Let’s Dive into Forster Co-Ax Press Protective Cover w/ drawstring
The Forster Co-Ax Press Protective Cover w/ drawstring isn’t the sexiest piece of reloading equipment you’ll ever buy, but it’s a crucial one. This cover, crafted by Forster, is designed to protect your valuable Co-Ax single-stage press from dust, dirt, and moisture, ensuring its longevity and consistent performance. It’s a simple but effective solution to a common problem: keeping your reloading setup clean and ready for action.
My reloading bench is located in a corner of my garage, which, despite my best efforts, tends to accumulate sawdust and general grime. I needed a reliable cover to prevent this debris from fouling my press, saving me valuable time and effort in cleaning. The Forster Co-Ax Press Protective Cover w/ drawstring seemed like a perfect solution, offering protection and ease of use.
Upon unboxing, I immediately noticed the quality of the 420D Nylon material. It felt durable and breathable, reassuring me that it would protect the press without trapping moisture. The drawstring closure seemed robust and easy to operate, and the overall design was simple and functional.
I considered a few alternatives, including a generic tarp and a custom-made cover from a local tailor. However, the Forster cover’s specific design for the Co-Ax press and its breathable material made it the clear winner. The generic tarp wouldn’t fit properly and the custom cover seemed like overkill and was more expensive.
My first impression was positive. The Forster Co-Ax Press Protective Cover w/ drawstring seemed like a well-made and practical accessory that would keep my reloading press clean and protected. I was eager to put it to the test and see how it held up in my somewhat challenging garage environment.
Real-World Testing: Putting Forster Co-Ax Press Protective Cover w/ drawstring to the Test
First Use Experience
My first use of the Forster Co-Ax Press Protective Cover w/ drawstring was immediately after a reloading session where I was working with graphite-coated bullets. The cover was quickly slipped over the press, and the drawstring was cinched tight. This ensured that graphite dust was kept off the press.
The cover performed admirably, keeping the graphite dust and other airborne particles from settling on the exposed surfaces of the press. It was incredibly easy to use; simply slip it over the press and tighten the drawstring. No complications, no fuss.
I didn’t encounter any immediate issues, although I did note that the cover, while fitting snugly, didn’t completely seal the bottom of the press. However, this wasn’t a major concern as most of the dust and grime tend to accumulate on the upper surfaces.
Extended Use & Reliability
After several weeks of use, the Forster Co-Ax Press Protective Cover w/ drawstring has proven its worth. It effectively shields my press from dust, sawdust, and the occasional spill. The 420D Nylon has held up well with no signs of tearing or abrasion.
The cover is easy to maintain; a quick wipe down with a damp cloth is all it takes to remove any accumulated dust or grime. I haven’t noticed any degradation of the material despite its exposure to varying temperatures and humidity levels in my garage.
Compared to my previous method of using a makeshift plastic sheet, the Forster cover is a significant improvement. It’s more effective, more convenient, and provides a much better aesthetic. It easily outperforms the plastic sheet.
Breaking Down the Features of Forster Co-Ax Press Protective Cover w/ drawstring
Specifications
- Material: Breathable 420D Nylon. This material provides a balance of durability and breathability, preventing moisture buildup while protecting the press from dust and debris.
- Closure: Drawstring with cord lock. The drawstring and cord lock allow for a snug and secure fit, keeping the cover in place and preventing contaminants from entering.
- Color: Black. A practical color that doesn’t show dirt easily and blends well with most reloading bench setups.
- Compatibility: Fits all Co-Ax single-stage presses. Designed specifically for Forster’s Co-Ax press, ensuring a perfect fit.
- Additional Features: Three spacious outside pockets. Provides extra storage for small reloading tools and accessories.
These specifications matter because they directly impact the cover’s ability to protect the press and its ease of use. The breathable nylon prevents rust, the drawstring ensures a snug fit, and the pockets provide added convenience. This all contributes to a positive user experience and extends the life of the reloading press.
