The Kel-Tec CNC GRIP EXTENSION PF9 Made a Bold First Impression
The Kel-Tec CNC GRIP EXTENSION PF9 is a simple, inexpensive upgrade for the Kel-Tec PF9 pistol. It replaces the factory magazine base plate, offering a slightly longer grip and potentially improved handling. This little piece of polymer promised to address a common complaint about the PF9: its notoriously short grip.
My search for this extension stemmed from a persistent issue with my PF9. The compact size, while excellent for concealed carry, often left my pinky finger dangling awkwardly beneath the grip. This made for an uncomfortable and less secure hold, especially during rapid firing drills at the range. I needed a solution that wouldn’t drastically increase the pistol’s overall size but would significantly improve my grip.
Upon receiving the Kel-Tec CNC GRIP EXTENSION PF9, I was immediately impressed by its simplicity. It’s a small piece, but it felt solid enough. The texture appeared to match the factory grip adequately. Compared to Pearce Grip extensions or similar aftermarket options, this one stood out due to its minimalist design and Kel-Tec branding, suggesting a potentially better fit and finish. My initial impression was cautiously optimistic; it seemed like a worthwhile gamble at its low price point.
Real-World Testing: Putting Kel-Tec CNC GRIP EXTENSION PF9 to the Test
First Use Experience
I first tested the Kel-Tec CNC GRIP EXTENSION PF9 at my local indoor shooting range. The range provided a controlled environment to assess the impact of the extension on my grip and shooting accuracy. Installation was incredibly straightforward, requiring only a few seconds to swap out the factory base plate.
The immediate difference was noticeable. My pinky now had a place to rest, resulting in a more complete and comfortable grip. Recoil felt slightly more manageable, and I felt more in control during rapid firing strings. No issues or surprises arose during the first range session; the extension performed exactly as advertised.
Extended Use & Reliability
After several range trips and a few months of concealed carry, the Kel-Tec CNC GRIP EXTENSION PF9 has held up remarkably well. There are no signs of significant wear and tear, despite regular use and exposure to the elements during outdoor training sessions. The polymer construction seems durable enough for its intended purpose.
Maintenance is virtually non-existent; I simply wipe it down with a damp cloth when cleaning the pistol. Compared to my previous grip experience, where I constantly adjusted my hand due to the short factory grip, the extension has been a noticeable improvement, allowing for more consistent and accurate shooting. I am definitely not disappointed!
Breaking Down the Features of Kel-Tec CNC GRIP EXTENSION PF9
Specifications
- The Kel-Tec CNC GRIP EXTENSION PF9 is designed specifically for the Kel-Tec PF9 pistol. This ensures proper fit and function.
- It replaces the factory magazine base plate. This design adds minimal length to the grip.
- The extension is made from a durable polymer material. This keeps the weight down and contributes to its overall durability.
- It is designed to provide a more secure and comfortable grip on the PF9. It helps mitigate recoil and improve control.
- The price is $7.99, making it an extremely affordable upgrade. The low cost makes it an easy decision for PF9 owners.
Performance & Functionality
The Kel-Tec CNC GRIP EXTENSION PF9 delivers on its promise of improving the grip on the PF9. It gives a noticeable increase in comfort and control. Its primary strength lies in its simplicity and ease of installation.
However, the extension is quite basic; it doesn’t offer any enhanced texturing or ergonomic features beyond the added length. Some users may prefer a more aggressive grip texture. Overall, it effectively meets expectations for a simple grip extension at its price point.
Design & Ergonomics
The build quality of the Kel-Tec CNC GRIP EXTENSION PF9 is adequate, given its low cost. The polymer material feels reasonably durable, and the fit is generally good. The extension adds minimal weight to the pistol.
The added grip length is a welcome improvement in ergonomics for those with larger hands. There is virtually no learning curve. Installation is simple and intuitive.
Durability & Maintenance
The Kel-Tec CNC GRIP EXTENSION PF9 is expected to last for a reasonable amount of time under normal use. The polymer is resistant to most common solvents and cleaners. Maintenance is minimal; cleaning can be done as part of the normal pistol cleaning routine.
Accessories and Customization Options
The Kel-Tec CNC GRIP EXTENSION PF9 is a standalone accessory; it doesn’t require any additional parts for installation. While it doesn’t offer extensive customization options itself, it’s compatible with any magazine that fits the Kel-Tec PF9. There are no known compatibility issues with aftermarket PF9 accessories.
Pros and Cons of Kel-Tec CNC GRIP EXTENSION PF9
Pros
- Extremely affordable at only $7.99. Excellent value for the price.
- Noticeably improves grip comfort and control on the PF9. Provides a more secure hold.
- Simple and quick installation. Easy to install in seconds.
- Durable polymer construction. Built to last through regular use.
- Maintains the PF9’s concealability. Does not significantly increase size.
Cons
- Basic design with no enhanced texturing.
- Only compatible with the Kel-Tec PF9.
- Some users may prefer a more substantial grip extension.
Who Should Buy Kel-Tec CNC GRIP EXTENSION PF9?
The Kel-Tec CNC GRIP EXTENSION PF9 is perfect for Kel-Tec PF9 owners who find the factory grip too short and uncomfortable. It is also ideal for those seeking a simple and inexpensive way to improve their grip and control without sacrificing concealability. Those who prioritize affordability and ease of use will greatly benefit from this extension.
Those with very large hands or those seeking a highly textured or ergonomically advanced grip should skip this product. They should consider alternative grip solutions that offer more substantial enhancements. A must-have accessory to complement this extension is a high-quality holster designed for the Kel-Tec PF9, ensuring secure and comfortable concealed carry.
Conclusion on Kel-Tec CNC GRIP EXTENSION PF9
The Kel-Tec CNC GRIP EXTENSION PF9 is a surprisingly effective and affordable upgrade for the Kel-Tec PF9 pistol. For only $7.99, it addresses the common complaint of a short grip, providing a noticeable improvement in comfort and control. The price is absolutely justified, considering the enhanced shooting experience it provides.
I would personally recommend the Kel-Tec CNC GRIP EXTENSION PF9 to any PF9 owner looking for a simple, inexpensive way to improve their grip. It’s a small investment that can make a big difference. Give your PF9 a grip upgrade today!