of spacers for their specific barrel profile. It interfaces directly with the mounting system of the MagnetoSpeed chronograph, creating a stable and dependable platform for reading bullet velocities.

Pros and Cons of MAGNETOSPEED BARREL SPACER KIT

Check Best Price HERE

Who Should Buy MAGNETOSPEED BARREL SPACER KIT?

The MAGNETOSPEED BARREL SPACER KIT is perfect for shooters who use a MagnetoSpeed chronograph and own firearms with significantly tapered barrels. This includes hunters using lightweight mountain rifles, competitive shooters with custom barrels, and anyone seeking the most accurate velocity data possible. It is also a great addition to any range kit where varying firearms are used, and some have tapered barrels.

If you consistently get errors or inconsistent readings with your MagnetoSpeed due to barrel taper, this kit is a must-have. If you only shoot firearms with straight or bull barrels, you can likely skip this product.

A must-have accessory to go along with this is your MagnetoSpeed chronograph itself. There are no specific modifications required.

Conclusion on MAGNETOSPEED BARREL SPACER KIT

The MAGNETOSPEED BARREL SPACER KIT is a simple yet effective solution to a common problem faced by users of MagnetoSpeed chronographs. While seemingly insignificant, this small set of spacers can dramatically improve the accuracy and reliability of your velocity data.

At a price of $7.49, the MAGNETOSPEED BARREL SPACER KIT is an absolute steal. The improvement in data accuracy is well worth the minimal investment.

I wholeheartedly recommend the MAGNETOSPEED BARREL SPACER KIT to anyone struggling with consistent readings from their MagnetoSpeed due to a tapered barrel. Don’t let barrel taper compromise your load development. Invest in the MAGNETOSPEED BARREL SPACER KIT and experience the difference!

Check Best Price HERE