Let’s Dive into Lee Three-Die Carbide Sets .32 H&R Magnum 90809
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 are a cornerstone for any serious reloader of this fantastic, albeit niche, cartridge. Manufactured by Lee Precision, these dies offer a complete solution for resizing, depriming, and crimping .32 H&R Magnum ammunition, ensuring reliable and accurate performance. With carbide construction and a reputation for affordability, these dies have earned their place on reloading benches worldwide.
I got into reloading the .32 H&R Magnum because factory ammunition was becoming increasingly expensive and difficult to find, severely limiting my ability to enjoy my favorite revolvers. Reloading offered a cost-effective and customizable solution. I needed a reliable and precise die set to produce consistent, high-quality ammunition, and Lee Precision had always proven reliable in the past.
Upon unboxing the Lee Three-Die Carbide Sets .32 H&R Magnum 90809, I was immediately impressed by the solid feel of the dies. The carbide sizing die gleamed, promising smooth and effortless resizing of cases. The fit and finish were clean and functional, reflecting Lee’s commitment to value.
Compared to some other brands I considered, like RCBS or Hornady, the Lee set was noticeably more affordable. While those other brands might boast slightly finer finishes or more elaborate packaging, the Lee set offered the same essential functionality at a significantly lower price point. I also know folks who had used the Lee dies and gave very positive feedback.
My first impression was one of cautious optimism. I was excited to finally unlock the potential of my .32 H&R Magnum revolvers, but I was also aware that reloading requires precision and attention to detail. The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 looked like a solid starting point on my reloading journey.
Real-World Testing: Putting Lee Three-Die Carbide Sets .32 H&R Magnum 90809 to the Test
First Use Experience
I tested the Lee Three-Die Carbide Sets .32 H&R Magnum 90809 at my home reloading bench. I focused on producing ammunition for target practice and small game hunting with my Ruger Single-Six. The ambient temperature was moderate, around 70 degrees Fahrenheit, and humidity was low, creating ideal reloading conditions.
The dies performed admirably under these conditions. The carbide sizing die effortlessly resized even slightly bulged cases. The easy adjust decapper die punched out the primers with consistent force.
The ease of use was immediately apparent. Even without extensive reloading experience, the straightforward design and clear instructions made the process simple to follow. I did reference a couple of videos, but that was more for general reloading guidance as this was the first time I had reloaded the .32 H&R Magnum.
I did encounter one minor issue during my first session. One of my older cases resisted resizing more than the others, requiring a bit more force on the press handle, but that was more due to the brass condition. This single instance was easily remedied and highlighted the importance of case preparation.
Extended Use & Reliability
After several months of consistent use, the Lee Three-Die Carbide Sets .32 H&R Magnum 90809 have proven to be incredibly reliable. I have loaded thousands of rounds with these dies, and they continue to perform flawlessly. The quality and reliability of the Lee product has proven to be top notch.
The dies show virtually no signs of wear and tear. The carbide sizing die remains smooth and polished. The decapping pin is still sharp and effective.
Maintenance is minimal. A simple wipe-down with a clean cloth after each reloading session is all that’s required to keep the dies in top condition. I also apply a light coat of gun oil to prevent rust in high-humidity environments.
Compared to my previous experience with steel dies (on other calibers), the carbide sizing die of the Lee Three-Die Carbide Sets .32 H&R Magnum 90809 is a game-changer. It eliminates the need for case lubrication, significantly speeding up the reloading process and improving consistency. They have definitely outperformed my expectations.
Breaking Down the Features of Lee Three-Die Carbide Sets .32 H&R Magnum 90809
Specifications
- Caliber: .32 H&R Magnum
- Die Type: Three-Die Set (Full Length Sizing Die, Easy Adjusting Carbide Recapper Die, Factory Crimp Die)
- Material: Carbide (Sizing Die) and Steel
- Included: Full Length Sizing Die, Easy Adjusting Carbide Recapper Die, Factory Crimp Die
- Purpose: Reloading .32 H&R Magnum ammunition
These specifications are critical for several reasons. The .32 H&R Magnum caliber ensures the dies are specifically designed for this cartridge, guaranteeing proper fit and function. The carbide sizing die offers superior durability and eliminates the need for case lubrication, a significant advantage in terms of efficiency and consistency.
