Let’s Dive into GG&G Ring Inserts for Flashlight Mounts
The GG&G Ring Inserts for Flashlight Mounts are a simple yet ingenious solution for a common problem: mounting smaller diameter flashlights to standard 1-inch weapon mounts. GG&G, a name synonymous with quality tactical accessories, offers these Delrin inserts to bridge the gap between flashlight size and mount compatibility. For those of us who’ve amassed a collection of lights over the years, these inserts can save you from buying a whole new mounting system.
I stumbled upon these inserts while trying to mount an older Streamlight TL-2 to my AR-15. I had a perfectly good 1-inch GG&G flashlight mount already installed, but the TL-2’s .9-inch diameter meant it was just swimming inside the ring. Instead of buying a new mount, these inserts seemed like a practical and economical solution.
Upon receiving the GG&G Ring Inserts for Flashlight Mounts, my initial impression was favorable. The Delrin material felt solid and well-machined. They also had a smooth finish. I was replacing some makeshift cardboard shims, so my expectations were instantly exceeded.
Compared to buying a dedicated .9-inch mount, or even trying other DIY solutions like using electrical tape (which is a disaster waiting to happen), these inserts offered a clean, professional, and secure solution. They were more appealing than universal mounts that often feel bulky and less stable. I chose the GG&G inserts specifically because of GG&G’s reputation for quality and the promise of a precise fit.
I was pleasantly surprised by the simple elegance of the design. They seemed like they would be both easy to install and effective. I was eager to see how they would perform in the field.
Real-World Testing: Putting GG&G Ring Inserts for Flashlight Mounts to the Test
First Use Experience
My first test of the GG&G Ring Inserts for Flashlight Mounts was at my local shooting range. I installed the TL-2 light on my AR-15 and ran several drills, focusing on transitions between targets and manipulating the weapon with the light activated. The range was dry and moderately warm.
The inserts held the flashlight securely in place. There was no noticeable wobble or movement during firing. Activating and deactivating the light was seamless. This confirmed the setup didn’t interfere with the flashlight’s functionality.
The inserts were incredibly easy to install, requiring no tools beyond what was needed for the standard 1-inch mount itself. After the first use, I was impressed with how simple, yet effective, these GG&G inserts were.
Extended Use & Reliability
After several months of regular use, including multiple range trips and a few night-time hog hunts, the GG&G Ring Inserts for Flashlight Mounts have proven to be remarkably durable. They have shown no signs of wear or tear, despite exposure to recoil, temperature changes, and general handling. The inserts have remained snug and secure.
Maintenance has been virtually non-existent. A quick wipe down with a damp cloth after a range session is all that’s needed to keep them clean. They easily outperform any makeshift solution I’ve tried in the past. They have provided consistent and reliable performance.
Compared to relying on friction alone or using makeshift shims, the GG&G Ring Inserts for Flashlight Mounts are a clear upgrade in terms of stability, security, and overall peace of mind. I had used them in conjunction with a Rayovac light on my shotgun. They significantly outperform any other method of adapting flashlight sizes I’ve used.
Breaking Down the Features of GG&G Ring Inserts for Flashlight Mounts
Specifications
- Outside Diameter: 1 inch. This allows for compatibility with standard 1-inch flashlight mounts.
- Inside Diameter: 0.9 inches. This accommodates flashlights with a .900″ outside diameter.
- Material: Delrin thermoplastic. Delrin offers a good balance of strength, flexibility, and resistance to wear and tear.
- Compatibility: Designed to work seamlessly with the GG&G One Inch Flashlight Mounting Ring GGG-1195. They also work with most quality 1 inch rings.
- Intended Use: Allows mounting of smaller diameter flashlights, like the Streamlight TL2 and TL3, in standard 1-inch mounts.
These specifications are important because they define the flashlight compatibility, mount integration, and overall durability of the system. The 1-inch outside diameter ensures that the setup will interface with a wide range of existing weapon mounts. The Delrin material is crucial for withstanding recoil and environmental stress, ensuring a long service life.
