Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 Review

Let’s Dive into Lee Factory Crimp Rifle Die For 416 Remington Mag 90906

The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 offers reloaders a vital tool to ensure consistent and reliable ammunition, especially crucial for the potent .416 Remington Magnum cartridge. This die aims to solve the problem of bullet setback and improve accuracy by applying a uniform crimp to each round. It stands out with its included carbide sizer ring, providing an extra layer of assurance that every round will chamber smoothly in your rifle.

I was driven to acquire this die after experiencing inconsistent grouping with my .416 Remington Magnum reloads. Bullet setback during feeding was a clear concern, impacting both accuracy and safety. I was seeking a solution to provide a firm and uniform crimp.

My initial impression upon unboxing the Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 was one of functional simplicity. The die’s construction felt robust, although not overly refined, with a utilitarian design that suggested it was built for purpose, not aesthetics. The carbide sizer ring was a welcome addition, hinting at its ability to correct minor inconsistencies in case neck diameter.

Compared to other crimping dies, I was particularly interested in the Lee Factory Crimp die because of its reputation for applying a crimp that’s distinct from a traditional roll crimp. I had considered using a standard roll crimp die but opted for the Lee die, hoping its design would prevent bullet deformation and improve accuracy. My past experiences with Lee products had generally been positive, leaning me towards Lee for its reputation of value and functionality.

Initially, I was cautiously optimistic, hopeful that this die would resolve my crimping issues and enhance the performance of my .416 Remington Magnum ammunition. I was eager to test it out and see if it lived up to its claims.

Check Best Price HERE

Real-World Testing: Putting Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 to the Test

First Use Experience

My first test of the Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 took place at my local shooting range, where I loaded a batch of .416 Remington Magnum cartridges with varying powder charges and bullet weights. The conditions were mild, with a slight breeze and clear skies. I used the die according to the included instructions, carefully adjusting the crimp pressure using the set screw.

The die proved relatively easy to use, although I did spend some time experimenting with the optimal crimp setting. I found that a slight adjustment of the set screw made a significant difference in the tightness of the crimp. One notable initial issue was a slight learning curve in achieving the desired crimp without excessive pressure, which could potentially damage the bullet or case.

After the first use, I noticed a marked improvement in the consistency of my reloads. The crimp appeared uniform across all rounds, and I experienced no further bullet setback issues during cycling.

Extended Use & Reliability

After several weeks and hundreds of rounds loaded with the Lee Factory Crimp Rifle Die For 416 Remington Mag 90906, I can confidently say that it has become an indispensable part of my reloading process. The die has consistently produced reliable crimps, improving the accuracy and consistency of my .416 Remington Magnum ammunition. There have been no reliability issues.

The die has held up remarkably well with no signs of wear and tear. I clean it periodically with a dry cloth and a bit of gun oil to prevent rust. Overall, the Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 has exceeded my expectations, outperforming my previous reliance on standard roll crimps and improving my reloading consistency significantly.

Breaking Down the Features of Lee Factory Crimp Rifle Die For 416 Remington Mag 90906

Specifications

The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 is specifically designed for the .416 Remington Magnum cartridge, ensuring a precise fit and optimal crimping performance. The die is constructed primarily from steel, providing durability and longevity. A key feature is the included carbide sizer ring, which post-sizes the cartridge while crimping, guaranteeing that rounds chamber freely.

This added step is critical in ensuring reliable feeding in rifles that might have tighter chambers. The die’s design allows for adjustable crimp pressure via a simple set screw, accommodating a range of bullet types and desired crimp tightness. This adjustability is important for fine-tuning the crimp for optimal accuracy and bullet retention.

Performance & Functionality

The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 performs its job admirably, consistently applying a uniform and secure crimp to .416 Remington Magnum cartridges. The accuracy improvement I experienced after using this die was noticeable, with tighter groupings at the range. The die is easy to use, although some experimentation may be needed to find the perfect crimp setting for a specific bullet and powder combination.

The main strength of this die is its ability to eliminate bullet setback, which can be a significant issue with heavy-recoiling cartridges like the .416 Remington Magnum. The main weakness is the potential for over-crimping if the set screw is not adjusted carefully. However, with a little practice, this can be avoided. The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 meets and even exceeds expectations, significantly enhancing the quality and reliability of my reloaded ammunition.

Design & Ergonomics

The build quality of the Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 is solid. The die is primarily made of steel, giving it a robust feel. The die’s weight is moderate, providing stability during use. The design is straightforward and functional, with a simple set screw for adjusting the crimp pressure.

The die is relatively user-friendly, although reloaders new to the Lee Factory Crimp design may need to spend some time experimenting with the settings. The lack of more detailed instructions is a minor drawback.

Durability & Maintenance

The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 is built to last. The steel construction and simple design contribute to its durability. Regular cleaning and lubrication are essential to prevent rust and ensure smooth operation.

The die is relatively easy to maintain, requiring only occasional cleaning with a dry cloth and a bit of gun oil. The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 is a long lasting tool.

Accessories and Customization Options

The Lee Factory Crimp Rifle Die For 416 Remington Mag 90906 comes as a standalone die, with no additional accessories included. The only adjustment possible is the crimp pressure via the set screw. While it doesn’t offer extensive customization, the die is compatible with most standard reloading presses and shell holders.

Pros and Cons of Lee Factory Crimp Rifle Die For 416 Remington Mag 90906