First Impressions of Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount promises a straightforward way to modernize a classic pistol. Evolution Gun Works (EGW) aims to deliver a solid, no-gunsmithing-required solution for mounting a red dot optic to the Beretta 92. This appeals to shooters who want improved target acquisition without permanent modifications.
I’ve been looking to enhance my Beretta 92’s capabilities for quicker target engagement during drills. A red dot seemed like the logical next step, but I wasn’t thrilled about the idea of having the slide milled. This mount appeared to be the ideal solution: a simple rear sight replacement.
Unboxing the EGW mount revealed a cleanly machined piece of metal with a matte black finish. The mount felt solid and appeared well-made, instilling confidence in its ability to withstand recoil. It was heavier than the factory rear sight, a potential indicator of its robust construction.
Compared to a universal optics rail I considered, this mount was much more appealing due to its streamlined design. Unlike some other options, it didn’t require any permanent modifications to the firearm. I chose this over a dovetail-mounted plate from another manufacturer because the EGW promised a lower profile and direct mounting to the slide.
My initial impression was cautiously optimistic. The mount seemed well-engineered, but I reserved full judgment until I could install it and test its performance at the range. I was both excited to potentially improve my Beretta 92’s performance and slightly apprehensive about whether the installation would be as seamless as advertised.
Real-World Testing: Putting Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount to the Test
First Use Experience
I first tested the Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount at my local outdoor range, focusing on rapid target acquisition drills. The weather was slightly overcast, providing a good test of the optic’s visibility in less-than-ideal lighting conditions. I ran through several magazines, drawing from a holster and engaging targets at distances of 7 to 25 yards.
Installation was fairly straightforward, requiring only a punch and a hammer to remove the original rear sight and install the mount. The Leupold DeltaPoint Pro attached securely to the mount, providing a solid and repeatable zero. I had to make minor adjustments to the red dot upon initial installation.
The initial experience was positive. The red dot significantly improved my target acquisition speed, especially when transitioning between multiple targets. There were no immediate issues, and the mount appeared to hold zero well after the first 100 rounds.
Extended Use & Reliability
After several months of consistent use, the Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount has proven to be a reliable addition to my Beretta 92. I’ve put approximately 500 rounds through the pistol with the mount installed, and it has maintained its zero without any issues. I cleaned and re-tightened the mounting screws after the first 200 rounds as a precaution.
The mount shows no noticeable signs of wear and tear, and the finish has held up well despite regular handling and cleaning. A quick wipe-down with a lightly oiled cloth after each range session is all the maintenance it requires. I had to add a drop of blue Loctite to the screws after about 300 rounds to ensure they remained secure.
Compared to my previous iron sight setup, the red dot, facilitated by the EGW mount, has significantly improved my accuracy and speed. It has exceeded my expectations for a simple, non-permanent mounting solution. The optic allows for faster follow-up shots and better performance in various lighting conditions.
Breaking Down the Features of Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount
Specifications
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount is specifically designed for the Beretta 92 series pistols. It’s compatible with Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot sights. The mount is constructed from lightweight aluminum with a matte black anodized finish.
The mount replaces the factory rear sight, utilizing the existing dovetail for a secure fit. It’s important to note that this mount is only for the specified red dot footprints, limiting its compatibility with other optics without an adapter plate. The Manufacturer is Evolution Gun Works.
Performance & Functionality
The primary function of the Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount is to provide a stable and low-profile platform for mounting a red dot sight. It performs this function admirably, maintaining zero even after extended shooting sessions. Its functionality is limited to only mounting certain red dots.
The mount’s strength lies in its simplicity and ease of installation. The only weakness is that the rear sight is removed, thus there are no backup iron sights should the optic fail. It meets my expectations for a drop-in red dot mounting solution.
Design & Ergonomics
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount is designed to be as unobtrusive as possible, maintaining a relatively low profile. The material is aluminum. The mount adds minimal weight to the slide.
The design is user-friendly, requiring no specialized tools or gunsmithing skills for installation. The matte black finish blends seamlessly with the Beretta 92’s slide. It has a slight learning curve in understanding proper installation techniques.
Durability & Maintenance
Constructed from durable aluminum, the Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount is built to withstand the rigors of regular use. With proper care and maintenance, it should last for many years. Cleaning involves simply wiping down the mount with a lightly oiled cloth after each range session.
Accessories and Customization Options
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount doesn’t come with any included accessories beyond the necessary mounting hardware. It is designed specifically for the Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot sights. While it doesn’t offer extensive customization options, its compatibility with these popular red dots provides ample flexibility. It is not compatible with all aftermarket Beretta 92 accessories.
Pros and Cons of Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount
Pros
- Easy installation with minimal tools required.
- Provides a stable and repeatable zero for red dot sights.
- Lightweight aluminum construction adds minimal weight to the slide.
- Low-profile design maintains a sleek appearance.
- Cost-effective alternative to slide milling.
Cons
- Removes the factory rear sight, eliminating backup iron sights.
- Limited compatibility only with Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, and Optima red-dot sights.
Who Should Buy Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount?
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount is perfect for Beretta 92 owners looking to add a red dot optic without permanent modifications. It’s ideal for competitive shooters, recreational shooters, and those seeking improved target acquisition for home defense. Anyone who values simplicity and ease of installation will find this mount appealing.
Those who rely on backup iron sights or want the flexibility to use a wider range of optics should skip this product. It’s also not suitable for those unwilling to occasionally check and tighten mounting screws. A must-have modification is a high-quality red dot sight like the Leupold DeltaPoint Pro.
Conclusion on Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount
The Evolution Gun Works Beretta 92 Leupold DeltaPoint Pro Mount offers a practical and affordable solution for mounting a red dot sight on a Beretta 92. The price of $63.99 is justified by its ease of installation, stable performance, and durable construction. I personally recommend it to anyone looking for a non-permanent way to modernize their Beretta 92.
If you’re ready to enhance your Beretta 92’s capabilities with a red dot, the EGW mount is a solid choice. Upgrade your Beretta 92 today.