Performance & Functionality
The Forster Co-Ax Press Protective Cover w/ drawstring performs its primary function admirably: protecting the reloading press from dust and debris. It’s easy to put on and take off, and the drawstring closure ensures a secure fit. It does exactly what it advertises.
The main strength of the cover is its simplicity and effectiveness. It’s a no-frills solution that works. A minor weakness is the lack of a complete seal at the bottom.
The cover meets my expectations. I was looking for a simple and effective way to protect my reloading press, and this cover delivers on that promise.
Design & Ergonomics
The design of the Forster Co-Ax Press Protective Cover w/ drawstring is straightforward and functional. The black 420D Nylon material is durable and feels well-made. The weight is negligible, adding no extra burden to the reloading bench.
The cover is user-friendly. There’s no learning curve; simply slip it over the press and tighten the drawstring. It doesn’t get any simpler than that.
Durability & Maintenance
The 420D Nylon material appears to be quite durable and should last for years with proper care. I haven’t noticed any signs of wear and tear after several weeks of use. It gives the impression that it will last for a long time.
Maintenance is simple; a quick wipe down with a damp cloth is all that’s needed. The material is resistant to stains and doesn’t require any special cleaning products. This helps in extending the lifespan of the Forster Co-Ax Press Protective Cover w/ drawstring.
Accessories and Customization Options
The Forster Co-Ax Press Protective Cover w/ drawstring doesn’t require any additional accessories for its intended purpose. However, the three spacious outside pockets can be used to store small reloading tools, such as primer pocket cleaning brushes or deburring tools. The Forster Co-Ax Press Protective Cover w/ drawstring does allow some customization by storing needed tools and accessories.
I am not aware of any specific customization options for this cover, but the pockets do add a degree of versatility. The cover can accommodate any popular accessories needed for the press.
Pros and Cons of Forster Co-Ax Press Protective Cover w/ drawstring
Pros
- Effective Protection: Keeps the reloading press clean and free from dust, dirt, and debris.
- Durable Material: Constructed from breathable 420D Nylon for long-lasting use.
- Easy to Use: Simple slip-on design with a drawstring closure for a secure fit.
- Convenient Storage: Three spacious outside pockets for storing small reloading tools.
- Specifically Designed: Fits all Forster Co-Ax single-stage presses perfectly.
Cons
- Lack of Complete Seal: Doesn’t completely seal the bottom of the press, potentially allowing some dust to enter from below.
- Basic Design: The design is purely functional and may not appeal to those seeking a more aesthetically pleasing cover.
Who Should Buy Forster Co-Ax Press Protective Cover w/ drawstring?
The Forster Co-Ax Press Protective Cover w/ drawstring is perfect for reloaders who value protecting their investment and keeping their reloading bench clean. It’s especially useful for those who reload in dusty or potentially messy environments like garages or workshops. It provides peace of mind for all reloaders.
This product might not be necessary for reloaders who have a dedicated, climate-controlled reloading room. Also, those who meticulously clean their press after every use might not find the cover essential. If you have a clean space for your press, this cover is most likely not needed.
A must-have accessory to complement the cover would be a small storage container for frequently used reloading tools that can be kept in the cover’s pockets. An additional accessory would be the Forster Co-Ax press.
Conclusion on Forster Co-Ax Press Protective Cover w/ drawstring
The Forster Co-Ax Press Protective Cover w/ drawstring is a simple but effective solution for protecting your valuable reloading press from dust, dirt, and moisture. Its durable construction, ease of use, and practical design make it a worthwhile investment for any serious reloader. It provides protection for reloading investment.
At $25.99, the price is justified for the level of protection and convenience it offers. It’s a small price to pay to ensure the longevity and consistent performance of your Forster Co-Ax press. The price is well worth the peace of mind you will get.
I would personally recommend the Forster Co-Ax Press Protective Cover w/ drawstring to any reloader who wants to keep their equipment clean and protected. It’s a practical and affordable accessory that will save you time and effort in the long run. Protect your investment. Get yours today!