Let’s Talk About Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts
In the world of precision shooting, a reliable scope mount is just as crucial as the optic itself. The Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts promises exactly that: a rock-solid, repeatable, and quick-release platform for mounting your scope on your Savage 110 long action or Axis rifle. Leupold is a name synonymous with quality optics and mounting solutions, and these mounts aim to uphold that reputation.
I’ve spent years chasing accuracy, often frustrated by shifting zero and unreliable mounting systems. Finding a mount that could withstand the recoil of larger calibers without losing zero, while also allowing for quick scope changes when needed, became a holy grail of sorts.
When I first unboxed the Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts, I was immediately struck by their clean, low-profile design. The matte black finish looked durable and professional, and the one-piece construction felt incredibly solid. Picking them up, the lightweight aluminum was surprising, yet it still felt robust.
Compared to other mounts I’ve used, such as the Weaver Grand Slam steel bases or the Warne Maxima quick-detach rings on separate bases, the Leupold QRW system seemed simpler and potentially more repeatable. I picked this specific model due to its one-piece design that promised better alignment and the quick-release levers for fast optic swaps. My initial excitement was tempered with a healthy dose of skepticism, as I’ve been burned by “quick-release” systems before that weren’t truly repeatable.
I was cautiously optimistic. The build quality appeared excellent, but the proof would be in the shooting.
Real-World Testing: Putting Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts to the Test
First Use Experience
I mounted the Leupold QRW mount on my trusted Savage 110 in .30-06, topping it with a Leupold VX-3i 3.5-10×40 scope. The initial zeroing took place at my local range, under relatively ideal conditions – clear skies, minimal wind. Installation was straightforward; the mount fit perfectly onto the receiver, and the scope sat snugly in the rings.
The first few shots were encouraging. The zero held tight, even after adjusting the magnification. I then subjected the rifle to a series of rapid-fire strings, simulating a follow-up shot scenario while hunting. To my surprise, the zero remained consistent.
One notable test was removing and reattaching the scope using the quick-release levers. After remounting the optic, the point of impact shifted less than half an inch at 100 yards, which is more than acceptable for most hunting situations.
Extended Use & Reliability
After several months of use, including multiple range sessions and a deer hunting trip, the Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts have proven to be remarkably reliable. I’ve subjected the rifle to varying weather conditions, including rain and temperatures ranging from below freezing to 80 degrees Fahrenheit.
The mount shows no signs of loosening or shifting, and the matte black finish has held up well against scratches and dings. Cleaning is simple – a quick wipe down with a lightly oiled cloth is all it takes to keep it in good condition.
Compared to my previous experiences with two-piece mounts, the Leupold QRW has been a significant improvement in terms of maintaining zero after removing and reattaching the scope. The one-piece design undoubtedly contributes to its stability and accuracy. While no quick-release system is perfect, this one comes closer than most.
Breaking Down the Features of Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts
Specifications
Manufacturer: Leupold.
Color: Black.
Finish: Matte.
Fabric/Material: Aluminum.
Quantity: 1 (one-piece mount).
Base/Mount Type: QD (Quick Detach) mount.
Gun Make: Savage.
Gun Model: Savage Model 110 Long Action.
Action Length: Long Action.
Gun Type: Rifle.
Weight: 1.3 oz.
Thread Size: 8-40.
These specifications are important because they dictate the compatibility, durability, and weight of the mount. The aluminum construction ensures a lightweight yet strong platform, while the matte finish minimizes glare and provides corrosion resistance. The QD mount feature allows for rapid scope removal and reattachment without significant zero shift, while the 8-40 thread size ensures a secure fit with compatible Savage 110 L/A receivers.
Performance & Functionality
The Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts performs its job admirably, providing a stable and repeatable platform for mounting optics. Its strength lies in its ease of use and the reliability of its quick-release mechanism.
The only weakness I’ve observed is that, like all aluminum mounts, it’s more susceptible to damage from overtightening screws compared to steel. However, with proper torque and care during installation, this is easily avoidable. It definitely meets my expectations and provides a more confident shooting experience.
Design & Ergonomics
The one-piece design contributes significantly to its structural integrity. Its light weight of only 1.3 oz doesn’t add noticeable bulk to the rifle.
The low profile keeps the scope close to the bore, which aids in maintaining proper cheek weld and a natural shooting position. There is a slight learning curve involved in using the QR levers efficiently, but after a few practice runs, it becomes second nature.
Durability & Maintenance
The anodized aluminum construction of the Leupold QRW mount is corrosion-resistant, and the finish is durable enough to withstand typical wear and tear. With proper care, including cleaning and occasional lubrication of the quick-release levers, it should last for many years.
Repairing is generally not an option; replacement is the more practical approach if significant damage occurs. But the solid construction and the reputation of Leupold suggests that, with normal use, it will last for years.
Accessories and Customization Options
The Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts itself doesn’t have specific accessories, but it’s designed to be compatible with any scope that fits standard 1-inch or 30mm rings (depending on the rings chosen separately). No other customization options exist, it is what it is, a stable base.
It’s compatible with various scope brands, including Leupold, Vortex, and Nightforce, as long as the ring height is appropriate for the scope’s objective lens diameter and the rifle’s action. The steel recoil plates provide a solid and reliable mount for your optic.
Pros and Cons of Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts
Pros
- Quick Detach (QD) Levers: Allows for rapid scope removal and reattachment with minimal zero shift.
- Lightweight Aluminum Construction: Minimizes added weight to the rifle.
- One-Piece Design: Enhances stability and alignment compared to two-piece systems.
- Durable Matte Finish: Provides corrosion resistance and reduces glare.
- Easy Installation: Simple and straightforward mounting process.
Cons
- Aluminum Construction: More susceptible to damage from overtightening screws compared to steel.
- Limited Customization: No inherent options beyond scope ring selection.
Who Should Buy Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts?
The Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts is perfect for hunters who need to switch between different scopes for various hunting scenarios (e.g., a low-power scope for thick brush and a high-power scope for long-range shooting). It’s also well-suited for competitive shooters who want a reliable and repeatable quick-detach system for their optics.
This mount is not ideal for shooters who prioritize absolute maximum rigidity and are willing to sacrifice the quick-detach functionality. Shooters using extremely high-recoil calibers might also prefer a steel mount for added durability.
A must-have accessory is a high-quality torque wrench to ensure proper screw tightening and prevent damage to the aluminum.
Conclusion on Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts
The Leupold QRW Savage 110 L/A-Axis 1-pc 8-40 Mounts delivers on its promise of providing a reliable, repeatable, and quick-release scope mounting platform for Savage 110 long action and Axis rifles. The ease of use, lightweight design, and durable construction make it a worthwhile investment for shooters who value versatility and convenience.
At a price of $14.49, the value proposition is incredibly strong. It’s a small price to pay for the peace of mind knowing that your scope is securely mounted and can be quickly removed and reattached without significant zero shift.
I would personally recommend it to anyone looking for a quality quick-detach mount for their Savage 110 long action or Axis rifle. Upgrade your shooting experience – grab a Leupold QRW mount and get back to what matters: hitting your target.