Performance & Functionality
The GG&G Ring Inserts for Flashlight Mounts perform their job exceptionally well: securely holding a smaller diameter flashlight within a 1-inch mount. The inserts eliminate any wobble or play. They provide a stable platform for the flashlight, leading to consistent light placement and target illumination.
The primary strength is their simplicity and effectiveness. There’s nothing complicated about the design or installation. The only real weakness is that they are specific to .9-inch diameter lights.
They definitely meet and exceed expectations. I was anticipating a functional but perhaps somewhat flimsy solution. What I got was a robust and reliable system that has held up admirably under demanding conditions.
Design & Ergonomics
The design is minimalist and functional, prioritizing ease of use and reliable performance. The Delrin material is lightweight and provides a snug fit without damaging the flashlight body. The GG&G Ring Inserts for Flashlight Mounts are exceptionally user-friendly.
There is absolutely no learning curve. Anyone familiar with basic weapon accessories can install these inserts in a matter of minutes.
Durability & Maintenance
The Delrin material is known for its durability and resistance to solvents, temperature changes, and impacts. These inserts should last for many years with proper care. Maintenance is minimal.
A periodic wipe down with a clean cloth is all that’s required to remove dust and debris. These are expected to last a very long time with proper usage.
Accessories and Customization Options
The GG&G Ring Inserts for Flashlight Mounts are primarily designed to work with the GG&G One Inch Flashlight Mounting Ring, but they are compatible with most quality 1-inch rings. There are no other accessories directly associated with the inserts themselves. Their purpose is to facilitate the use of existing accessories.
The inserts do not offer much in the way of customization. They only have one specific purpose. Their inherent adaptability to different 1-inch mounting systems is their greatest strength.
Pros and Cons of GG&G Ring Inserts for Flashlight Mounts
Pros
- Cost-Effective: Significantly cheaper than buying a new dedicated mount for a specific flashlight.
- Durable: Made from robust Delrin thermoplastic for long-lasting performance.
- Easy Installation: Simple and quick installation with no specialized tools required.
- Secure Fit: Provides a stable and wobble-free platform for smaller diameter flashlights.
- Versatile: Compatible with most 1-inch flashlight mounts.
Cons
- Limited Compatibility: Only works with flashlights that have a .900″ outside diameter.
- Specific Use Case: Does one thing, but does it very well. If you don’t need to adapt a .9 inch light, these have no value.
Who Should Buy GG&G Ring Inserts for Flashlight Mounts?
The GG&G Ring Inserts for Flashlight Mounts are perfect for:
- Firearms enthusiasts who want to mount a Streamlight TL2 or TL3, or any flashlight with a .900″ diameter, to their weapon.
- Anyone who already owns a 1-inch flashlight mount and doesn’t want to buy a new one for a smaller light.
- Tactical users who need a reliable and secure way to mount their flashlight.
Who should skip this product? Anyone who has a flashlight that already fits a 1-inch mount, or uses lights that require a different mount size.
A must-have accessory is a quality 1-inch flashlight mount like the GG&G One Inch Flashlight Mounting Ring. A quality flashlight that is .9 inches in diameter is also a necessity.
Conclusion on GG&G Ring Inserts for Flashlight Mounts
The GG&G Ring Inserts for Flashlight Mounts are a simple, effective, and affordable solution for mounting smaller diameter flashlights to standard 1-inch mounts. They are made from durable Delrin, easy to install, and provide a secure fit, making them a worthwhile investment for anyone who needs to adapt their existing mounting system. The inserts’ value proposition is excellent.
I would absolutely recommend these inserts to anyone in need of this particular adapter. They are a high-quality product from a reputable manufacturer. The GG&G Ring Inserts for Flashlight Mounts are a testament to the fact that sometimes the simplest solutions are the best. If you’re struggling to mount a .9-inch flashlight, don’t hesitate – pick up a set of these inserts. You won’t be disappointed.