First Impressions of Ghost Inc Ghost MOAB SIG MPX Baseplates
The Ghost Inc Ghost MOAB SIG MPX Baseplates promise enhanced magazine handling for your SIG MPX. These baseplates aim to solve the common issues of undersized, slippery OEM base pads. The promise of easier extraction and improved grip definitely caught my attention.
As an experienced tactical gear specialist, I’m always looking for improvements to weapon platforms. I specifically wanted to address the notoriously slick factory MPX magazine baseplates that made reloads under stress less than ideal. I’ve fumbled reloads in competition because of those factory baseplates, so improved grip is paramount.
Upon receiving the Ghost Inc Ghost MOAB Baseplates, the first thing I noticed was the material. It’s a polymer, which is expected, but the texture seemed a little slicker than I anticipated based on the product description. The flared design and finger grooves were present, but the overall feel wasn’t as confidence-inspiring as some other aftermarket baseplates I’ve handled.
Compared to the Magpul PMAG floor plates or even some aluminum aftermarket options, the Ghost Inc offering felt a little less robust. I picked these specifically for the advertised enhanced grip and the debris evacuation ports, hoping for a functional improvement over the minimalist factory baseplates. I was initially cautiously optimistic, but that quickly faded.
My initial impression was mixed. The design seemed promising, but the actual feel and the user feedback I saw online gave me pause. I was eager to get them on my MPX magazines and see how they performed in real-world scenarios, but that user review I saw gave me pause.
Real-World Testing: Putting Ghost Inc Ghost MOAB SIG MPX Baseplates to the Test
First Use Experience
My first test involved fitting the Ghost Inc Ghost MOAB Baseplates onto my SIG MPX magazines. The initial attempt to install one was frustrating. It was extremely difficult to get the baseplate to seat correctly, requiring significantly more force than expected.
I tested it at my local shooting range, a controlled environment where I could focus on the magazine changes. The conditions were dry and mild, ideal for testing gear without environmental interference. After finally getting them installed, the fit was less than perfect, with some magazines exhibiting a noticeable wobble.
Upon loading the magazines and attempting rapid reloads, the flared design did offer a slightly improved grip over the factory baseplates. However, the plastic material felt slick, especially with even slightly sweaty hands. The “finger grooves” were more like small scallops and provided minimal purchase.
Extended Use & Reliability
After several weeks of use, the Ghost Inc Ghost MOAB Baseplates have not held up well. I’ve seen some significant wear and tear on the polymer, especially around the edges where they contact the magazine well. I also started experiencing the same issues as the user reviewer, I could not get the baseplate to properly seat correctly.
The durability is questionable. The polymer shows scratches and scuffs easily, and I worry about their long-term resilience to impacts. Cleaning is straightforward; wiping them down with a cloth is sufficient.
Compared to my experience with Magpul products, these baseplates are a significant disappointment. Magpul polymer baseplates and extensions have stood up to years of hard use, while the Ghost Inc product shows wear after only a few weeks. The reliability just isn’t there.
Breaking Down the Features of Ghost Inc Ghost MOAB SIG MPX Baseplates
Specifications
The Ghost Inc Ghost MOAB SIG MPX Baseplates are designed for 9mm SIG Sauer MPX magazines. They are constructed from a polymer material and come in black. The dimensions are listed as 0.75 X 4.45 X 5.85 inches.
These dimensions, while seemingly insignificant, impact the overall grip and handling of the magazine. The polymer material should provide some level of durability and impact resistance, but the actual performance is questionable. The listed caliber compatibility (9mm Luger) is crucial for proper function and safety.
Performance & Functionality
The primary function of the Ghost Inc Ghost MOAB Baseplates is to improve magazine handling and extraction. In theory, the flared design and finger grooves should make it easier to grip and remove magazines from the MPX. However, in practice, the slippery polymer and shallow grooves offer only a marginal improvement over the factory baseplates.
The baseplates do not reliably seat properly on the magazines, leading to wobble and potential feeding issues. The debris evacuation ports are a nice concept, but their effectiveness is questionable. The overall performance is underwhelming, and the product fails to meet expectations.
Design & Ergonomics
The design incorporates a flared bottom and finger grooves, intended to enhance ergonomics. The build quality, however, leaves much to be desired. The polymer feels cheap and doesn’t inspire confidence.
The baseplates are not particularly user-friendly to install. The tight fit and lack of clear instructions make the process frustrating. There is a noticeable learning curve to getting them installed and seated correctly, which detracts from the overall experience.
Durability & Maintenance
Based on my testing, I don’t expect these baseplates to last very long under heavy use. The polymer is prone to scratching and wear, and the overall construction feels flimsy. The price point does not reflect the poor durability.
Maintenance is simple – wiping them down is all that’s needed. Repair is not really an option; if they break, they need to be replaced. The low durability is a significant concern.
Accessories and Customization Options
The Ghost Inc Ghost MOAB Baseplates do not come with any accessories. The dimpled features on the bottom provide a surface for labeling the magazines. Compatibility with other brands’ accessories is limited, as they are specifically designed for MPX magazines.
The lanyard or pull tab attachment point is a potentially useful feature, but the small size of the hole limits its practicality. There are no real customization options beyond labeling. The lack of accessories and customization options is disappointing.
Pros and Cons of Ghost Inc Ghost MOAB SIG MPX Baseplates
Pros
- Slightly improved grip over factory baseplates (in theory).
- Flared design aids in magazine extraction (again, in theory).
- Debris evacuation ports (potentially useful).
Cons
- Poor fit and finish; difficult to install.
- Slippery polymer material reduces grip.
- Questionable durability; prone to wear and tear.
- Overpriced for the quality and performance offered.
Who Should Buy Ghost Inc Ghost MOAB SIG MPX Baseplates?
These baseplates are ideal for someone looking for a very minor improvement over the factory SIG MPX baseplates on a very tight budget and with low expectations.
I would advise anyone serious about performance or durability to skip this product. There are far better aftermarket options available.
Must-have modifications would be a textured grip tape applied to the baseplates to compensate for the slippery polymer.
Conclusion on Ghost Inc Ghost MOAB SIG MPX Baseplates
The Ghost Inc Ghost MOAB SIG MPX Baseplates promise a lot but deliver very little. The design is sound in theory, but the execution is lacking. The poor fit, slippery material, and questionable durability make this product a disappointment.
The price of $12.04 is not justified for the quality and performance offered. There are better alternatives available for a similar price point.
I would not personally recommend the Ghost Inc Ghost MOAB SIG MPX Baseplates. Save your money and invest in a higher-quality aftermarket baseplate from a reputable manufacturer like Magpul or Strike Industries. These baseplates just aren’t worth it.