Kel-Tec Grip Extension For PF9 Magazine Review

Let’s Dive into Kel-Tec Grip Extension For PF9 Magazine

The Kel-Tec Grip Extension For PF9 Magazine aims to enhance the handling of the notoriously small Kel-Tec PF9 pistol. This polymer extension replaces the magazine’s floor plate, adding length to the grip. It promises a more secure and comfortable hold, particularly for those with larger hands, at a budget-friendly price from Kel-Tec.

I was seeking a solution to the “pinky dangle” that plagues many subcompact pistol owners. My quest was simple: to achieve a full-handed grip on my PF9 without sacrificing concealability. This extension seemed like the perfect compromise.

Upon opening the package, I was met with a simple, unassuming piece of black plastic. The Kel-Tec Grip Extension For PF9 Magazine felt lightweight, almost deceptively so. Its texture was slightly rough, but seemed adequately molded, though it lacked a refined finish.

I considered several alternatives, including +1 round magazines with integrated extensions. Ultimately, the price point and the promise of maintaining the original magazine capacity drew me to the Kel-Tec extension. This seemed like a cost-effective first step.

My initial reaction was a mix of anticipation and slight skepticism. I hoped it would solve my grip issue, but I also worried about its potential impact on concealability and overall feel. The proof, as they say, would be in the shooting.

Check Best Price HERE

Real-World Testing: Putting Kel-Tec Grip Extension For PF9 Magazine to the Test

First Use Experience

My first outing with the Kel-Tec Grip Extension For PF9 Magazine was at an indoor shooting range. I wanted a controlled environment to assess its impact on my grip and accuracy. The range was well-lit and climate-controlled, offering ideal conditions for testing.

The extension felt immediately different in my hand. I found my pinky now had a place to rest, but the edge felt a bit sharp and the texture was noticeable against my skin. It didn’t quite fill my hand as perfectly as I’d hoped.

Installing the extension was simple, but the fit wasn’t seamless initially; a bit of force was required to get it seated properly. After the initial install, the magazine seated in the pistol without issue. After running through a few magazines, I realized I needed to adjust my grip slightly to avoid the extension digging into my pinky.

Extended Use & Reliability

After several range sessions spanning a couple of months, the Kel-Tec Grip Extension For PF9 Magazine has held up reasonably well. I haven’t observed any significant wear or tear on the polymer material. However, the initial discomfort persists.

Cleaning is straightforward; a quick wipe-down with a cloth is usually sufficient. I occasionally use a brush to remove any debris that might accumulate in the textured areas. The Kel-Tec extension requires little to no dedicated maintenance.

Compared to my experience with the stock PF9 grip, the extension provides a definite improvement in handling, though not a perfect one. While it doesn’t fully resolve the “pinky dangle,” it does offer a more substantial purchase on the pistol. I would still rather have a larger grip, but I appreciate what this has to offer.

Breaking Down the Features of Kel-Tec Grip Extension For PF9 Magazine

Specifications

• The Kel-Tec Grip Extension For PF9 Magazine is constructed from durable plastic, ensuring lightweight and resistance to impacts.
• It adds approximately 0.5 inches to the overall grip length of the PF9, allowing for a more complete hand hold.
• The Kel-Tec Grip Extension For PF9 Magazine is designed to maintain the original magazine capacity of the PF9 magazine. This prevents the need to buy more magazines.
• It is specifically engineered for the Heckler & Koch PF9 pistol, guaranteeing a secure and proper fit. The specifications are listed incorrectly on the product details page.
• The extension is finished in black, matching the factory color of the PF9 frame and magazines. The color provides a consistent aesthetic.

These specifications are important because they directly influence the ergonomics and concealability of the PF9. The material choice balances durability and weight, while the added length aims to improve grip without excessively increasing the pistol’s overall size. I think this works well to balance function and form.

Performance & Functionality

The Kel-Tec Grip Extension For PF9 Magazine enhances the grip on the notoriously small PF9. This translates to improved control during firing, especially for individuals with larger hands. This means that the pistol’s jump will be lessened by more purchase of the weapon.

The primary weakness is the somewhat rough texture and edges of the extension. It may require some sanding or polishing to achieve optimal comfort for some users, including myself. This is easily addressed.

Overall, the Kel-Tec Grip Extension For PF9 Magazine meets its basic expectation of extending the grip. It provides a place for the pinky finger, though its ergonomic refinement could be improved. I had hoped for a seamless install and comfort, but this will need to be worked on.

Design & Ergonomics

The build quality is adequate for a polymer accessory at this price point. The plastic is sturdy enough to withstand regular use. The Kel-Tec Grip Extension For PF9 Magazine is light enough.

The design is simple and functional, although the lack of rounded edges detracts from the overall comfort. There’s minimal learning curve. It installs easily.

Durability & Maintenance

Given its construction, the Kel-Tec Grip Extension For PF9 Magazine should last for a reasonable amount of time. It won’t be as durable as a metal alternative. The material should withstand routine handling and use, and with a little care will last a long time.

Maintenance is simple, requiring only occasional cleaning. Any standard polymer-safe cleaner can be used to remove dirt and grime. I use this during regular cleaning.

Accessories and Customization Options

The Kel-Tec Grip Extension For PF9 Magazine comes as a standalone product with no additional accessories included. There are no customization options directly related to the extension itself. You may use grip tape, or stipple the extension.

It is compatible with standard PF9 magazines and holsters designed to accommodate the slightly longer grip. The lack of accessory integration is a missed opportunity.

Pros and Cons of Kel-Tec Grip Extension For PF9 Magazine

Check Best Price HERE

Who Should Buy Kel-Tec Grip Extension For PF9 Magazine?

The Kel-Tec Grip Extension For PF9 Magazine is perfect for Kel-Tec PF9 owners with medium to small hands seeking an affordable grip enhancement. It is good for those prioritizing concealability and magazine capacity. It is a good addition for range and self-defense use.

Individuals with very large hands or those sensitive to rough textures should skip this product. These people may want to upgrade to the +1 magazine. Those seeking a premium, fully ergonomic solution might also consider alternatives.

A rubberized grip sleeve or some grip tape may be a must-have modification for some users. Those seeking a smoother, more comfortable feel will want these items. These are inexpensive to add.

Conclusion on Kel-Tec Grip Extension For PF9 Magazine

The Kel-Tec Grip Extension For PF9 Magazine is a budget-friendly accessory that delivers a noticeable improvement in the PF9’s handling. I’ve found that this provides an improved experience. While it’s not without its flaws, namely the rough texture and somewhat basic design, it effectively addresses the common complaint of insufficient grip length.

At its affordable price point, the Kel-Tec Grip Extension For PF9 Magazine offers a worthwhile value proposition. The enhancement it provides is appreciated. It does what it intends to do.

I would recommend it to PF9 owners looking for a simple and inexpensive way to improve their grip and control. The potential need for minor modifications is a small price to pay for the added comfort and stability. I hope you enjoy it.