DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System Review

First Impressions of DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System

The 1911 pistol is a classic, known for its reliability and stopping power, but also its stout recoil. The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System promises to tame that recoil, offering faster follow-up shots and improved accuracy. As someone who has spent years tinkering with and carrying 1911s, I was eager to see if this system could live up to the hype and justify its price.

As a seasoned shooter, I’m always looking for ways to enhance my firearms’ performance, especially recoil management. The recoil from my .45 ACP 1911 can be fatiguing during extended range sessions, and even in my 9mm 1911 I am trying to achieve optimal trigger control. I was hoping the DPM system could provide a noticeable improvement without significantly altering the pistol’s feel or reliability.

Upon receiving the system, I was immediately impressed by the quality of the materials. The Black Oxide Stainless Steel construction felt solid and durable, a testament to DPM‘s commitment to quality. The system replaced the factory guide rod and bushing, and I was impressed with the quality of the replacement bushing.

I considered other recoil reduction systems, some involving full-length guide rods and even modified frames. However, I chose the DPM system because it was a drop-in replacement, requiring no permanent modifications to my beloved 1911. The promise of user adjustability was also a major selling point, as I wanted to fine-tune the recoil reduction to my personal preference and ammunition choice.

My initial reaction was one of cautious optimism. The system looked well-engineered, but I was skeptical about whether it could truly make a significant difference in recoil management. I looked forward to putting it through its paces at the range.

Check Best Price HERE

Real-World Testing: Putting DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System to the Test

First Use Experience

My first test of the DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System took place at my local shooting range. I installed it on my Springfield Armory 1911 chambered in .45 ACP, using the lightest spring setting for initial evaluation. The installation was straightforward, though requiring a bushing wrench made the job easier and safer.

The range conditions were typical for a Texas afternoon – sunny and warm with a slight breeze. I ran a series of drills, focusing on rapid follow-up shots and double-taps, using both 230-grain FMJ and some of my personal 200-grain SWC reloads. The most noticeable difference was the perceived reduction in muzzle flip.

Initially, I experienced a few failures to fully return to battery, especially with the lighter target loads. This was quickly resolved by switching to the medium spring, which provided a more robust recoil impulse. After a couple of magazines, the system seemed to settle in, and the pistol ran reliably.

Extended Use & Reliability

After several weeks of consistent use, the DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System has proven to be a worthwhile addition to my 1911. I have put several hundred rounds through the pistol with the system installed, including a variety of ammunition types, and the reliability has been consistently excellent.

The Black Oxide Stainless Steel finish has held up well, showing no signs of wear or corrosion despite regular use and cleaning. Cleaning the system is no more difficult than cleaning the standard guide rod and bushing. A quick wipe-down with a lightly oiled cloth is all that’s needed to keep it functioning smoothly.

Compared to my previous experience with the stock recoil system, the DPM system offers a noticeable improvement in recoil management. Muzzle flip is reduced, allowing for faster and more accurate follow-up shots. This is especially beneficial during rapid-fire drills and shooting competitions. It’s not a night-and-day difference, but it’s enough to make a positive impact on my shooting performance.

Breaking Down the Features of DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System

Specifications

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System boasts several key specifications:

• Manufacturer: DPM.
• Caliber Compatibility: 9mm, .40 S&W, and .45 ACP 1911s with a 5-inch barrel.
• Material: Stainless Steel.
• Finish: Black Oxide.
• Gun Make: 1911 Platform.
• Gun Model: 1911.

These specifications are important because they ensure compatibility with a wide range of 1911 pistols. The Stainless Steel construction provides excellent corrosion resistance and durability, while the Black Oxide finish adds a layer of protection and a sleek appearance.

Performance & Functionality

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System is designed to reduce recoil and muzzle flip, allowing for faster follow-up shots and improved accuracy. It achieves this through a multi-spring system that absorbs and dissipates recoil energy more effectively than a traditional single-spring recoil system.

The system’s strengths lie in its noticeable reduction in muzzle flip and improved control during rapid fire. The ability to adjust the spring weight allows users to fine-tune the system to their specific ammunition and shooting style. However, the system may require some experimentation to find the optimal spring setting for different loads.

The DPM system generally meets expectations, offering a tangible improvement in recoil management without negatively impacting reliability. While it won’t turn your .45 ACP into a .22, it does make a noticeable difference in controllability and shooting comfort.

Design & Ergonomics

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System is well-designed and constructed from high-quality materials. The Black Oxide Stainless Steel gives it a professional look and feel. The weight is comparable to the stock guide rod and bushing, so it doesn’t significantly alter the balance of the pistol.

The system is relatively user-friendly, although some mechanical aptitude is helpful for installation and adjustment. The included instructions are clear and concise, and the system is easy to disassemble for cleaning and maintenance.

Durability & Maintenance

The Black Oxide Stainless Steel construction of the DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System suggests it should last for many years with proper care. Regular cleaning and lubrication are essential to ensure smooth operation and prevent corrosion.

The system is relatively easy to maintain and repair. All the components are readily accessible, and replacement springs are available from DPM if needed.

Accessories and Customization Options

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System is primarily a stand-alone upgrade, but its compatibility with other 1911 accessories is noteworthy. It works seamlessly with standard 1911 grips, triggers, and other aftermarket parts.

Because the system is contained within the slide, it does not interfere with the use of rail-mounted accessories, such as lights and lasers. Be sure to use a quality bushing wrench to ensure proper installation and prevent damage to the bushing or slide.

Pros and Cons of DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System

Check Best Price HERE

Who Should Buy DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System?

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System is perfect for:

• Competitive shooters looking for an edge in speed and accuracy.
• Enthusiasts who enjoy customizing and upgrading their 1911 pistols.
• Anyone who finds the recoil of their 1911 uncomfortable or fatiguing.
• Shooters who want to improve their control and accuracy during rapid fire.

Those who should skip this product:

• Those on a very tight budget, as cheaper alternatives exist.
• Shooters who are completely satisfied with the stock recoil system.
• Individuals who are uncomfortable disassembling and reassembling their 1911.

Must-have accessories or modifications:

• A quality bushing wrench is essential for installation and disassembly.
• Consider a set of different weight recoil springs for further customization.

Conclusion on DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System

The DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System is a well-engineered and effective upgrade for any 1911 pistol. It offers a noticeable reduction in recoil and muzzle flip, leading to improved control, accuracy, and faster follow-up shots. While it comes at a premium price, the quality of materials and the tangible performance benefits justify the investment for serious shooters and enthusiasts.

The value proposition is strong if you prioritize performance and are willing to spend a bit more for a high-quality product. The ability to fine-tune the system to your specific ammunition and shooting style is a significant advantage.

I would personally recommend the DPM 1911 5in Barrel Bushing Only 9mm/40 S&W/.45 ACP Mechanical Recoil Reduction System to anyone looking to enhance the shooting experience of their 1911 pistol. If you’re seeking improved control, faster follow-up shots, and reduced felt recoil, the DPM system is a worthwhile upgrade. Give it a shot and feel the difference!