Performance & Functionality
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 perform their job exceptionally well. They consistently produce accurate and reliable ammunition. This ensures that each round is properly sized, primed, and crimped.
The primary strength lies in the carbide sizing die. Its smooth action and exceptional durability make resizing cases effortless. The easy adjust decapper die does a good job on spent primers.
One area for potential improvement would be the consistency of the crimp die. While effective, it requires careful adjustment to avoid over-crimping. The crimp is very sensitive to adjustment.
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 exceeded my expectations in terms of ease of use and overall value. They deliver consistent performance at an affordable price. The Lee Precision quality is impressive.
Design & Ergonomics
The dies are constructed from high-quality materials, with the carbide sizing die offering exceptional durability. The weight is balanced, providing a stable and secure feel when mounted in a reloading press. They have a very solid feel to them.
The design is user-friendly, with clearly labeled components and straightforward adjustments. There is minimal learning curve. Even novice reloaders can quickly master their use.
Durability & Maintenance
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 are built to last. The carbide sizing die is incredibly resistant to wear and tear. With proper care and maintenance, these dies should provide years of reliable service.
Maintenance is simple and straightforward. Regular cleaning with a clean cloth and a light coat of gun oil is all that’s required to keep them in top condition. There is not much that is going to break on these.
Accessories and Customization Options
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 come with all the necessary components for resizing, depriming, and crimping .32 H&R Magnum ammunition. There are no additional accessories included. You will need a shell holder and a reloading press.
While the dies themselves do not offer extensive customization options, they are compatible with a wide range of standard reloading presses and shell holders. The industry-standard threading makes them easy to integrate into existing reloading setups.
Pros and Cons of Lee Three-Die Carbide Sets .32 H&R Magnum 90809
Pros
- Affordable Price: The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 offer exceptional value for the money compared to other brands.
- Carbide Sizing Die: The carbide sizing die provides smooth, effortless resizing and eliminates the need for case lubrication.
- Easy to Use: The dies are designed for ease of use, making them suitable for both novice and experienced reloaders.
- Durable Construction: Built from high-quality materials, these dies are designed to withstand years of use.
- Complete Set: The three-die set includes all the necessary components for resizing, depriming, and crimping .32 H&R Magnum ammunition.
Cons
- Crimp Die Sensitivity: The crimp die can be sensitive to adjustment, requiring careful attention to avoid over-crimping.
- Limited Customization: The dies themselves do not offer extensive customization options.
Who Should Buy Lee Three-Die Carbide Sets .32 H&R Magnum 90809?
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 are perfect for:
- .32 H&R Magnum Enthusiasts: Anyone who shoots .32 H&R Magnum and wants to save money on ammunition costs.
- Reloaders on a Budget: Those looking for a high-quality, reliable die set at an affordable price.
- Novice Reloaders: Individuals new to reloading who need an easy-to-use and forgiving set of dies.
Who should skip this product?
- Those who prefer premium, high-end reloading equipment regardless of cost.
- Reloaders who require highly specialized or customizable die sets for advanced applications.
Must-have accessories or modifications?
- A quality reloading press.
- A shell holder specifically for .32 H&R Magnum.
- A reloading manual for safe loading data.
Conclusion on Lee Three-Die Carbide Sets .32 H&R Magnum 90809
The Lee Three-Die Carbide Sets .32 H&R Magnum 90809 are an outstanding value for anyone reloading .32 H&R Magnum ammunition. They provide reliable performance, exceptional durability, and ease of use at a fraction of the cost of competing brands. The Lee Precision value is unmatched.
The price is more than justified by the quality and performance of these dies. The cost savings on ammunition alone will quickly pay for the initial investment. The product pays for itself, making it a very smart purchase.
I wholeheartedly recommend the Lee Three-Die Carbide Sets .32 H&R Magnum 90809 to anyone looking to reload .32 H&R Magnum ammunition. Whether you’re a seasoned reloader or just starting out, these dies will help you produce accurate, reliable, and cost-effective ammunition. Buy this product and start reloading today!