Let’s Talk About Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS
Glock pistols are renowned for their reliability and simplistic design, but their factory grips often leave something to be desired. The Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS offers a cost-effective solution to enhance the ergonomics and control of these popular handguns. Hogue, a name synonymous with quality firearm accessories, aims to provide a comfortable and secure grip without the bulk of traditional aftermarket options with this product.
My search for the Hogue Wrapter began after experiencing persistent slippage during rapid-fire drills with my Glock 17. The factory grip, while functional, simply didn’t offer the purchase I needed for optimal control, especially when my hands were sweaty or exposed to the elements. I sought a thin, non-permanent solution that wouldn’t alter the frame of my pistol.
Upon unboxing the Hogue Wrapter, I was immediately impressed by the thinness and flexibility of the material. The multi-piece design appeared well-thought-out, promising comprehensive coverage of the grip area. The heat-activated adhesive gave me pause, but also piqued my curiosity regarding its long-term durability.
I considered Talon Grips and rubber slip-on grips, but the Hogue Wrapter’s promise of a truly custom fit and minimal bulk ultimately swayed my decision. The Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS seemed to offer the best compromise between enhanced grip and maintained concealability. My initial excitement was tempered by a slight apprehension about the installation process.
Real-World Testing: Putting Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS to the Test
First Use Experience
My initial testing took place at an outdoor range during a typical Texas summer day – hot and humid. I installed the Hogue Wrapter Adhesive Grip on my Glock 17 and ran through a series of drills, including rapid firing, one-handed shooting, and drawing from concealment. The difference was immediately noticeable.
The enhanced grip provided a secure and confident hold, even with sweaty hands. Recoil felt more manageable, and I was able to maintain a consistent grip throughout each drill. The thin profile of the Hogue Wrapter Adhesive Grip didn’t add any noticeable bulk, preserving the pistol’s comfortable feel in my hand.
The only initial issue I encountered was a small section of the grip peeling slightly after several hours of use in the heat. However, I quickly remedied this with a quick re-application of heat using a hairdryer.
Extended Use & Reliability
After several months of consistent use, the Hogue Wrapter Adhesive Grip has proven to be surprisingly durable. I’ve subjected it to various conditions, including rain, mud, and extended periods of carrying against my skin during concealed carry. While there is some minor wear and tear around the edges, the grip remains firmly attached and provides excellent traction.
Cleaning the grip is simple; a quick wipe down with a damp cloth is usually sufficient. The adhesive has held up well, showing no signs of peeling or degradation. Compared to previous grip solutions I’ve tried, the Hogue Wrapter Adhesive Grip offers a superior balance of comfort, durability, and enhanced control.
Breaking Down the Features of Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS
Specifications
The Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS is designed specifically for full-size Glock pistols, including the Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, and 35MOS models. The grip is available in black. It’s constructed from a textured, flexible polymer material.
The adhesive is heat-activated, allowing the grip to conform precisely to the contours of the Glock frame. The multi-piece design ensures optimal coverage of the grip area. The grip is described as having an ultra-thin profile, approximately 30% thinner than a credit card.
These specifications are crucial because they directly impact the grip’s effectiveness and overall user experience. The thin profile ensures minimal bulk and maintains concealability. The heat-activated adhesive guarantees a secure and custom fit.
Performance & Functionality
The Hogue Wrapter Adhesive Grip excels at enhancing the user’s grip and control over their Glock pistol. The textured surface provides excellent traction, even in wet or slippery conditions. The grip’s thin profile doesn’t interfere with holster compatibility or concealed carry.
One of the grip’s strengths is its ability to improve recoil management. By providing a more secure and comfortable hold, the Hogue Wrapter Adhesive Grip allows the user to maintain a tighter grip, which in turn reduces muzzle flip. A potential weakness is the installation process, which can be a bit tricky, requiring patience and careful application of heat.
Overall, the Hogue Wrapter Adhesive Grip meets and exceeds expectations. It delivers on its promise of enhanced grip, improved control, and minimal bulk.
Design & Ergonomics
The Hogue Wrapter Adhesive Grip is designed to enhance the ergonomics of the Glock pistol without significantly altering its overall profile. The materials used are high-quality and durable, providing a comfortable and secure feel in the hand. The weight of the grip is negligible, adding almost no noticeable weight to the pistol.
The grip is relatively user-friendly, although the installation process can be a bit challenging. The multi-piece design requires careful alignment and application of heat to ensure a proper fit. Once installed, the grip feels seamless and integrated with the pistol frame.
Durability & Maintenance
The Hogue Wrapter Adhesive Grip is designed to last for an extended period with proper care. The adhesive is strong and durable, resisting peeling and degradation even under heavy use. The grip is easy to maintain, requiring only occasional cleaning with a damp cloth.
The grip’s polymer construction is resistant to scratches, abrasions, and chemical damage. While the grip may eventually show signs of wear and tear, it should provide years of reliable service. Repairing the grip is not typically necessary, as the adhesive is designed to provide a permanent bond.
Accessories and Customization Options
The Hogue Wrapter Adhesive Grip does not come with any additional accessories. However, it’s compatible with most standard Glock accessories, such as lights, lasers, and holsters. The grip’s thin profile ensures that it doesn’t interfere with the use of these accessories.
The grip itself offers some limited customization options. The leftover remnant material offers customization options. The user can trim or modify the grip to better suit their individual preferences.
Pros and Cons of Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS
Pros
- Enhanced Grip: Dramatically improves purchase and control, especially in adverse conditions.
- Ultra-Thin Profile: Adds minimal bulk, maintaining concealability and holster compatibility.
- Custom Fit: Heat-activated adhesive conforms perfectly to the Glock frame.
- Durable Construction: High-quality materials resist wear and tear.
- Affordable Upgrade: A cost-effective way to significantly improve the ergonomics of your Glock.
Cons
- Installation can be tricky and requires patience.
- Adhesive may peel slightly in extreme heat if not properly applied.
Who Should Buy Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS?
The Hogue Wrapter Adhesive Grip is perfect for:
- Concealed carry practitioners seeking a non-bulky grip enhancement.
- Competitive shooters looking for improved recoil management and control.
- Law enforcement officers and military personnel who require a secure grip in demanding situations.
- Anyone who finds the factory Glock grip uncomfortable or inadequate.
Who should skip this product?
- Those who prefer a more aggressive, stippled grip surface.
- Individuals who are uncomfortable with heat-activated adhesive installation.
A must-have accessory is a heat gun or hairdryer for proper installation.
Conclusion on Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS
The Hogue Wrapter Adhesive Grip For Glock 17, 17MOS, 22, 31, 34, 34MOS, 35, 35MOS is an excellent upgrade for anyone looking to improve the ergonomics and control of their Glock pistol. The grip’s thin profile, custom fit, and durable construction make it a standout product in its class.
The price is certainly justified given the significant improvement in grip and control. I would personally recommend the Hogue Wrapter Adhesive Grip to any Glock owner seeking a cost-effective and non-permanent grip enhancement solution. If you’re tired of struggling with the factory Glock grip, give the Hogue Wrapter a try – you won’t be disappointed!