The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO Made a Bold First Impression
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO isn’t the most glamorous piece of kit, but it’s a crucial component for anyone looking to modernize their Sig P320X series pistol. This adapter plate promises to bridge the gap between the Sig’s RXP ROMEO1 Pro cut and the popular Trijicon RMR/SRO, as well as Holosun’s 407C, 507C, 508C, and 508T red dot sights. It’s a simple piece of black anodized aluminum, but its purpose is significant: unlocking a wider range of optic choices for a beloved platform.
I’d been grappling with the limitations of the factory Romeo1 Pro footprint on my P320 X-Carry for months. The Romeo1 Pro is a decent optic, but I wanted to experiment with the Trijicon RMR and Holosun 507C, ubiquitous sights known for their durability and feature sets. The C&H Precision adapter seemed like the most straightforward solution, avoiding the expense and lead time of milling the slide.
Unboxing the CHP adapter plate was uneventful, but the quality was immediately apparent. The anodized finish looked flawless, and the included mounting hardware felt robust. It wasn’t flashy, but it exuded competence, like a well-made tool ready for hard work.
I considered several other options, including a direct slide mill and other adapter plates from lesser-known brands. Direct milling was too permanent and costly, while the cheaper adapter plates raised concerns about reliability and proper fit. The reputation of C&H Precision Weapons for quality and precision ultimately swayed my decision.
My first impression was cautiously optimistic. The adapter plate felt solid and well-made, but the proof would be in the installation and performance. It was a practical purchase driven by necessity, not excitement, but the potential to significantly enhance my P320’s capabilities was definitely enticing.
Real-World Testing: Putting C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO to the Test
First Use Experience
My initial testing ground for the C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO was my local outdoor shooting range. I mounted the adapter to my Sig P320 X-Carry slide and then attached a Holosun 507C red dot sight. The entire process was relatively straightforward, taking about 15 minutes with the provided hardware.
The first range session was a success, with approximately 200 rounds fired through the P320. I wanted to see if the adapter would loosen or shift during operation. The Holosun remained rock solid on the adapter plate throughout the session, and the adapter plate itself showed no signs of movement.
The ease of use was immediately noticeable. Zeroing the Holosun was simple, and the red dot significantly improved my target acquisition speed. No issues arose during the first use, exceeding my expectations regarding the adapter’s ability to provide a stable mounting platform.
Extended Use & Reliability
After several months and approximately 1,000 rounds, the C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO continues to perform flawlessly. I’ve exposed it to a variety of conditions, from sunny range days to humid training sessions. The adapter has not exhibited any loosening or shifting, maintaining a consistently reliable zero.
Durability has been impressive. The anodized finish shows minimal wear, even after repeated holster draws and exposure to cleaning solvents. There are no signs of corrosion or degradation, demonstrating the quality of materials and construction.
Maintenance is minimal. I simply wipe down the adapter plate along with the rest of the slide during my regular firearm cleaning routine. The robust construction and corrosion-resistant finish make maintenance a breeze.
Compared to my previous experiences with other aftermarket parts, the C&H Precision adapter has significantly outperformed them in reliability and durability. It has transformed my P320 X-Carry into a more versatile and capable platform. It no longer lags behind other, newer firearm platforms.
Breaking Down the Features of C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO
Specifications
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO is designed to convert the Sig P320X (X-FIVE, X-COMPACT, X-CARRY) with RXP ROMEO1 Pro slide cut to accept Trijicon RMR/SRO, Holosun 407C, 507C, 508C, and 508T optics. It features an anodized finish for enhanced durability and corrosion resistance. The adapter includes all necessary mounting hardware for a secure and straightforward installation.
The anodized finish is crucial for resisting scratches and corrosion from sweat, solvents, and the elements. The inclusion of all mounting hardware eliminates guesswork and ensures proper installation. This small piece of metal allows for mounting of many optics.
Performance & Functionality
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO performs its job exceptionally well, providing a stable and reliable mounting platform for popular red dot sights. The adapter maintains zero even after extended use and under various conditions, enhancing accuracy and target acquisition speed. Its installation is simple, and it adds minimal bulk to the slide.
The primary strength is its rock-solid reliability; the adapter does not shift or loosen during operation. The only potential weakness is the added height, which may require slightly taller iron sights for co-witnessing. Overall, it exceeds expectations by providing a seamless and dependable solution for optic compatibility.
Design & Ergonomics
The build quality is excellent. The adapter is machined from high-quality aluminum and features a durable anodized finish. The weight is negligible, adding minimal bulk to the slide.
The design is user-friendly, with straightforward installation instructions. There is a slight learning curve in ensuring proper torque of the mounting screws, but the process is generally simple.
Durability & Maintenance
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO is built to last, constructed from robust materials and finished with a corrosion-resistant coating. With proper care, it should provide years of reliable service. The adapter is easy to maintain, requiring only occasional cleaning with a standard firearm solvent.
Accessories and Customization Options
The CHP adapter plate comes with all necessary mounting screws. It facilitates the use of various Trijicon RMR/SRO and Holosun red dot sights on the Sig P320X series. While the adapter itself doesn’t offer further customization, the optics it allows for provide extensive customization options in terms of reticle, brightness, and features. The most relevant customization option is the ability to choose between a wide range of popular red dot sights.
Pros and Cons of C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO
Pros
- Enables mounting of popular Trijicon RMR/SRO and Holosun red dot sights on Sig P320X series pistols.
- Provides a stable and reliable mounting platform, maintaining zero even after extended use.
- Durable anodized finish resists scratches and corrosion.
- Straightforward installation with included mounting hardware.
- Cost-effective alternative to slide milling.
Cons
- Adds slight height to the optic, potentially requiring taller iron sights for co-witnessing.
- Requires careful torque of mounting screws to ensure secure installation.
Who Should Buy C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO?
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO is perfect for Sig P320X owners who want to upgrade their optics to the more popular Trijicon RMR/SRO or Holosun models without permanently modifying their slide. It is also ideal for those seeking a cost-effective and reversible solution for optic compatibility. It’s especially useful for competitive shooters or those who use their P320 for home defense.
Those who prefer the original Romeo1 Pro optic or those who are comfortable with permanent slide milling should skip this product. If you aren’t willing to take the time to properly install the adapter plate and optic, you may wish to skip this product.
A must-have accessory would be a set of taller iron sights for co-witnessing, depending on individual preference. A torque wrench is also highly recommended for proper installation of the mounting screws.
Conclusion on C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO
The C&H Precision Weapons CHP Adapter Plate RMR/SRO/HOLO is a well-designed and reliable adapter that delivers on its promises. It allows Sig P320X owners to easily mount popular red dot sights, enhancing the pistol’s versatility and performance. The price is justified by the quality, durability, and convenience it offers.
I would personally recommend the C&H Precision adapter to anyone seeking a simple and effective solution for optic compatibility on their Sig P320X. It’s a worthwhile investment that significantly improves the platform’s capabilities. Upgrade your Sig P320X today and experience the difference a quality adapter plate can make!